NIL# Introduction
As a daily Qubes OS user, I often feel the need to expose a port of a given qube to my local network. However, the process is quite painful because it requires doing the NAT rules on each layer (usually net-vm => sys-firewall => qube), it's a lost of wasted time.
I wrote a simple script that should be used from dom0 that does all the job: opening the ports on the qube, and for each NetVM, open and redirect the ports.
It's quite simple to use, the hardest part will be to remember how to copy it to dom0 (download it in a qube and use `qvm-run --pass-io` from dom0 to retrieve it).
Make the script executable with `chmod +x nat.sh`, now if you want to redirect the port 443 of a qube, you can run `./nat.sh qube 443 tcp`. That's all.
Be careful, the changes ARE NOT persistent. This is on purpose, if you want to always expose ports of a qube to your network, you should script its netvm accordingly.
The script is not altering the firewall rules handled by `qvm-firewall`, it only opens the ports and redirect them (this happens at a different level). This can be cumbersome for some users, but I decided to not touch rules that are hard-coded by users in order to not break any expectations.
Running the script should not break anything. It works for me, but it was only slightly tested though.
The avahi daemon uses the UDP port 5353. You need this port to discover devices on a network. This can be particularly useful to find network printers or scanners and use them in a dedicated qube.
It could be possible to use this script in qubes-rpc, this would allow any qube to ask for a port forwarding. I was going to write it this way at first, but then I thought it may be a bad idea to allow a qube to run a dom0 script as root that requires reading some untrusted inputs, but your mileage may vary.