2020-04-14T04:12:34 #kisslinux <muevoid> Hello everybody I am currently attempting to get broadcom-wl working on my friends pc with kiss linux. However the driver seems to work and ifconfig -a shows the interface running and recieving bytes and sending and wpa_supplicant says connected I gave her an ip with dhcpcd however she still cannot do ping google.com or any dns servers such as 8.8.8.8
2020-04-14T04:32:46 #kisslinux <dilyn> how are you connecting to the network via wpa_supplicant?
2020-04-14T04:34:05 #kisslinux <muevoid> I did wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant.conf and generated the conf file with wpa_passphrase SSID passphrase | tee /etc/wpa_supplicant.conf (obvi replaced SSID and passphrase with hers)
2020-04-14T04:34:16 #kisslinux <muevoid> then after I did dhcpcd && dhcpcd wlan0
2020-04-14T04:36:06 #kisslinux <dilyn> what's the output of ifconfig?
2020-04-14T04:40:34 #kisslinux <muevoid> wlan0     Link encap:Ethernet HWaddr B8:09:8a:BC:A3:3B
2020-04-14T04:40:34 #kisslinux <muevoid> 		  inet6 addr: fe80::ba09:8aff:febc:a33b/64  Scope:Link
2020-04-14T04:40:35 #kisslinux <muevoid> 		  UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
2020-04-14T04:40:35 #kisslinux <muevoid> 		  RX packets:18688 errors:0 dropped:0 overruns:0 frame:388565
2020-04-14T04:40:35 #kisslinux <muevoid> 		  TX packets:17 errors:0 dropped:0 overruns:0 carrier:0
2020-04-14T04:40:37 #kisslinux <muevoid> 		  collisions:0 txqueuelen:1000
2020-04-14T04:40:39 #kisslinux <muevoid> 	      RX bytes:1381054 (1.3 MiB)  TX bytes:1646 (1.6 KiB)
2020-04-14T04:40:42 #kisslinux <muevoid> 	      Interrupt:18
2020-04-14T04:41:31 #kisslinux <muevoid> Sorry it took so long she doesnt have internet working on her pc so i manually had to type it
2020-04-14T04:41:38 #kisslinux <dilyn> that's fine hahah
2020-04-14T04:41:45 #kisslinux <dilyn> hmm
2020-04-14T04:41:58 #kisslinux <dilyn> I mean I had the exact same setup and it *just works* for me...
2020-04-14T04:42:09 #kisslinux <muevoid> yeah fair enough lol
2020-04-14T04:42:12 #kisslinux <dilyn> have you tried killing dhcpcd and wpa_supplicant and restarting them?
2020-04-14T04:42:27 #kisslinux <dilyn> that's always 80% of my problem with dhcpcd
2020-04-14T04:42:38 #kisslinux <muevoid> Yeah ive also had to try rebooting and switching the dns server but Ill have her try one more time
2020-04-14T04:44:37 #kisslinux <muevoid> Do you think it could possibly be the dns name servers or the lack of a normal inet addr?
2020-04-14T04:44:46 #kisslinux <muevoid> Cause that didnt seem to do anything
2020-04-14T04:45:16 #kisslinux <muevoid> Also yeah im using your fork of broadcom-wl for her pc
2020-04-14T04:45:29 #kisslinux <dilyn> if youcute haha
2020-04-14T04:45:42 #kisslinux <dilyn> I didn't even notice the lack of an inet ummm
2020-04-14T04:45:54 #kisslinux <muevoid> yeah it has a inet6 addr but not inet addr
2020-04-14T04:46:06 #kisslinux <muevoid> Im not sure if it matters im not very good with networking
2020-04-14T04:46:36 #kisslinux <dilyn> if you can't ping 8.8.8.8 if you can't ping 8.8.8.8 then changing dns servers won't do much for you
2020-04-14T04:46:46 #kisslinux <muevoid> yeah
2020-04-14T04:46:48 #kisslinux <dilyn> the real question is whether or not your actually connected to a router
2020-04-14T04:48:02 #kisslinux <muevoid> how would I check that just ping 192.168.0.1?
