šŸ’¾ Archived View for gmi.noulin.net ā€ŗ man ā€ŗ man7 ā€ŗ user_namespaces.7.gmi captured on 2024-08-31 at 14:26:20. Gemini links have been rewritten to link to archived content

View Raw

More Information

ā¬…ļø Previous capture (2022-06-12)

-=-=-=-=-=-=-

USER_NAMESPACES(7)                                                      Linux Programmer's Manual                                                     USER_NAMESPACES(7)

NAME
       user_namespaces - overview of Linux user namespaces

DESCRIPTION
       For an overview of namespaces, see namespaces(7).

       User  namespaces  isolate  security-related identifiers and attributes, in particular, user IDs and group IDs (see credentials(7)), the root directory, keys (see
       keyrings(7)), and capabilities (see capabilities(7)).  A process's user and group IDs can be different inside and outside a user  namespace.   In  particular,  a
       process  can  have  a normal unprivileged user ID outside a user namespace while at the same time having a user ID of 0 inside the namespace; in other words, the
       process has full privileges for operations inside the user namespace, but is unprivileged for operations outside the namespace.

   Nested namespaces, namespace membership
       User namespaces can be nested; that is, each user namespaceā€”except the initial ("root") namespaceā€”has a parent user namespace, and can have zero  or  more  child
       user  namespaces.   The  parent user namespace is the user namespace of the process that creates the user namespace via a call to unshare(2) or clone(2) with the
       CLONE_NEWUSER flag.

       The kernel imposes (since version 3.11) a limit of 32 nested levels of user namespaces.  Calls to unshare(2) or clone(2) that would cause this limit  to  be  exā€
       ceeded fail with the error EUSERS.

       Each  process  is  a member of exactly one user namespace.  A process created via fork(2) or clone(2) without the CLONE_NEWUSER flag is a member of the same user
       namespace as its parent.  A single-threaded process can join another user namespace with setns(2) if it has the CAP_SYS_ADMIN in that namespace; upon  doing  so,
       it gains a full set of capabilities in that namespace.

       A  call  to clone(2) or unshare(2) with the CLONE_NEWUSER flag makes the new child process (for clone(2)) or the caller (for unshare(2)) a member of the new user
       namespace created by the call.

       The NS_GET_PARENT ioctl(2) operation can be used to discover the parental relationship between user namespaces; see ioctl_ns(2).

   Capabilities
       The child process created by clone(2) with the CLONE_NEWUSER flag starts out with a complete set of capabilities in the new user namespace.  Likewise, a  process
       that creates a new user namespace using unshare(2) or joins an existing user namespace using setns(2) gains a full set of capabilities in that namespace.  On the
       other hand, that process has no capabilities in the parent (in the case of clone(2)) or previous (in the case of unshare(2) and setns(2)) user namespace, even if
       the new namespace is created or joined by the root user (i.e., a process with user ID 0 in the root namespace).

       Note  that  a  call to execve(2) will cause a process's capabilities to be recalculated in the usual way (see capabilities(7)).  Consequently, unless the process
       has a user ID of 0 within the namespace, or the executable file has a nonempty inheritable capabilities mask, the process will lose all  capabilities.   See  the
       discussion of user and group ID mappings, below.

       A call to clone(2) or unshare(2) using the CLONE_NEWUSER flag or a call to setns(2) that moves the caller into another user namespace sets the "securebits" flags
       (see capabilities(7)) to their default values (all flags disabled) in the child (for clone(2)) or caller (for unshare(2) or setns(2)).   Note  that  because  the
       caller no longer has capabilities in its original user namespace after a call to setns(2), it is not possible for a process to reset its "securebits" flags while
       retaining its user namespace membership by using a pair of setns(2) calls to move to another user namespace and then return to its original user namespace.

       The rules for determining whether or not a process has a capability in a particular user namespace are as follows:

       1. A process has a capability inside a user namespace if it is a member of that namespace and it has the capability in its effective capability set.   A  process
          can  gain  capabilities  in  its effective capability set in various ways.  For example, it may execute a set-user-ID program or an executable with associated
          file capabilities.  In addition, a process may gain capabilities via the effect of clone(2), unshare(2), or setns(2), as already described.

