Back to module index
Go to module by name
asyncio
asyncio.transports
Abstract Transport class.
Classes
BaseTransport
Base class for transports.
close(self)
Close the transport.
Buffered data will be flushed asynchronously. No more data
will be received. After all buffered data is flushed, the
protocol's connection_lost() method will (eventually) be
called with None as its argument.
get_extra_info(self, name, default=None)
Get optional transport information.
get_protocol(self)
Return the current protocol.
is_closing(self)
Return True if the transport is closing or closed.
set_protocol(self, protocol)
Set a new protocol.
DatagramTransport
Interface for datagram (UDP) transports.
abort(self)
Close the transport immediately.
Buffered data will be lost. No more data will be received.
The protocol's connection_lost() method will (eventually) be
called with None as its argument.
close(self)
Close the transport.
Buffered data will be flushed asynchronously. No more data
will be received. After all buffered data is flushed, the
protocol's connection_lost() method will (eventually) be
called with None as its argument.
get_extra_info(self, name, default=None)
Get optional transport information.
get_protocol(self)
Return the current protocol.
is_closing(self)
Return True if the transport is closing or closed.
sendto(self, data, addr=None)
Send data to the transport.
This does not block; it buffers the data and arranges for it
to be sent out asynchronously.
addr is target socket address.
If addr is None use target address pointed on transport creation.
set_protocol(self, protocol)
Set a new protocol.
ReadTransport
Interface for read-only transports.
close(self)
Close the transport.
Buffered data will be flushed asynchronously. No more data
will be received. After all buffered data is flushed, the
protocol's connection_lost() method will (eventually) be
called with None as its argument.
get_extra_info(self, name, default=None)
Get optional transport information.
get_protocol(self)
Return the current protocol.
is_closing(self)
Return True if the transport is closing or closed.
is_reading(self)
Return True if the transport is receiving.
pause_reading(self)
Pause the receiving end.
No data will be passed to the protocol's data_received()
method until resume_reading() is called.
resume_reading(self)
Resume the receiving end.
Data received will once again be passed to the protocol's
data_received() method.
set_protocol(self, protocol)
Set a new protocol.
SubprocessTransport
close(self)
Close the transport.
Buffered data will be flushed asynchronously. No more data
will be received. After all buffered data is flushed, the
protocol's connection_lost() method will (eventually) be
called with None as its argument.
get_extra_info(self, name, default=None)
Get optional transport information.
get_pid(self)
Get subprocess id.
get_pipe_transport(self, fd)
Get transport for pipe with number fd.
get_protocol(self)
Return the current protocol.
get_returncode(self)
Get subprocess returncode.
See also
http://docs.python.org/3/library/subprocess#subprocess.Popen.returncode
is_closing(self)
Return True if the transport is closing or closed.
kill(self)
Kill the subprocess.
On Posix OSs the function sends SIGKILL to the subprocess.
On Windows kill() is an alias for terminate().
See also:
http://docs.python.org/3/library/subprocess#subprocess.Popen.kill
send_signal(self, signal)
Send signal to subprocess.
See also:
docs.python.org/3/library/subprocess#subprocess.Popen.send_signal
set_protocol(self, protocol)
Set a new protocol.
terminate(self)
Stop the subprocess.
Alias for close() method.
On Posix OSs the method sends SIGTERM to the subprocess.
On Windows the Win32 API function TerminateProcess()
is called to stop the subprocess.
See also:
http://docs.python.org/3/library/subprocess#subprocess.Popen.terminate
Transport
Interface representing a bidirectional transport.
There may be several implementations, but typically, the user does
not implement new transports; rather, the platform provides some
useful transports that are implemented using the platform's best
practices.
The user never instantiates a transport directly; they call a
utility function, passing it a protocol factory and other
information necessary to create the transport and protocol. (E.g.
EventLoop.create_connection() or EventLoop.create_server().)
The utility function will asynchronously create a transport and a
protocol and hook them up by calling the protocol's
connection_made() method, passing it the transport.
The implementation here raises NotImplemented for every method
except writelines(), which calls write() in a loop.
abort(self)
Close the transport immediately.
Buffered data will be lost. No more data will be received.
