SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ��������������������������������������������������������������������Ŀ � United States +1 408 438-8771 � United Kingdom +44 628 478011 � ��������������������������������������������������������������������Ĵ � Germany +49 89 140-9331 � Singapore +65 227-2217 � ���������������������������������������������������������������������� (C)opyright 1991 ST-42100N Wren 9 FH SCSI-2 Fast � Synchronous Spindles option DC � Power � �����������������������������͸ /���������\ ��������P�W�A��������͵:SCSI:Cable:::::::::::::::::1�͵ 0 0 0 0 ��� �Ŀ ���Ŀ �����������������������������; ��5�G�G�12� �o�o o o o o o o�o+o� �������1 �������1 �������1 �o�o o o o o o o�o-o� �������� �������� �������� �1� 4 2 1 ����� Terminator SIPS � � ����� � � � � � � � � �� Motor Start Delay (16 secs * ID) � � � � ���� Parity check enable � � � ������ Motor Start option enable � � ���������� Drive ID's, ID 0 (none) if only SCSI device � �������������� Terminator power to the Bus (vertical) ���������������� Terminator power from Drive, default (vertical) � Terminator power from Bus (lower horizontal) LED ���Ŀ (Viewed from front of drive) � GND � 0 � � ����������������������P�W�A��������������������������������������� o o o J6 pin-1 (+5v) ----o o o � � � Remote LED connection ��� � � Write Protect Remote ����� � Switch cable connection � � Factory Use Only ������� ST-42100N WREN 9 FH UNFORMATTED CAPACITY (MB) ________________2,200 FORMATTED CAPACITY (xx SECTORS) (MB) _____1,900* AVERAGE SECTORS PER TRACK (with spares)___96 ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________38,595 CYLINDERS ________________________________2,573 (user) HEADS ____________________________________15 DISCS (5.25 inch) ________________________8 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______20 to 31 EXTERNAL TRANSFER RATE (Mbytes/sec) ______10.0 Sync. SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.33 BUFFER ___________________________________256 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 Fast BYTES PER TRACK __________________________57,200 avg. SECTORS PER DRIVE ________________________3,705,120 TPI (TRACKS PER INCH) ____________________2,150 BPI (BITS PER INCH) ______________________ AVERAGE ACCESS (ms) ______________________12.95 SINGLE TRACK SEEK (ms) ___________________2 MAX FULL SEEK (ms) _______________________29 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _4.5 +12V TYPICAL (amps) __1.5 +5V START-UP (amps) __0.8 +5V TYPICAL (amps) ___0.6 TYPICAL (watts) ______21 MAXIMUM (watts) ______58 LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE * 512 bytes per sector, one spare sector per track, two spare cylinders per unit. Already low-level formatted at the factory. Seagate reserves the right to change, without notice, product offerings or specifications. (10/31/91)