       2. If a process has a capability in a user namespace, then it has that capability in all child (and further removed descendant) namespaces as well.

       3. When a user namespace is created, the kernel records the effective user ID of the creating process as being the "owner" of the namespace.  A process that  reā€
          sides  in the parent of the user namespace and whose effective user ID matches the owner of the namespace has all capabilities in the namespace.  By virtue of
          the previous rule, this means that the process has all capabilities in all further removed descendant user namespaces as well.  The NS_GET_OWNER_UID  ioctl(2)
          operation can be used to discover the user ID of the owner of the namespace; see ioctl_ns(2).

   Effect of capabilities within a user namespace
       Having  a  capability  inside a user namespace permits a process to perform operations (that require privilege) only on resources governed by that namespace.  In
       other words, having a capability in a user namespace permits a process to perform privileged operations on resources that are governed  by  (nonuser)  namespaces
       owned by (associated with) the user namespace (see the next subsection).

       On  the  other hand, there are many privileged operations that affect resources that are not associated with any namespace type, for example, changing the system
       (i.e., calendar) time (governed by CAP_SYS_TIME), loading a kernel module (governed by CAP_SYS_MODULE), and creating a device (governed by  CAP_MKNOD).   Only  a
       process with privileges in the initial user namespace can perform such operations.

       Holding  CAP_SYS_ADMIN within the user namespace that owns a process's mount namespace allows that process to create bind mounts and mount the following types of
       filesystems:

           * /proc (since Linux 3.8)
           * /sys (since Linux 3.8)
           * devpts (since Linux 3.9)
           * tmpfs(5) (since Linux 3.9)
           * ramfs (since Linux 3.9)
           * mqueue (since Linux 3.9)
           * bpf (since Linux 4.4)
           * overlayfs (since Linux 5.11)

       Holding CAP_SYS_ADMIN within the user namespace that owns a process's cgroup namespace allows (since Linux 4.6) that process to the mount the  cgroup  version  2
       filesystem and cgroup version 1 named hierarchies (i.e., cgroup filesystems mounted with the "none,name=" option).

       Holding CAP_SYS_ADMIN within the user namespace that owns a process's PID namespace allows (since Linux 3.8) that process to mount /proc filesystems.

       Note, however, that mounting block-based filesystems can be done only by a process that holds CAP_SYS_ADMIN in the initial user namespace.

   Interaction of user namespaces and other types of namespaces
       Starting in Linux 3.8, unprivileged processes can create user namespaces, and the other types of namespaces can be created with just the CAP_SYS_ADMIN capability
       in the caller's user namespace.

       When a nonuser namespace is created, it is owned by the user namespace in which the creating process was a member at the time of the creation of  the  namespace.
       Privileged  operations on resources governed by the nonuser namespace require that the process has the necessary capabilities in the user namespace that owns the
       nonuser namespace.

       If CLONE_NEWUSER is specified along with other CLONE_NEW* flags in a single clone(2) or unshare(2) call, the user namespace is guaranteed to  be  created  first,
       giving the child (clone(2)) or caller (unshare(2)) privileges over the remaining namespaces created by the call.  Thus, it is possible for an unprivileged caller
       to specify this combination of flags.

       When a new namespace (other than a user namespace) is created via clone(2) or unshare(2), the kernel records the user namespace of the creating  process  as  the
       owner  of  the new namespace.  (This association can't be changed.)  When a process in the new namespace subsequently performs privileged operations that operate
       on global resources isolated by the namespace, the permission checks are performed according to the process's capabilities in the user namespace that the  kernel
       associated  with  the  new namespace.  For example, suppose that a process attempts to change the hostname (sethostname(2)), a resource governed by the UTS nameā€
       space.  In this case, the kernel will determine which user namespace owns the process's UTS namespace, and check whether the process has the required  capability
       (CAP_SYS_ADMIN) in that user namespace.

       The NS_GET_USERNS ioctl(2) operation can be used to discover the user namespace that owns a nonuser namespace; see ioctl_ns(2).