The protocol's connection_lost() method will (eventually) be
called with None as its argument.
can_write_eof(self)
Return True if this transport supports write_eof(), False if not.
close(self)
Close the transport.
Buffered data will be flushed asynchronously. No more data
will be received. After all buffered data is flushed, the
protocol's connection_lost() method will (eventually) be
called with None as its argument.
get_extra_info(self, name, default=None)
Get optional transport information.
get_protocol(self)
Return the current protocol.
get_write_buffer_limits(self)
Get the high and low watermarks for write flow control.
Return a tuple (low, high) where low and high are
positive number of bytes.
get_write_buffer_size(self)
Return the current size of the write buffer.
is_closing(self)
Return True if the transport is closing or closed.
is_reading(self)
Return True if the transport is receiving.
pause_reading(self)
Pause the receiving end.
No data will be passed to the protocol's data_received()
method until resume_reading() is called.
resume_reading(self)
Resume the receiving end.
Data received will once again be passed to the protocol's
data_received() method.
set_protocol(self, protocol)
Set a new protocol.
set_write_buffer_limits(self, high=None, low=None)
Set the high- and low-water limits for write flow control.
These two values control when to call the protocol's
pause_writing() and resume_writing() methods. If specified,
the low-water limit must be less than or equal to the
high-water limit. Neither value can be negative.
The defaults are implementation-specific. If only the
high-water limit is given, the low-water limit defaults to an
implementation-specific value less than or equal to the
high-water limit. Setting high to zero forces low to zero as
well, and causes pause_writing() to be called whenever the
buffer becomes non-empty. Setting low to zero causes
resume_writing() to be called only once the buffer is empty.
Use of zero for either limit is generally sub-optimal as it
reduces opportunities for doing I/O and computation
concurrently.
write(self, data)
Write some data bytes to the transport.
This does not block; it buffers the data and arranges for it
to be sent out asynchronously.
write_eof(self)
Close the write end after flushing buffered data.
(This is like typing ^D into a UNIX program reading from stdin.)
Data may still be received.
writelines(self, list_of_data)
Write a list (or any iterable) of data bytes to the transport.
The default implementation concatenates the arguments and
calls write() on the result.
WriteTransport
Interface for write-only transports.
abort(self)
Close the transport immediately.
Buffered data will be lost. No more data will be received.
The protocol's connection_lost() method will (eventually) be
called with None as its argument.
can_write_eof(self)
Return True if this transport supports write_eof(), False if not.
close(self)
Close the transport.
Buffered data will be flushed asynchronously. No more data
will be received. After all buffered data is flushed, the
protocol's connection_lost() method will (eventually) be
called with None as its argument.
get_extra_info(self, name, default=None)
Get optional transport information.
get_protocol(self)
Return the current protocol.
get_write_buffer_limits(self)
Get the high and low watermarks for write flow control.
Return a tuple (low, high) where low and high are
positive number of bytes.
get_write_buffer_size(self)
Return the current size of the write buffer.
is_closing(self)
Return True if the transport is closing or closed.
set_protocol(self, protocol)
Set a new protocol.
set_write_buffer_limits(self, high=None, low=None)
Set the high- and low-water limits for write flow control.
These two values control when to call the protocol's
pause_writing() and resume_writing() methods. If specified,
the low-water limit must be less than or equal to the
high-water limit. Neither value can be negative.
The defaults are implementation-specific. If only the
high-water limit is given, the low-water limit defaults to an
implementation-specific value less than or equal to the
high-water limit. Setting high to zero forces low to zero as
well, and causes pause_writing() to be called whenever the
buffer becomes non-empty. Setting low to zero causes
resume_writing() to be called only once the buffer is empty.
Use of zero for either limit is generally sub-optimal as it
reduces opportunities for doing I/O and computation
concurrently.
write(self, data)
Write some data bytes to the transport.
This does not block; it buffers the data and arranges for it
to be sent out asynchronously.
write_eof(self)
Close the write end after flushing buffered data.
(This is like typing ^D into a UNIX program reading from stdin.)
Data may still be received.
writelines(self, list_of_data)
Write a list (or any iterable) of data bytes to the transport.
The default implementation concatenates the arguments and
calls write() on the result.