2020-04-14T04:48:16 #kisslinux <dilyn> assuming that's your router's ip haha
2020-04-14T04:49:04 #kisslinux <muevoid> well yeah lol hold on having her check her routers ip
2020-04-14T04:49:21 #kisslinux <dilyn> does she have an /etc/hosts file?
2020-04-14T04:50:22 #kisslinux <muevoid> yes she does
2020-04-14T04:56:25 #kisslinux <illiliti> muevoid: are you sure that dhcpd daemon running?
2020-04-14T04:58:19 #kisslinux <muevoid> yes im sure just had her check top and have had it work before with usb tethering
2020-04-14T05:01:12 #kisslinux <dilyn> do you have the dhcpcd service running at all?
2020-04-14T05:01:24 #kisslinux <dilyn> via udevd or w/e
2020-04-14T05:02:13 #kisslinux <muevoid> I might be stupid I am quite new to kiss myself. How would I check that to make sure?
2020-04-14T05:06:20 #kisslinux <dilyn> ls /var/service/
2020-04-14T05:06:47 #kisslinux <muevoid> theres nothing there
2020-04-14T05:12:39 #kisslinux <dilyn> it's perhaps possible that you aren't being assigned an ipv4 address (hence why it doesn't show up in ifconfig); does the computer show as connected on the router's side?
2020-04-14T05:13:43 #kisslinux <dilyn> it's possible that your router or modem wants a specific kind of address being assigned to it
2020-04-14T05:13:53 #kisslinux <muevoid> Having her check right now
2020-04-14T05:15:28 #kisslinux <muevoid> How would I make sure she has started dhcpcd with udevd?
2020-04-14T05:16:18 #kisslinux <dilyn> you would do 'ln -s /etc/sv/dhcpcd /var/service/; sv up dhcpcd'
2020-04-14T05:16:27 #kisslinux <dilyn> but I wouldn't do that until you can get it working manually
2020-04-14T05:16:39 #kisslinux <muevoid> kk
2020-04-14T05:17:26 #kisslinux <muevoid> No it does not show up as connected to the router
2020-04-14T05:18:38 #kisslinux <dilyn> f
2020-04-14T05:19:18 #kisslinux <muevoid> f indeed
2020-04-14T05:20:24 #kisslinux <muevoid> What I find weirder is I am able to scan for wifi networks with wpa_cli and again wpa_supplicant shows up as connected but wifi doesnt work and usb tethering works fine but not actual wifi
2020-04-14T05:21:01 #kisslinux <dilyn> that just means the problem isn't with dhcpcd *entirely*, only with how it's dealing with the router
2020-04-14T05:27:56 #kisslinux <muevoid> do you think I could possibly temporarily fix this via using a static ip with ifconfig?
2020-04-14T05:28:12 #kisslinux <dilyn> that might work
2020-04-14T05:28:18 #kisslinux <dilyn> unfortunately i have to go to bed
2020-04-14T05:28:29 #kisslinux <muevoid> No worries thanks for all the help!
2020-04-14T05:28:37 #kisslinux <dilyn> for sure; good luck!
2020-04-14T05:34:57 #kisslinux <dilyn> wait
2020-04-14T05:35:16 #kisslinux <dilyn> kill dhcpcd; what's the output when you run just dhcpcd wlan0?
2020-04-14T05:35:35 #kisslinux <muevoid> Sorry
2020-04-14T05:35:38 #kisslinux <muevoid> was working on it
2020-04-14T05:35:58 #kisslinux <muevoid> I will mess more with dhcpcd tommorow however it is working with a static ip using ifconfig
2020-04-14T05:36:08 #kisslinux <dilyn> nice!