   User and group ID mappings: uid_map and gid_map
       When  a  user  namespace  is  created,  it  starts  out  without  a  mapping  of  user IDs (group IDs) to the parent user namespace.  The /proc/[pid]/uid_map and
       /proc/[pid]/gid_map files (available since Linux 3.5) expose the mappings for user and group IDs inside the user namespace for the process pid.  These files  can
       be read to view the mappings in a user namespace and written to (once) to define the mappings.

       The  description  in the following paragraphs explains the details for uid_map; gid_map is exactly the same, but each instance of "user ID" is replaced by "group
       ID".

       The uid_map file exposes the mapping of user IDs from the user namespace of the process pid to the user namespace of the process that opened uid_map (but  see  a
       qualification  to  this  point below).  In other words, processes that are in different user namespaces will potentially see different values when reading from a
       particular uid_map file, depending on the user ID mappings for the user namespaces of the reading processes.

       Each line in the uid_map file specifies a 1-to-1 mapping of a range of contiguous user IDs between two user namespaces.  (When a user namespace is first created,
       this  file  is empty.)  The specification in each line takes the form of three numbers delimited by white space.  The first two numbers specify the starting user
       ID in each of the two user namespaces.  The third number specifies the length of the mapped range.  In detail, the fields are interpreted as follows:

       (1) The start of the range of user IDs in the user namespace of the process pid.

       (2) The start of the range of user IDs to which the user IDs specified by field one map.  How field two is interpreted depends on whether the process that opened
           uid_map and the process pid are in the same user namespace, as follows:

           a) If  the  two  processes  are  in different user namespaces: field two is the start of a range of user IDs in the user namespace of the process that opened
              uid_map.

           b) If the two processes are in the same user namespace: field two is the start of the range of user IDs in the parent user  namespace  of  the  process  pid.
              This case enables the opener of uid_map (the common case here is opening /proc/self/uid_map) to see the mapping of user IDs into the user namespace of the
              process that created this user namespace.

       (3) The length of the range of user IDs that is mapped between the two user namespaces.

       System calls that return user IDs (group IDs)ā€”for example, getuid(2), getgid(2), and the credential fields in the structure returned by stat(2)ā€”return  the  user
       ID (group ID) mapped into the caller's user namespace.

       When  a  process accesses a file, its user and group IDs are mapped into the initial user namespace for the purpose of permission checking and assigning IDs when
       creating a file.  When a process retrieves file user and group IDs via stat(2), the IDs are mapped in the opposite direction, to produce values relative  to  the
       process user and group ID mappings.

       The  initial user namespace has no parent namespace, but, for consistency, the kernel provides dummy user and group ID mapping files for this namespace.  Looking
       at the uid_map file (gid_map is the same) from a shell in the initial namespace shows:

           $ cat /proc/$/uid_map
                    0          0 4294967295

       This mapping tells us that the range starting at user ID 0 in this namespace maps to a range starting at 0 in the (nonexistent) parent namespace, and the  length
       of  the  range  is the largest 32-bit unsigned integer.  This leaves 4294967295 (the 32-bit signed -1 value) unmapped.  This is deliberate: (uid_t) -1 is used in
       several interfaces (e.g., setreuid(2)) as a way to specify "no user ID".  Leaving (uid_t) -1 unmapped and unusable guarantees that there  will  be  no  confusion
       when using these interfaces.

   Defining user and group ID mappings: writing to uid_map and gid_map
       After the creation of a new user namespace, the uid_map file of one of the processes in the namespace may be written to once to define the mapping of user IDs in
       the new user namespace.  An attempt to write more than once to a uid_map file in a user namespace fails with the error EPERM.  Similar rules  apply  for  gid_map
       files.

       The lines written to uid_map (gid_map) must conform to the following validity rules:

       *  The three fields must be valid numbers, and the last field must be greater than 0.

       *  Lines are terminated by newline characters.

       *  There  is a limit on the number of lines in the file.  In Linux 4.14 and earlier, this limit was (arbitrarily) set at 5 lines.  Since Linux 4.15, the limit is
          340 lines.  In addition, the number of bytes written to the file must be less than the system page size, and the write must be performed at the start  of  the
          file (i.e., lseek(2) and pwrite(2) can't be used to write to nonzero offsets in the file).

