💾 Archived View for alaskalinuxuser.ddns.net › 2021-10-28.gmi captured on 2024-09-29 at 00:17:40. Gemini links have been rewritten to link to archived content
-=-=-=-=-=-=-
">
024w, https://alaskalinuxuser3.ddns.net/wp-content/uploads/2021/08/wsjtx2_4-
300x169.png 300w, https://alaskalinuxuser3.ddns.net/wp-content/uploads/2021/08/
wsjtx2_4-768x432.png 768w, https://alaskalinuxuser3.ddns.net/wp-content/
uploads/2021/08/wsjtx2_4.png 1366w" sizes="(max-width: 1024px) 100vw,
1024px" />
While I don’t think this is my favorite way to pass the time, I’ve been
enjoying trying out different digital modes, including FT8. I’ve posted about
it before, when I was just listening in, now that I’ve got a general class
license, I’ve been responding and making a few contacts (QSO’s).
One main thing I found with digital modes is that you have to make sure you are
using the latest and greatest version of the program. I talked about this a bit
before, so I wont go over all the details again, but keep in mind that your
Linux distribution’s repository probably doesn’t have the latest version of the
program you want to use. This makes sense, since the distribution is looking
for stability, not leading edge in most cases.
That said, FT-8 is a bit boring to “do”, but the results of seeing how far you
can transmit are pretty interesting. Of course that will change based on the
time of day, the solar activity, etc., but it is still a cool way to figure out
where your antenna can “reach”. As for me, the furthest I’ve gotten was South
Korea, which is about 3700 miles or 5900 kilometers. Not a record by any means,
but not bad for a hobbyist!
Editors Note: Since writing this post, my to date record was 7810 miles with
JS8Call.
From my understanding, the mode works by setting your radio to the frequency
required, such as 14.074 MHz. Then, within that frequency (upper side band) you
have a 3000 Hz window of sound. Using the program, you select a 50 Hz segment
of that sound band and transmit your digital signal. The digital signal is
comprised by dividing that 50 Hz band into 8 notes of 6.5 Hz each with your
sound card producing the “notes”. So when you transmit, your program and sound
card “play” your little “song” to make the digital data available to other
listeners.
Within the program, you click on these “blocks” of little 50 Hz notes/data, and
your readout prints what they say, which the program can read and respond to.
Since your sound card hears all the sound at once, you can actually see all
traffic at the same time as “band activity” and the selected portion becomes
“RX frequency” (received activity).
The only downside I see to FT8 is that it is limited to 13 characters. That’s
not a lot of information. However, over a 90 second period, you can call CQ,
get a response, trade signal strengths and location, and then have time for a
good old fashioned 73 (Best regards)! But not much by way of actually talking
with other people. I think God intends for us to actually communicate with
others, not just “connect” digitally.
Hats off to the guys that made this, it is a really cool mode for sending very
weak signals very far.
Linux – keep it simple.