2020-04-14T05:36:35 #kisslinux <dilyn> i just run dhcpcd wlan0, not dhcpcd && dhcpcd wlan0. it doesn't work the latter way
2020-04-14T05:36:43 #kisslinux <dilyn> but hey, if it works it works. don't touch it xD
2020-04-14T05:36:45 #kisslinux <dilyn> gngn
2020-04-14T06:10:58 #kisslinux <icyphox> I don't have a working KISS install at the moment. Or a computer, for that matter.
2020-04-14T06:11:30 #kisslinux <icyphox> It might be a while until I can push updates to my packages.
2020-04-14T10:01:19 #kisslinux <eudaldgr> hi, everyone
2020-04-14T10:02:05 #kisslinux <jedavies> Hey
2020-04-14T10:02:49 #kisslinux <eudaldgr> i have a problem with the process update, i bumped a package on my own repo, added to the `KISS_PATH` but when i do a simple `kiss u`, they update the git repo, but don't do the update of the package
2020-04-14T10:04:31 #kisslinux <eudaldgr> and if make a `kiss b [pkg]` they try to build the old version
2020-04-14T10:04:46 #kisslinux <eudaldgr> not the new one
2020-04-14T10:04:54 #kisslinux <merakor> Did you export the KISS_PATH
2020-04-14T10:05:00 #kisslinux <eudaldgr> yes
2020-04-14T10:05:56 #kisslinux <eudaldgr> i used this repo other times, but it's the first time i update something on my own repo
2020-04-14T10:06:33 #kisslinux <merakor> Can you paste your KISS_PATH?
2020-04-14T10:07:00 #kisslinux <eudaldgr> /home/eudaldgr/repos/eudald-kiss:/home/eudaldgr/repos/kiss-games:/home/eudaldgr/repos/kiss-garbage:/var/db/kiss/repo/core:/var/db/kiss/repo/extra:/var/db/kiss/repo/xorg:/var/db/community/community:
2020-04-14T10:08:08 #kisslinux <merakor> That's strange
2020-04-14T10:08:21 #kisslinux <eudaldgr> what?
2020-04-14T10:08:34 #kisslinux <merakor> Try only adding your personal repository to the path and updating
2020-04-14T10:09:07 #kisslinux <merakor> KISS_PATH=/home/eudalgr/repos/eudald-kiss kiss u
2020-04-14T10:09:11 #kisslinux <eudaldgr> but now `kiss` says that everything is up-to-date
2020-04-14T10:09:52 #kisslinux <eudaldgr> oh well now works
2020-04-14T10:11:49 #kisslinux <eudaldgr> i don't understand why
2020-04-14T10:13:04 #kisslinux <eudaldgr> thanks
2020-04-14T10:13:33 #kisslinux <merakor> It may be an exporting issue
2020-04-14T10:14:00 #kisslinux <eudaldgr> i have the export on my `.ashrc`
2020-04-14T10:15:40 #kisslinux <merakor> Try running sh -c 'echo $KISS_PATH'
2020-04-14T10:15:44 #kisslinux <merakor> with single quotes
2020-04-14T10:17:23 #kisslinux <eudaldgr> the same output
2020-04-14T10:22:34 #kisslinux <merakor> I am not sure what causes it
2020-04-14T10:23:00 #kisslinux <merakor> I had a similar problem before I started exporting the variable
2020-04-14T10:23:06 #kisslinux <merakor> But you are exporting it
2020-04-14T10:42:52 #kisslinux <eudaldgr> yeah i know
2020-04-14T10:43:01 #kisslinux <eudaldgr> i updated yet the package
2020-04-14T10:45:07 #kisslinux <eudaldgr> and someone know if it possible to run a `post-remove` on kiss?
2020-04-14T10:45:15 #kisslinux <eudaldgr> i know about post-install and pre-remove
2020-04-14T11:07:01 #kisslinux <merakor> eudaldgr: You can open an issue, or open a PR if you want it added. It hasn't been added as of yet.