       *  The  range  of user IDs (group IDs) specified in each line cannot overlap with the ranges in any other lines.  In the initial implementation (Linux 3.8), this
          requirement was satisfied by a simplistic implementation that imposed the further requirement that the values in both field 1 and field 2 of successive  lines
          must  be  in  ascending  numerical order, which prevented some otherwise valid maps from being created.  Linux 3.9 and later fix this limitation, allowing any
          valid set of nonoverlapping maps.

       *  At least one line must be written to the file.

       Writes that violate the above rules fail with the error EINVAL.

       In order for a process to write to the /proc/[pid]/uid_map (/proc/[pid]/gid_map) file, all of the following permission requirements must be met:

       1. The writing process must have the CAP_SETUID (CAP_SETGID) capability in the user namespace of the process pid.

       2. The writing process must either be in the user namespace of the process pid or be in the parent user namespace of the process pid.

       3. The mapped user IDs (group IDs) must in turn have a mapping in the parent user namespace.

       4. If updating /proc/[pid]/uid_map to create a mapping that maps UID 0 in the parent namespace, then one of the following must be true:

          *  if writing process is in the parent user namespace, then it must have the CAP_SETFCAP capability in that user namespace; or

          *  if the writing process is in the child user namespace, then the process that created the user namespace must have had the CAP_SETFCAP capability  when  the
             namespace was created.

          This  rule  has been in place since Linux 5.12.  It eliminates an earlier security bug whereby a UID 0 process that lacks the CAP_SETFCAP capability, which is
          needed to create a binary with namespaced file capabilities (as described in capabilities(7)), could nevertheless create  such  a  binary,  by  the  following
          steps:

          *  Create  a new user namespace with the identity mapping (i.e., UID 0 in the new user namespace maps to UID 0 in the parent namespace), so that UID 0 in both
             namespaces is equivalent to the same root user ID.

          *  Since the child process has the CAP_SETFCAP capability, it could create a binary with namespaced file capabilities that would then be effective in the parā€
             ent user namespace (because the root user IDs are the same in the two namespaces).

       5. One of the following two cases applies:

          *  Either the writing process has the CAP_SETUID (CAP_SETGID) capability in the parent user namespace.

             +  No further restrictions apply: the process can make mappings to arbitrary user IDs (group IDs) in the parent user namespace.

          *  Or otherwise all of the following restrictions apply:

             +  The  data  written  to  uid_map  (gid_map) must consist of a single line that maps the writing process's effective user ID (group ID) in the parent user
                namespace to a user ID (group ID) in the user namespace.

             +  The writing process must have the same effective user ID as the process that created the user namespace.

             +  In the case of gid_map, use of the setgroups(2) system call must first be denied by writing "deny" to the /proc/[pid]/setgroups file (see below)  before
                writing to gid_map.

       Writes that violate the above rules fail with the error EPERM.

   Project ID mappings: projid_map
       Similarly  to  user  and  group  ID  mappings,  it  is  possible  to create project ID mappings for a user namespace.  (Project IDs are used for disk quotas; see
       setquota(8) and quotactl(2).)

       Project ID mappings are defined by writing to the /proc/[pid]/projid_map file (present since Linux 3.7).

       The validity rules for writing to the /proc/[pid]/projid_map file are as for writing to the uid_map file; violation of these rules causes write(2) to  fail  with
       the error EINVAL.

       The permission rules for writing to the /proc/[pid]/projid_map file are as follows:

       1. The writing process must either be in the user namespace of the process pid or be in the parent user namespace of the process pid.

       2. The mapped project IDs must in turn have a mapping in the parent user namespace.

       Violation of these rules causes write(2) to fail with the error EPERM.

   Interaction with system calls that change process UIDs or GIDs
       In  a  user  namespace where the uid_map file has not been written, the system calls that change user IDs will fail.  Similarly, if the gid_map file has not been
       written, the system calls that change group IDs will fail.  After the uid_map and gid_map files have been written, only the mapped values may be used  in  system
       calls that change user and group IDs.

       For  user  IDs,  the  relevant system calls include setuid(2), setfsuid(2), setreuid(2), and setresuid(2).  For group IDs, the relevant system calls include setā€
       gid(2), setfsgid(2), setregid(2), setresgid(2), and setgroups(2).

