[2022-09-07T00:14:41Z] testuser[m]12: could you make a PR for the solution that you proposed? [2022-09-07T00:16:31Z] also there's no point to manually parse elf. we have readelf for that [2022-09-07T00:19:04Z] and yes, default lib path can be other than /usr/lib [2022-09-07T00:21:18Z] ioraff: config-tool that llvm uses is shit. i'd avoid it [2022-09-07T00:21:58Z] adding special backend just for llvm is a fucking beyond sanity [2022-09-07T00:28:31Z] therefore i think that adding simple pkgconfig file is a proper and sane solution [2022-09-07T00:28:49Z] yo guys [2022-09-07T00:28:57Z] what happened with wayclip? [2022-09-07T00:29:10Z] i cant use in bemenu [2022-09-07T00:30:04Z] log? [2022-09-07T00:30:32Z] i see now [2022-09-07T00:30:52Z] git-bruh removed the symlink [2022-09-07T00:31:11Z] thats why [2022-09-07T00:31:25Z] bemenu only works with wl-clipboard [2022-09-07T00:32:41Z] evidently meson did so because of llvm's lack of interest in shipping one [2022-09-07T00:32:54Z] git-bruh did the right thing because wayclip isn't compatible with wl-clipboard. i suggest you to patch bemenu to add support for wayclip [2022-09-07T00:33:54Z] meson is crap. instead of solving problems they implement workarounds [2022-09-07T00:45:57Z] is this the power of just ten more years of wayland development? [2022-09-07T00:55:36Z] how wl-clipboard author's inability to write safe code is related to wayland development? [2022-09-07T01:05:14Z] the implication is that clipboard access isn't a problem under X11 [2022-09-07T01:05:20Z] it's a joke [2022-09-07T01:05:23Z] = w= [2022-09-07T01:09:36Z] i'm fine with how clipboard implemented in wayland. if bemenu unable to implement native access to clipboard instead of using cli tool, that's their problem [2022-09-07T01:22:07Z] https://github.com/Cloudef/bemenu/pull/210 [2022-09-07T01:22:30Z] yep it's totally their failure [2022-09-07T01:22:46Z] they even failed to implement x11 clipboard access [2022-09-07T02:04:26Z] illiliti: solution = resolve after installation? Or ignore rpath libs? [2022-09-07T02:04:26Z] Hi [2022-09-07T02:05:45Z] the latter [2022-09-07T02:05:46Z] hi [2022-09-07T02:17:53Z] i'm not sure that resolving after installation is a good idea [2022-09-07T02:18:05Z] however i have to admit, i haven't found obvious problems with it [2022-09-07T02:30:31Z] There's no problem apart from the new deps not being in tarball [2022-09-07T02:30:44Z] Which could be annoying if you decide to remove the package and extra dependency and kiss i the package again [2022-09-07T02:38:08Z] i see [2022-09-07T02:39:15Z] actually, i don't think we should do such radical change [2022-09-07T02:39:57Z] so it's a kiss2 idea [2022-09-07T06:32:52Z] hello [2022-09-07T06:33:43Z] I have a problem since firefox 104.0.1 [2022-09-07T06:34:18Z] The problem persists with firefox 104.0.2 [2022-09-07T06:35:39Z] does someone have one of those version on his system and make a test ? [2022-09-07T06:36:19Z] I will give you the website which I can't access [2022-09-07T06:40:12Z] vouivre: I can test [2022-09-07T06:40:44Z] www.anibis.ch [2022-09-07T06:41:22Z] If I switch to firefox 104.0 there is no problem [2022-09-07T06:42:00Z] in what way can you not access it? [2022-09-07T06:42:43Z] does it work on your system ? [2022-09-07T06:43:03Z] wait, will reinstall one of those version to give you the error [2022-09-07T06:44:01Z] the page seems to load fine, yes [2022-09-07T06:44:07Z] hhhmmmm [2022-09-07T06:44:28Z] I get: "HHmm. We're having trouble to find that site" [2022-09-07T06:44:44Z] "We can't connect to the server anibis.ch" [2022-09-07T06:45:08Z] the page is blank with only that text [2022-09-07T06:47:09Z] what I also don't understand is that [2022-09-07T06:47:30Z] ping www.anibis.ch [2022-09-07T06:47:34Z] doesn't work [2022-09-07T06:48:13Z] that doesn't work for me either. they could just be blocking ping requests [2022-09-07T06:48:50Z] ok [2022-09-07T06:50:36Z] is it possible