2020-04-14T11:17:40 #kisslinux <eudaldgr> well i know
2020-04-14T11:17:44 #kisslinux <eudaldgr> thanks
2020-04-14T11:27:48 #kisslinux <dylan02> o/
2020-04-14T11:27:52 #kisslinux <dylan02> I'm back
2020-04-14T11:29:05 #kisslinux <illiliti> yay!
2020-04-14T11:29:37 #kisslinux <dylan02> Lots of PRs, issues etc huh
2020-04-14T11:29:43 #kisslinux <dylan02> I'm slowly going through each one
2020-04-14T11:31:50 #kisslinux <merakor> Welcome back!
2020-04-14T11:34:51 #kisslinux <dylan02> Thanks
2020-04-14T11:35:25 #kisslinux <claudia02> welcome back dylan02. glad to see you again. Y lots of work to do (:
2020-04-14T11:39:08 #kisslinux <dylan02> :P
2020-04-14T11:41:21 #kisslinux <eudaldgr> welcome back dylan02!
2020-04-14T11:44:34 #kisslinux <dylan02> Thanks
2020-04-14T11:44:40 #kisslinux <dylan02> How have things been?
2020-04-14T11:45:09 #kisslinux <dylan02> I've not had "free" internet access until now
2020-04-14T11:47:42 #kisslinux <claudia02> A lot new people have shown up, thats pretty nice
2020-04-14T11:48:40 #kisslinux <dzove855> welcome back dylan02
2020-04-14T11:48:53 #kisslinux <dylan02> o/
2020-04-14T11:50:41 #kisslinux <icyphox> dylan02! Good to have you back my dude.
2020-04-14T11:51:06 #kisslinux <icyphox> I guess it's now my turn to not have a working computer.
2020-04-14T11:53:06 #kisslinux <dylan02> What happened to yours?
2020-04-14T11:59:07 #kisslinux <fehawen> dylan02: Welcome back from the (laptop) dead
2020-04-14T11:59:42 #kisslinux <dylan02> Heh
2020-04-14T12:00:35 #kisslinux <fehawen> What's the internet issue, the café passworded theirs?
2020-04-14T12:01:49 #kisslinux <dylan02> Had pretty much no computer access
2020-04-14T12:02:05 #kisslinux <fehawen> I heard
2020-04-14T12:02:10 #kisslinux <fehawen> Got a new one then?
2020-04-14T12:02:14 #kisslinux <dylan02> Yeah
2020-04-14T12:02:33 #kisslinux <fehawen> Bad delivery times right now I assume
2020-04-14T12:03:52 #kisslinux <dylan02> Actually! It would have arrived 3ish days earlier, it just didn't fit in the delivery van on the Friday. :P
2020-04-14T12:04:41 #kisslinux <fehawen> Seriously? That van must've been crammed if they couldn't fit another item
2020-04-14T12:06:07 #kisslinux <dylan02> Yup
2020-04-14T12:06:45 #kisslinux <fehawen> A client soaked my XPS with her half litre caffe latte recently, had to put it in rice for a few days. It works now, but doesn't seem to be in great shape really.
2020-04-14T12:06:58 #kisslinux <fehawen> Might have to get a new one. What laptop did you get?
2020-04-14T12:07:37 #kisslinux <fehawen> I forgot how expensive new laptops are. I usually buy them used, cheap.
2020-04-14T12:09:34 #kisslinux <dylan02> It's an Honor Magicbook 14. It was 550 euros which is nice.
2020-04-14T12:10:32 #kisslinux <dylan02> Ryzen 3500u, 8GB ram, 256GB NVME SSD, etc
2020-04-14T12:11:09 #kisslinux <dylan02> It's actually way faster than my previous laptop :P
2020-04-14T12:11:33 #kisslinux <fehawen> Hah
2020-04-14T12:11:48 #kisslinux <fehawen> That's well cheap. Bargain
2020-04-14T12:12:13 #kisslinux <fehawen> Never heard of it though
2020-04-14T12:12:57 #kisslinux <dylan02> The company is owned by Huawei
2020-04-14T12:13:13 #kisslinux <dylan02> I'd never heard of it before either
2020-04-14T12:14:47 #kisslinux <fehawen> And caveats with AMD compared to Intel?