       Writing "deny" to the /proc/[pid]/setgroups file before writing to /proc/[pid]/gid_map will permanently disable setgroups(2) in a user namespace and allow  writā€
       ing to /proc/[pid]/gid_map without having the CAP_SETGID capability in the parent user namespace.

   The /proc/[pid]/setgroups file
       The  /proc/[pid]/setgroups  file  displays  the  string "allow" if processes in the user namespace that contains the process pid are permitted to employ the setā€
       groups(2) system call; it displays "deny" if setgroups(2) is not permitted in that user namespace.  Note that regardless of the  value  in  the  /proc/[pid]/setā€
       groups file (and regardless of the process's capabilities), calls to setgroups(2) are also not permitted if /proc/[pid]/gid_map has not yet been set.

       A  privileged  process  (one  with the CAP_SYS_ADMIN capability in the namespace) may write either of the strings "allow" or "deny" to this file before writing a
       group ID mapping for this user namespace to the file /proc/[pid]/gid_map.  Writing the string "deny" prevents any process in the user  namespace  from  employing
       setgroups(2).

       The  essence  of  the  restrictions  described  in the preceding paragraph is that it is permitted to write to /proc/[pid]/setgroups only so long as calling setā€
       groups(2) is disallowed because /proc/[pid]/gid_map has not been set.  This ensures that a process cannot transition from a state where setgroups(2)  is  allowed
       to a state where setgroups(2) is denied; a process can transition only from setgroups(2) being disallowed to setgroups(2) being allowed.

       The default value of this file in the initial user namespace is "allow".

       Once  /proc/[pid]/gid_map  has  been  written to (which has the effect of enabling setgroups(2) in the user namespace), it is no longer possible to disallow setā€
       groups(2) by writing "deny" to /proc/[pid]/setgroups (the write fails with the error EPERM).

       A child user namespace inherits the /proc/[pid]/setgroups setting from its parent.

       If the setgroups file has the value "deny", then the setgroups(2) system call can't subsequently be reenabled (by writing "allow" to the file) in this user nameā€
       space.  (Attempts to do so fail with the error EPERM.)  This restriction also propagates down to all child user namespaces of this user namespace.

       The  /proc/[pid]/setgroups file was added in Linux 3.19, but was backported to many earlier stable kernel series, because it addresses a security issue.  The isā€
       sue concerned files with permissions such as "rwx---rwx".  Such files give fewer permissions to "group" than they do to "other".  This means that dropping groups
       using setgroups(2) might allow a process file access that it did not formerly have.  Before the existence of user namespaces this was not a concern, since only a
       privileged process (one with the CAP_SETGID capability) could call setgroups(2).  However, with the introduction of user namespaces, it became  possible  for  an
       unprivileged  process to create a new namespace in which the user had all privileges.  This then allowed formerly unprivileged users to drop groups and thus gain
       file access that they did not previously have.  The /proc/[pid]/setgroups file was added to address this security issue, by denying any pathway for  an  unpriviā€
       leged process to drop groups with setgroups(2).

   Unmapped user and group IDs
       There  are various places where an unmapped user ID (group ID) may be exposed to user space.  For example, the first process in a new user namespace may call geā€
       tuid(2) before a user ID mapping has been defined for the namespace.  In most such cases, an unmapped user ID is converted to the overflow user  ID  (group  ID);
       the  default  value  for  the  overflow  user  ID  (group ID) is 65534.  See the descriptions of /proc/sys/kernel/overflowuid and /proc/sys/kernel/overflowgid in
       proc(5).

       The cases where unmapped IDs are mapped in this fashion include system calls that return user IDs (getuid(2), getgid(2), and similar), credentials passed over  a
       UNIX domain socket, credentials returned by stat(2), waitid(2), and the System V IPC "ctl" IPC_STAT operations, credentials exposed by /proc/[pid]/status and the
       files in /proc/sysvipc/*, credentials returned via the si_uid field in the siginfo_t received with a  signal  (see  sigaction(2)),  credentials  written  to  the
       process accounting file (see acct(5)), and credentials returned with POSIX message queue notifications (see mq_notify(3)).

