💾 Archived View for alaskalinuxuser.ddns.net › 2022-10-27.gmi captured on 2024-09-29 at 00:20:49. Gemini links have been rewritten to link to archived content
-=-=-=-=-=-=-
">\n
">
76w, https://alaskalinuxuser3.ddns.net/wp-content/uploads/2022/10/photo_2022-
10-13_12-34-09-169x300.jpg 169w, https://alaskalinuxuser3.ddns.net/wp-content/
uploads/2022/10/photo_2022-10-13_12-34-09.jpg 720w" sizes="(max-width: 576px)
100vw, 576px" />
">
76w, https://alaskalinuxuser3.ddns.net/wp-content/uploads/2022/10/photo_2022-
10-13_12-34-05-169x300.jpg 169w, https://alaskalinuxuser3.ddns.net/wp-content/
uploads/2022/10/photo_2022-10-13_12-34-05.jpg 720w" sizes="(max-width: 576px)
100vw, 576px" />
">
76w, https://alaskalinuxuser3.ddns.net/wp-content/uploads/2022/10/photo_2022-
10-13_12-34-02-169x300.jpg 169w, https://alaskalinuxuser3.ddns.net/wp-content/
uploads/2022/10/photo_2022-10-13_12-34-02.jpg 720w" sizes="(max-width: 576px)
100vw, 576px" />
">
76w, https://alaskalinuxuser3.ddns.net/wp-content/uploads/2022/10/photo_2022-
10-13_12-33-58-169x300.jpg 169w, https://alaskalinuxuser3.ddns.net/wp-content/
uploads/2022/10/photo_2022-10-13_12-33-58.jpg 720w" sizes="(max-width: 576px)
100vw, 576px" />
">
024w, https://alaskalinuxuser3.ddns.net/wp-content/uploads/2022/10/photo_2022-
10-13_12-33-52-300x169.jpg 300w, https://alaskalinuxuser3.ddns.net/wp-content/
uploads/2022/10/photo_2022-10-13_12-33-52-768x432.jpg 768w, https://
alaskalinuxuser3.ddns.net/wp-content/uploads/2022/10/photo_2022-10-13_12-33-
52.jpg 1280w" sizes="(max-width: 1024px) 100vw, 1024px" />
">
76w, https://alaskalinuxuser3.ddns.net/wp-content/uploads/2022/10/photo_2022-
10-06_09-44-48-169x300.jpg 169w, https://alaskalinuxuser3.ddns.net/wp-content/
uploads/2022/10/photo_2022-10-06_09-44-48.jpg 720w" sizes="(max-width: 576px)
100vw, 576px" />
">
76w, https://alaskalinuxuser3.ddns.net/wp-content/uploads/2022/10/photo_2022-
10-06_09-44-45-169x300.jpg 169w, https://alaskalinuxuser3.ddns.net/wp-content/
uploads/2022/10/photo_2022-10-06_09-44-45.jpg 720w" sizes="(max-width: 576px)
100vw, 576px" />
\n
Recently, I decided that I would put some of these great components that I have
lying around to work. I’ve been doing a lot of Winlink lately, and messing
around with my dilapidated Baofeng UV5R. So, I decided to intertwine the two
projects. I decided to build an Arduino TNC.
First, for the uninformed, a TNC is a Terminal Node Controller. Essentially, it
is a modem. It allows you to send data in the form of packets by making sounds
over analog radio signals. Usually the sounds that a TNC makes are FSK, or
frequency Shift Keying, or will make a certain sound for say, a 0, and another
sound for say, a 1. These 1’s and 0’s then become the building blocks of
digital information sent as bits. Some versions and variations can use 8 or
more different sounds to create a better throughput of data.
Second, what do you use a TNC for? Well, as we think of it as a modem, consider
the old school dial up internet. That is what you can use a TNC for, but with
your radio. It allows a radio to connect to another radio or network of radios
and pass digital traffic like emails, text messages, BBS, or even traditional
internet as we know it today. Usually, the speeds are limited by the FCC, so it
is not as fast as traditional home internet, but can work just as well, but
slower.
The reason I decided to build the TNC was so that I could use my Android phone
with a Winlink app to hook up to my handheld radio to pass email traffic. This
would allow me to go anywhere and send/receive emails as long as my hand held
Baofeng was within range of a gateway, a computer/radio connection set up as a
server for radio users to call in, like your old internet service provider
whose phone number you “called” with your dial up modem.
I am not smart enough to build a TNC from scratch. Or at least, I would need to
study for a few years to fully understand what I need it to do and how to do
it, so I could design one. Thus, I decided to build this already designed TNC:
http://www.mobilinkd.com/2014/09/11/arduino-kiss-tnc/
It is a really nice article, and spelled out with drawings, schematics, and
instructions for the build. However, I didn’t have all of the parts. I had lots
of other parts. I didn’t want to wait for shipping. So, I experimented and made
some changes. I used a Adafruit_Power_Relay_Featherwinginstead of the
transistor to key the microphone.
So, instead of sending the Arduino D10 output to the transistor to switch on
and off the microphone, I sent it to the signal input pin of the Featherwing
power relay board. I then hooked the ground pin of the Featherwing to the
Arduino ground pin. This completes the circuit allowing the D10 signal to turn
on or off the relay.
Originally, the transistor allowed a path from the push to talk pin of the
Baofeng plug to be grounded, when the D10 signal was sent. So, on the relay, I
connected the input to the Baofeng push to talk plug, and the output to ground.
So, when the D10 signal is sent, the relay keys, and the Baofeng push to talk
plug wire gets a path to ground, keying the microphone on the handset.
Overall pretty simple. This does cause me a slight software setup issue later,
but it was easily overcome, as I will explain in the next post where I talk
about the software setup. If you can see the pictures, you can also see that I
used an “Experimenter 300” board to make temporary connections until I was
satisfied with the setup. Then I soldered all the wires together.
Next up, I needed a case, so I jumped on Printables, and downloaded a 3d
printable case. I did edit the length, but other than that, I made no changes
to the original design, and I printed it. You can find the original design
here:
https://www.printables.com/model/114765-custom-pcb-enclosure
After printing, I spent a few minutes looking around for little screws, and
shoved everything into the enclosure. Then I realized I needed holes for the
wires going to the radio and the phone, so took everything out and drilled two
holes.
All told, this was a pretty fun project! Next up I’ll talk about the software
and setup of the TNC and phone.
Linux – keep it simple.