💾 Archived View for alaskalinuxuser.ddns.net › 2022-12-15.gmi captured on 2024-09-29 at 00:21:02. Gemini links have been rewritten to link to archived content
-=-=-=-=-=-=-
">
68w, https://alaskalinuxuser3.ddns.net/wp-content/uploads/2022/12/IMG_0337-
225x300.jpg 225w, https://alaskalinuxuser3.ddns.net/wp-content/uploads/2022/12/
IMG_0337-1152x1536.jpg 1152w, https://alaskalinuxuser3.ddns.net/wp-content/
uploads/2022/12/IMG_0337.jpg 1458w" sizes="(max-width: 768px) 100vw, 768px"
/>
I had a fun day at work today. Often my work revolves around cleaning and
paperwork, with the usual computer issues that need reset or rebooted to be
resolved. Occasionally there will be a more complex computer issue with the
virtual machine host, or raid arrays if I’m lucky. Today was exceptionally good
though, because I had to do some component level board troubleshooting!
Not much to say, since I don’t think I can post any sort of in depth diagram of
what I was working on, but we had a unit that had failed, and was supposed to
be returned to the depot for repair.
I hate having to send stuff back to depot when I feel confident that we can
perform the repair ourselves.
So, with a new employee in tow, we cracked open the case to this unit that is
used to split up multiple VGA inputs and apply power over the ZIF (zero
insertion force) outputs. A few quick checks with a multi-meter were all we
needed to see that power came in, and went to a transformer, a half wave
rectifier circuit, smoothed out by a few resistors and capacitors, and then
went to a transistor that was a voltage regulator.
Sure enough, it was a L7815acv, which in this case takes a 24v input and gives
you a 15v output. The only problem was it only put out 12 volts. Input was
plenty strong, with a positive 24 volts, so this was certainly the failure
point. We placed one on order, and once it came in we had this unit up and
running in no time!
Linux – keep it simple.
[1] https://www.mouser.com/ProductDetail/STMicroelectronics/
L7815ACV?qs=Aez0sHNrW%2FWVqGbwZrkJ0w%3D%3DD