2020-04-14T12:15:49 #kisslinux <dylan02> One thing so far
2020-04-14T12:16:14 #kisslinux <dylan02> The integrated GPU in this laptop "steals" 1GB of the system's memory.
2020-04-14T12:16:50 #kisslinux <dylan02> So I have 6.9GB usable
2020-04-14T12:17:09 #kisslinux <dylan02> Other than that, it's been fine
2020-04-14T12:18:10 #kisslinux <fehawen> Hmm ok
2020-04-14T12:19:11 #kisslinux <fehawen> Missing that QHD/4K screen as well, ain't you? :)
2020-04-14T12:20:02 #kisslinux <dylan02> I'm actually happier now as I can once again use bitmap fonts
2020-04-14T12:20:30 #kisslinux <fehawen> Gosh :P
2020-04-14T12:38:45 #kisslinux <dilyn> welcome back dylan :)
2020-04-14T12:43:57 #kisslinux <dylan02> Thanks
2020-04-14T12:45:34 #kisslinux <konimex> just had a look at the laptop, my first thought was "I'll break it in 3 months or earlier" since I'm a little bit clumsy and the design looks a little bit too frail
2020-04-14T12:46:56 #kisslinux <konimex> what's the processor speed? and how many cores?
2020-04-14T12:47:33 #kisslinux <dylan02> 4 cores, 8 threads
2020-04-14T12:48:17 #kisslinux <dylan02> base clock 2.1Ghz, boost to 3.7Ghz
2020-04-14T12:49:05 #kisslinux <dylan02> Though boost is for single core :(
2020-04-14T12:49:43 #kisslinux <konimex> for 550 EUR the specs are actually good (at least here), pretty sure it'll be more expensive
2020-04-14T12:50:06 #kisslinux <dylan02> Yeah
2020-04-14T12:50:23 #kisslinux <dylan02> It was also on sale (80 euros off)
2020-04-14T12:51:23 #kisslinux <dylan02> The touchpad has no two finger scroll though :(
2020-04-14T12:52:03 #kisslinux <merakor> Pfft I use vim keys on surf to scroll :P
2020-04-14T12:52:11 #kisslinux <dylan02> I'm booting with an EFISTUB now
2020-04-14T12:52:23 #kisslinux <dylan02> It's really quick
2020-04-14T12:53:12 #kisslinux <merakor> For some reason, booting with grub is faster for me than EFISTUB
2020-04-14T12:55:17 #kisslinux <dylan02> I need to build rust now
2020-04-14T12:55:21 #kisslinux <dylan02> Fun
2020-04-14T13:00:28 #kisslinux <merakor> For firefox?
2020-04-14T13:01:09 #kisslinux <onodera> dylan02: I created a firefox 75 port
2020-04-14T13:01:12 #kisslinux <onodera> without dbus
2020-04-14T13:01:58 #kisslinux <onodera> might create a PR tonight for community, though maybe firefox* should be renamed to firefox-esr* then>
2020-04-14T13:04:09 #kisslinux <dylan02> I suppose so
2020-04-14T13:05:48 #kisslinux <dylan02> merakor: Yeah
2020-04-14T13:06:11 #kisslinux <dylan02> I also need to bump cbindgen
2020-04-14T13:22:06 #kisslinux <kiedtl> wb dylan o/
2020-04-14T13:22:20 #kisslinux <dylan02> o/
2020-04-14T13:29:34 #kisslinux <onodera>  This is weird man, remember the GLM package, where the maintainer removed the CMAKE target
2020-04-14T13:29:48 #kisslinux <onodera> many maintainers, including the arch one, opened issues
2020-04-14T13:30:03 #kisslinux <onodera> it seesm in the last few days the developer simply disabled the issue tracker
2020-04-14T13:30:09 #kisslinux <dylan02> lol
2020-04-14T13:30:13 #kisslinux <onodera> all old issues are gone as well
2020-04-14T13:30:39 #kisslinux <onodera> https://git.archlinux.org/svntogit/community.git/tree/trunk/PKGBUILD?h=packages/glm
2020-04-14T13:30:44 #kisslinux <onodera> I could go with the arch hack
2020-04-14T13:30:54 #kisslinux <onodera> but I am not sure if I prefer simpler install or this hacky stuff...