that it's related to [2022-09-07T06:50:38Z] https://github.com/kiss-community/repo/pull/86 [2022-09-07T06:50:46Z] ? [2022-09-07T06:51:27Z] It's possible. but I've been using system nss for months now without issue. [2022-09-07T06:51:33Z] are you using firefox-privacy? [2022-09-07T06:52:41Z] no, firefox without customization [2022-09-07T06:53:04Z] I try to rebuild nss and nspr. I will check if it changes something. [2022-09-07T06:56:24Z] it's not better. I tried to clear the history, I still can't access it. [2022-09-07T06:58:17Z] is it ok to raise an issue ? Or I could check something else ? [2022-09-07T07:01:02Z] maybe see if firefox spits something useful out to stderr? [2022-09-07T07:02:48Z] if I start firefox from terminal, I get [2022-09-07T07:06:49Z] https://0x0.st/ofmF.txt [2022-09-07T07:07:46Z] perhaps something related to javascript ? [2022-09-07T08:22:03Z] I'll try to revert the changes of [2022-09-07T08:22:10Z] https://github.com/kiss-community/repo/pull/86 [2022-09-07T08:22:17Z] and see what happen [2022-09-07T08:22:21Z] thanks! [2022-09-07T09:12:03Z] vouivre: do u have some other distro to try it on? [2022-09-07T09:12:15Z] could be due to switching to system nss but I doubt it [2022-09-07T09:14:08Z] loads fine fo rme [2022-09-07T09:25:19Z] hi [2022-09-07T10:00:25Z] no [2022-09-07T10:16:21Z] is it some random picture on the internet? [2022-09-07T10:17:23Z] no [2022-09-07T14:36:12Z] testuser[m]12: I have no other distro to test with [2022-09-07T14:37:19Z] I have built firefox 104.0.2 and it works fine without the switch to nss system [2022-09-07T14:38:28Z] I will make one last test: I'll take the build file and compile with "--without-system-nss/nspr" [2022-09-07T14:38:36Z] I'll report if it works. [2022-09-07T14:38:43Z] but the site works fine for me with system nss [2022-09-07T14:38:51Z] (with vpn) [2022-09-07T14:39:52Z] I don't understand why only one site doesn't work. [2022-09-07T14:40:41Z] did u try a vpn? [2022-09-07T14:41:15Z] but the problem happened the first time with version 104.0.1 [2022-09-07T14:41:24Z] I have no vpn [2022-09-07T14:41:35Z] try with one [2022-09-07T14:42:24Z] I don't know what to use. Can I use something online or do I have to install something ? [2022-09-07T14:43:25Z] wait leave that [2022-09-07T14:43:42Z] what does curl -Lv https://www.anibis.ch/ say? [2022-09-07T14:44:02Z] does it work on other devices ? [2022-09-07T14:45:20Z] * Could not resolve host: www.anibis.ch [2022-09-07T14:45:28Z] * Closing connection 0 [2022-09-07T14:45:35Z] curl: (6) Could not resolve host: www.anibis.ch [2022-09-07T14:46:02Z] but with my compiled version of firefox I can access it [2022-09-07T14:46:03Z] then it's not a firefox issue [2022-09-07T14:46:32Z] curl is the baseline for any network stuff, there's probably something else at play [2022-09-07T14:46:52Z] did u try changing your dns server [2022-09-07T14:46:59Z] in /etc/resolv.conf [2022-09-07T14:48:35Z] no, but what I have to change exactly ? [2022-09-07T14:48:51Z] try any other nameserver temporarily [2022-09-07T14:49:04Z] echo nameserver 1.1.1.1 | ssu tee /etc/resolv.conf [2022-09-07T14:49:06Z] like 1.1.1.1 [2022-09-07T14:49:19Z] I have three lines with nameserver [2022-09-07T14:49:40Z] just add this one temporarily, those three are set by dhcpcd [2022-09-07T14:49:45Z] delete others [2022-09-07T14:50:03Z] or wait did u set those manually? [2022-09-07T14:51:16Z] no, changed nothing in this file [2022-09-07T14:51:25Z] then u can just run tee [2022-09-07T14:51:32Z] I switch to a firefox version which doesn't work [2022-09-07T14:53:28Z] no, it doesn't work [2022-09-07T14:53:44Z] but I can access other websites [2022-09-07T14:54:05Z] did u try the site on your phone [2022-09-07T14:54:09Z] it seems like an isp issue [2022-09-07T14:54:15Z] cuz even curl cant resolve it [2022-09-07T14:54:23Z] hhhmm, do I have to restard dhcpcd after changing resolv.conf [2022-09-07T14:54:24Z] ? [2022-09-07T14:54:30Z] restart [2022-09-07T14:54:52Z] no [2022-09-07T14:54:58Z] it'll just overwrite those values [2022-09-07T14:55:04Z] resolv.conf changes are effective immeditately [2022-09-07T14:55:42Z] on my phone there is no problem. But it doesn't use my network at home. I'll try with wifi. [2022-09-07T14:56:29Z] no problem on my phone with only wifi [2022-09-07T14:57:18Z] can u make a hotspot from your phone and connect kiss to it [2022-09-07T15:05:15Z] I restarted my computer it didn't work, I don't know why [2022-09-07T15:05:36Z] I have connected kiss to my hotspot and I can connect to the site! [2022-09-07T15:09:04Z] it might be possible that your isp is tampering dns requests [2022-09-07T15:09:13Z] like mine does, just to say [2022-09-07T15:10:30Z] maybe your phone encrypts dns queries using e.g DoT [2022-09-07T15:10:37Z] you phone is android? [2022-09-07T15:11:15Z] Yea android has dot by default [2022-09-07T15:11:19Z] With poogle dns [2022-09-07T15:11:37Z] yes. With custom rom, I don't know if it changes something [2022-09-07T15:12:46Z] you could try to enable DoH support in firefox [2022-09-07T15:12:57Z] or use dnscrypt [2022-09-07T15:14:15Z] is dnscrypt something I have to package ? [2022-09-07T15:17:30Z] no, it's packaged in community [2022-09-07T15:17:42Z] dnscrypt-proxy [2022-09-07T15:17:53Z] also you could use my dnscrypt(hare-dnscrypt), but i feel it isn't complete enough to be usable for everyone [2022-09-07T15:18:27Z] it's lacking some things... [2022-09-07T15:19:35Z] I'm testing, I just saw the option to set in firefox [2022-09-07T15:23:55Z] yes, it works! Thank you! [2022-09-07T15:24:23Z] nice [2022-09-07T15:24:54Z] could you just explain in a few words what is the problem ? Sincerly I have no idea.... [2022-09-07T15:25:19Z] illiliti: can u check pr [2022-09-07T15:25:29Z] your isp does some dirty things with dns it seems [2022-09-07T15:25:34Z] will do [2022-09-07T15:27:57Z] ok, thanks! [2022-09-07T15:29:06Z] like you are both online, I'll have another question about mdev. [2022-09-07T15:30:55Z] to use mdev I need the file /proc/sys/kernel/hotplug [2022-09-07T15:31:03Z] it wasn't present on my system [2022-09-07T15:31:38Z] you don't need it [2022-09-07T15:32:47Z] it's legacy way of hotplugging. you should be fine without it. just enable mdev service [2022-09-07T15:32:49Z] after compiling...... so I don't need to compile CONFIG_UEVENT_HELPER ? [2022-09-07T15:33:00Z] no [2022-09-07T15:33:41Z] how ? mdev -d ? mdev -sd ? [2022-09-07T15:34:57Z] /etc/sv/mdev/run [2022-09-07T15:39:05Z] thanks! I can look now further at the udev rule emulation. [2022-09-07T15:42:07Z] i wonder how do you plan to implement it [2022-09-07T15:44:03Z] i hope not via implementing parser for udev rules [2022-09-07T15:44:35Z] cuz that would be pita. trust me, i know... [2022-09-07T15:45:09Z] I will first only have a look at the proposal for the mdev wrapper [2022-09-07T15:46:17Z] because I had no time until now to read the entire discussion [2022-09-07T15:51:49Z] hm [2022-09-07T15:56:41Z] testuser[m]12: i tested PR with dummy package. works fine [2022-09-07T15:58:00Z] don't think i'll manage to test firefox in the near time [2022-09-07T15:58:23Z] i don't have rust installed [2022-09-07T16:06:14Z] ioraff: pixman is a dependency of foot, why isn't it listed in the depends? [2022-09-07T16:11:24Z] probably a mistake [2022-09-07T16:23:03Z] illiliti: Where do u get chromium from [2022-09-07T16:23:11Z] The last bin i. Gave was 103 [2022-09-07T16:23:13Z] Or something [2022-09-07T16:30:39Z] i'm still using it [2022-09-07T16:30:48Z] i landlock'ed it, so i'm fine [2022-09-07T16:37:06Z] lol [2022-09-07T16:37:44Z] Is landlock similar to user namespaces? [2022-09-07T16:40:30Z] it's similar to unveil() [2022-09-07T17:01:49Z] illiliti: how do u use it [2022-09-07T17:04:10Z] It seems like it has to be implemented in code of program [2022-09-07T17:21:04Z] illiliti: https://github.com/kisslinux/kiss/issues/295 ?