Author: selco at t-online.de (Alexander Fritsch) Uploader: selco t-online de (Alexander Fritsch) Type: gfx/3d Version: 2.031 (Emerald-Anton) Architecture: m68k-amigaos Distribution: Aminet Date: 2022-11-25 Readme: http://aminet.net/gfx/3d/wcs.readme Downloads: 86
http://aminet.net/gfx/3d/wcs.lha
Ein deutscher Text findet sich weiter unten.
English
-------
This is a newly compiled version of World Construction Set 2.031.
WCS was developed by Gary R. Huber and Chris "Xenon" Hanson" from
Questar Productions. CanyonSet000.jpg is an example of what can be
created with this great program.
3DNature.com very gracefully released the source code of version 2.031
of this wonderful 3d terrain rendering package so it became possible
to recompile it with bebbos's new gcc. This is the result of adapting
the code to gcc and experimenting with the compiler with the goal of
speeding up rendering.
Thank you very much for this great software and for the chance to work
on it!
Requirements:
-------------
A fast Amiga equipped with an 68020 or higher processor and a math
coprocessor are needed to run WCS.
If you try running it on a 68000 CPU a "yellow guru" with address 0006 8020
will be shown. This is not a crash but to inform you about the problem.
If you run with the correct CPU but without FPU another "yellow guru" with
address 0006 8881 will be shown. This is again not a crash but a hint.
Installation:
-------------
You need a full installation of the commercial WCS 2 package on your Amiga.
Fortunately, the installation disks have been made available by 3DNature.
You can download the disk images in adf format from www.3dnature.com from
the Downloads -> Legacy Software section.
When installation is complete just copy the executables from this archive
into the WCS drawer.
WinUAE users:
-------------
For maximum speed select an 68020 or 68030 CPU, enable FPU, disable MMU,
enable JIT and select CPU Emulation Speed "Fastest possible" in WinUAE.
Use the 68020-60 version of WCS.
Speed:
------
Rendering of the example picture CanyonSet000.jpg, C=A4000T, 68040/25/16MB
original program, 2.04 release: 04:59:44
new 68040 version 03:57:40
i.e., one hour faster!
History:
--------
Version 2.031 (Emerald-Anton)
*Initial Aminet release of the recompiled package.
*Code changes to support gcc. Tiny issues fixed.
*Replacements for SAS/C specific functions.
*Executables care for stack memory and check CPU/FPU requirements.
Deutsch
-------
Dies ist ein neu compilierte Version vom World Construction Set 2.031.
WCS wurde von Gary R. Huber and Chris "Xenon" Hanson" von Questar Productions
entwickelt. CanyonSet000.jpg zeigt beispielhaft, was für realistische
Landschaften mit diesem großartigen Programm berechnet werden können.
3DNature.com hat die Quellen der Version glücklicherweise vor längerer Zeit
freigegeben, so daß es möglich wurde, das Programm mit Bebbo's gcc neu zu
compilieren. Hier ist das Ergebnis der Anpassung des Codes für gcc und
unzähliger Testläufe mit unterschiedlichen Compilereinstellungen. Das Ziel
dieser Bemühungen war dabei stets, die benötigte Rechenzeit zu verkürzen.
Vielen Dank Gary, Chris und 3DNature für dieses großartige Programm und für
die Möglichkeit, weiter daran arbeiten zu können!
Anforderungen:
--------------
Um mit WCS sinnvoll zu arbeiten, ist ein schneller Amiga Voraussetzung.
Es wird mindestens ein 68020 Prozessor benötigt. Des Weiteren muss ein
Mathe-Coprozessor vorhanden sein.
Sollte das Programm auf einer kleineren CPU gestartet werden, wird ein
"gelber Guru" mit der Adresse 0006 8020 angezeigt. Das ist kein Absturz,
sondern nur ein Hinweis, dass mindestens ein 68020 Prozessor vorhanden sein
muss. Danach wird WCS beendet.
Gleiches gilt, wenn kein Mathe-Coprozessor vorhanden ist. In diesem Fall wird
wieder ein "gelber Guru" angezeigt, diesmal mit der Adresse 0006 8881.
Damit wird signalisiert, dass ein 68881 Coprozessor erforderlich ist.
Der Amiga muss nicht rebootet werden, die Arbeit mit WCS ist aber nicht
möglich.
Installation:
-------------
Zunächst ist eine vollständige Installation des kommerziellen WCS 2 Paketes
erforderlich. Großzügigerweise stellt 3DNature.com auch die Installations-
disketten im ADF-Format zum freien Download für jedermann bereit. Sie befinden
sich auf www.3dnature.com unter Downloads -> Legacy Software.
Nach der Installation sind einfach die neuen Programmversionen aus diesem
Archiv in den WCS-Ordner zu kopieren.
WinUAE-Anwender:
----------------
Um die maximale Rechengeschwindigkeit unter WinUAE zu erreichen, sollten
folgende Einstellungen benutzt werden:
CPU 68020 oder 68030
enable FPU
disable MMU
enable JIT
CPU Emulation Speed "Fastest possible".
Unter WinUAE erreicht die 68020-60 Version die höchste Geschwindigkeit.
Geschwindigkeit:
----------------
Berechnung des Beispielbildes CanyonSet000.jpg, C=A4000T, 68040/25/16MB
originales Programm, 2.04 release: 04:59:44
neue 68040 Version: 03:57:40
also eine Stunde schneller!
PERMISSION UID GID PACKED SIZE RATIO METHOD CRC STAMP NAME ---------- ----------- ------- ------- ------ ---------- ------------ ---------- [generic] 475279 1207900 39.3% -lh5- b3d2 Nov 25 10:54 wcs_68020 [generic] 487840 1021932 47.7% -lh5- d863 Nov 25 10:54 wcs_68020-60 [generic] 938 1727 54.3% -lh5- bfca Nov 25 10:54 WCS_68020-60.info [generic] 938 1727 54.3% -lh5- bfca Nov 25 10:54 WCS_68020.info [generic] 492239 1029296 47.8% -lh5- 8e23 Nov 25 10:54 wcs_68040 [generic] 938 1727 54.3% -lh5- bfca Nov 25 10:54 WCS_68040.info [generic] 480569 1000464 48.0% -lh5- c162 Nov 25 10:54 wcs_68060 [generic] 938 1727 54.3% -lh5- bfca Nov 25 10:54 WCS_68060.info ---------- ----------- ------- ------- ------ ---------- ------------ ---------- Total 8 files 1939679 4266500 45.5% Nov 26 02:49
Aminet © 1992-2022 Urban Müller and the Aminet team. Aminet contact address: <aminet aminet net>