2020-04-14T13:32:27 #kisslinux <dylan02> Hm
2020-04-14T13:43:35 #kisslinux <claudia02> onodera: I created glm for kiss-games this way
2020-04-14T13:43:38 #kisslinux <claudia02> https://github.com/sdsddsd1/kiss-games/blob/master/glm/build
2020-04-14T13:45:04 #kisslinux <onodera> claudia02: ah cool, I might copy that
2020-04-14T13:45:20 #kisslinux <onodera> thought maybe it is better if just one of us maintains it? though it needs to be in community then
2020-04-14T13:46:20 #kisslinux <claudia02> y, I would then just drop it then and have an eye open when it gets dropped
2020-04-14T13:48:24 #kisslinux <eudaldgr> well i'm having some problem with `libdrm` update
2020-04-14T13:48:55 #kisslinux <eudaldgr> i try to build without nouveau or intel, i see the meson option on the gitlab repo
2020-04-14T13:49:02 #kisslinux <eudaldgr> but dosn't work
2020-04-14T13:52:19 #kisslinux <eudaldgr> well nothing yet. i always forgot the most stupid things
2020-04-14T13:58:52 #kisslinux <lieu> welcome back dylan!
2020-04-14T15:41:42 #kisslinux <lieu> dylan02: When the `Checking for missing dependencies` kick in and it outputs `Found <pkg> ... `, does that mean a dependency not in the depends file was found?
2020-04-14T15:41:46 #kisslinux <illiliti> dylan02: https://github.com/kisslinux/init/pull/14
2020-04-14T15:45:20 #kisslinux <lieu> Because if that's the case, then I should say it still outputs the dependencies even if they're in the depends file.
2020-04-14T15:47:33 #kisslinux <dylan02> lieu: I may revert it back to how it was. The idea I had when I made the change was to make it more helpful.
2020-04-14T15:49:13 #kisslinux <dylan02> illiliti: Thanks. Leaving some comments now.
2020-04-14T15:53:33 #kisslinux <dilyn> dylan02: re falkon-fix; it does seem like a strange place to go but everywhere I've read indicates that qt.conf has to go in the same directory as the binary. which is silly, but it's the only directory that worked
2020-04-14T15:53:42 #kisslinux <dylan02> Yeah
2020-04-14T15:53:47 #kisslinux <dylan02> Thought so
2020-04-14T15:57:43 #kisslinux <E5ten> dylan02: do you know of a POSIX sh way to get the effect of "comm -3 <(printf '%sn' "$var") <(printf '%sn' "$var2")"
2020-04-14T15:58:06 #kisslinux <dylan02> It'd have to be via files
2020-04-14T15:58:10 #kisslinux <E5ten> (preferably without writing one of them to a temp file)
2020-04-14T15:58:16 #kisslinux <dylan02> Yeah
2020-04-14T15:59:13 #kisslinux <dylan02> You could iterate with your own loop (and your own version of comm -3)
2020-04-14T16:03:40 #kisslinux <illiliti> dylan02: ping?
2020-04-14T16:04:53 #kisslinux <dylan02> Yeah
2020-04-14T16:04:55 #kisslinux <dylan02> Here
2020-04-14T16:05:25 #kisslinux <illiliti> check pr
2020-04-14T16:05:52 #kisslinux <lieu> dylan02: I may ask some question about kiss
2020-04-14T16:06:22 #kisslinux <dylan02> lieu: Sure
2020-04-14T16:08:47 #kisslinux <lieu> i'm still checking through
2020-04-14T16:09:11 #kisslinux <lieu> some gnu stuff seem to make it scream
2020-04-14T16:09:51 #kisslinux <dylan02> Your other messages didn't send??
2020-04-14T16:10:42 #kisslinux <lieu> i didn't send any q yet
2020-04-14T16:11:18 #kisslinux <lieu> ahh yes, the diff part under pkg_fixdeps
2020-04-14T16:11:42 #kisslinux <lieu> busybox diff only supports unified diffs
2020-04-14T16:11:48 #kisslinux <dylan02> Ah
2020-04-14T16:11:53 #kisslinux <dylan02> Yeah, I'm working on a fix
2020-04-14T16:12:02 #kisslinux <lieu> gnu diff requires -u
2020-04-14T16:12:18 #kisslinux <lieu> to be unified
2020-04-14T16:12:25 #kisslinux <dylan02> I'll most likely do it in the morning
2020-04-14T16:12:29 #kisslinux <dylan02> The backlog drained me
2020-04-14T16:12:31 #kisslinux <dylan02> :P
2020-04-14T16:12:48 #kisslinux <lieu> yeah
2020-04-14T16:13:01 #kisslinux <lieu> that's a lotta changes lol
2020-04-14T16:20:09 #kisslinux <dylan02> brb
2020-04-14T16:26:06 #kisslinux <eudaldgr> i have a problem with `libXslt` they don't find `libintl.la` when i build it
2020-04-14T16:27:48 #kisslinux <dylan02> eudaldgr: Contact the maintainer (Cem Keylan <cem⊙cc>)
2020-04-14T16:28:40 #kisslinux <eudaldgr> i think, maybe is a `gettext` related i have this some time ago, i re-builded all the packages i have installed, but the problem persist
2020-04-14T16:29:27 #kisslinux <eudaldgr> now i don't have `gettext` obvious, but i have some problems related to this package since i removed
2020-04-14T16:39:33 #kisslinux <eudaldgr> @illiliti it's yours the tinyramfs? it works with kiss?
2020-04-14T16:41:30 #kisslinux <illiliti> yep
2020-04-14T16:42:22 #kisslinux <eudaldgr> both?
2020-04-14T16:42:28 #kisslinux <eudaldgr> great
2020-04-14T16:46:25 #kisslinux <dylan02> brb
2020-04-14T17:17:29 #kisslinux <ominous_anonymou> eudaldgr I was able to build libXslt, but i got sloppy/lazy and didn't keep track of how i solved it :(
2020-04-14T17:18:43 #kisslinux <ominous_anonymou> i used ftp://xmlsoft.org/libxslt/libxslt-1.1.33.tar.gz with libxml2 as a dependency
2020-04-14T17:19:26 #kisslinux <dylan02> Builds fine here too
2020-04-14T17:22:06 #kisslinux <ominous_anonymou> my configure line was "./configure--prefix=/usr --disable-static"
2020-04-14T17:23:44 #kisslinux <illiliti> dylan02: any chance to include my patch - https://gist.github.com/illiliti/ef9ee781b5c6bf36d9493d99b4a1ffb6 in our busybox package? this patch useful for recovering and initramfs purposes
2020-04-14T17:29:03 #kisslinux <dylan02> Sure
2020-04-14T17:33:43 #kisslinux <illiliti> tnx
2020-04-14T17:36:46 #kisslinux <onodera> dylan02: I have been thinking about an idea, and I wonder what you think of it
2020-04-14T17:37:16 #kisslinux <onodera> when you run `go` commands, it uses the current working directory if no url or something has been given
2020-04-14T17:37:35 #kisslinux <onodera> so `go get <url>` gets and url, and `go get` gets the current working dir
2020-04-14T17:38:32 #kisslinux <onodera> same for `pkgmk` on crux, when you run it, it build `Pkgfile` in the current working dir
2020-04-14T17:39:16 #kisslinux <onodera> what do you think about this behavior with kiss, so `kiss b` would build the current working dir, `kiss c` get the checksums, etc.
2020-04-14T17:40:14 #kisslinux <kiedtl> onodera: not dylan but what do you think `kiss i` should do? find the appropriate pkg tarball and install it? or something else?
2020-04-14T17:40:20 #kisslinux <onodera> I really miss this behaviour from crux, I could just cd to a port, or even create a port that is not in the definted ports tree
2020-04-14T17:41:19 #kisslinux <onodera> with kiss I have to `kiss c pkgname` `kiss b pkgname` `kiss i pkgname`, and every time have to move my cursor left a few times in order to change the action (`c`, `b`, `i`)
2020-04-14T17:42:02 #kisslinux <onodera> kiedtl: yes, it would basically do `kiss i (dirname $PWD)`
2020-04-14T17:48:54 #kisslinux <merakor> onodera: use shell functions
2020-04-14T17:49:06 #kisslinux <onodera> no
2020-04-14T17:49:22 #kisslinux <merakor> why not
2020-04-14T17:49:37 #kisslinux <dylan02> onodera: Sure
2020-04-14T17:50:18 #kisslinux <onodera> merakor: nah I will if no one thinks this is a good idea, I just wanted to put it on the table
2020-04-14T17:51:25 #kisslinux <merakor> No, I do think that is a good idea
2020-04-14T17:51:32 #kisslinux <merakor> It was a mere suggestion
2020-04-14T18:01:52 #kisslinux <onodera> all my packages merged, feels good :)
2020-04-14T18:08:22 #kisslinux <merakor> dylan02: https://github.com/CarbsLinux/kiss/commit/8c131f85c4261dc83728adac7f90eebfad25aa35.patch
2020-04-14T18:13:30 #kisslinux <onodera> merakor: you are quick!
2020-04-14T18:13:38 #kisslinux <onodera> though how do you handle rebuilding all packages?
2020-04-14T18:14:02 #kisslinux <onodera> a * argument, or do I interpret this wrong?
2020-04-14T18:19:35 #kisslinux <merakor> You could go to your /var/db/kiss/installed directory and do 'kiss b *'
2020-04-14T18:20:21 #kisslinux <onodera> ahh i see
2020-04-14T18:20:34 #kisslinux <onodera> that's actually very unixy, I like it
2020-04-14T18:23:29 #kisslinux <merakor> Yeah, but there is a better way of doing this patch
2020-04-14T18:24:05 #kisslinux <merakor> This patch still doesn't care if it is building the package in the current directory
2020-04-14T18:24:50 #kisslinux <merakor> You could create a random directory with a name matching to some package, and it would build the package on top of your KISS_PATH
2020-04-14T18:25:24 #kisslinux <merakor> Should I make it so it ignores the KISS_PATH, or should I leave it this way?
2020-04-14T18:25:29 #kisslinux <merakor> What do you think?
2020-04-14T18:54:34 #kisslinux <onodera> I personally like it if it doesn't need to match. That way I could just create some temporary port that's not in my 'formal' ports tree. As long as it has all the valid files, such as build and verstion, I don't see why it shoudnt build.
2020-04-14T18:54:44 #kisslinux <onodera> @ merakor
2020-04-14T18:57:13 #kisslinux <merakor> Yeah, that makes sense
2020-04-14T19:05:28 #kisslinux <merakor> https://github.com/CarbsLinux/kiss/commit/62331a6b751fcbffea28d21b51ea9967c1b8e1d1.patch
2020-04-14T19:06:23 #kisslinux <merakor> This is the second patch
2020-04-14T22:07:46 #kisslinux <E5ten> I hate that local isn't POSIX, like it's really easy to get around by using the positional parameters to store local variables, but it would just be so much more convenient to not have to do that