       There  is one notable case where unmapped user and group IDs are not converted to the corresponding overflow ID value.  When viewing a uid_map or gid_map file in
       which there is no mapping for the second field, that field is displayed as 4294967295 (-1 as an unsigned integer).

   Accessing files
       In order to determine permissions when an unprivileged process accesses a file, the process credentials (UID, GID) and the file credentials are in effect  mapped
       back  to  what  they would be in the initial user namespace and then compared to determine the permissions that the process has on the file.  The same is also of
       other objects that employ the credentials plus permissions mask accessibility model, such as System V IPC objects

   Operation of file-related capabilities
       Certain capabilities allow a process to bypass various kernel-enforced restrictions when performing operations on files owned by other users  or  groups.   These
       capabilities are: CAP_CHOWN, CAP_DAC_OVERRIDE, CAP_DAC_READ_SEARCH, CAP_FOWNER, and CAP_FSETID.

       Within a user namespace, these capabilities allow a process to bypass the rules if the process has the relevant capability over the file, meaning that:

       *  the process has the relevant effective capability in its user namespace; and

       *  the file's user ID and group ID both have valid mappings in the user namespace.

       The  CAP_FOWNER  capability is treated somewhat exceptionally: it allows a process to bypass the corresponding rules so long as at least the file's user ID has a
       mapping in the user namespace (i.e., the file's group ID does not need to have a valid mapping).

   Set-user-ID and set-group-ID programs
       When a process inside a user namespace executes a set-user-ID (set-group-ID) program, the process's effective user (group) ID inside the namespace is changed  to
       whatever  value  is mapped for the user (group) ID of the file.  However, if either the user or the group ID of the file has no mapping inside the namespace, the
       set-user-ID (set-group-ID) bit is silently ignored: the new program is executed, but the process's effective user (group) ID is left  unchanged.   (This  mirrors
       the  semantics  of  executing  a  set-user-ID  or  set-group-ID  program  that  resides on a filesystem that was mounted with the MS_NOSUID flag, as described in
       mount(2).)

   Miscellaneous
       When a process's user and group IDs are passed over a UNIX domain socket to a process in a different user namespace (see the description  of  SCM_CREDENTIALS  in
       unix(7)), they are translated into the corresponding values as per the receiving process's user and group ID mappings.

CONFORMING TO
       Namespaces are a Linux-specific feature.

NOTES
       Over  the  years,  there  have  been a lot of features that have been added to the Linux kernel that have been made available only to privileged users because of
       their potential to confuse set-user-ID-root applications.  In general, it becomes safe to allow the root user in a user namespace to use those  features  because
       it is impossible, while in a user namespace, to gain more privilege than the root user of a user namespace has.

   Global root
       The term "global root" is sometimes used as a shorthand for user ID 0 in the initial user namespace.

   Availability
       Use  of user namespaces requires a kernel that is configured with the CONFIG_USER_NS option.  User namespaces require support in a range of subsystems across the
       kernel.  When an unsupported subsystem is configured into the kernel, it is not possible to configure user namespaces support.

       As at Linux 3.8, most relevant subsystems supported user namespaces, but a number of filesystems did not have the infrastructure needed to map user and group IDs
       between  user namespaces.  Linux 3.9 added the required infrastructure support for many of the remaining unsupported filesystems (Plan 9 (9P), Andrew File System
       (AFS), Ceph, CIFS, CODA, NFS, and OCFS2).  Linux 3.12 added support for the last of the unsupported major filesystems, XFS.

EXAMPLES
       The program below is designed to allow experimenting with user namespaces, as well as other types of namespaces.  It creates namespaces as specified by  command-
       line  options  and  then executes a command inside those namespaces.  The comments and usage() function inside the program provide a full explanation of the proā€
       gram.  The following shell session demonstrates its use.

       First, we look at the run-time environment:

           $ uname -rs     # Need Linux 3.8 or later
           Linux 3.8.0
           $ id -u         # Running as unprivileged user
           1000
           $ id -g
           1000

       Now start a new shell in new user (-U), mount (-m), and PID (-p) namespaces, with user ID (-M) and group ID (-G) 1000 mapped to 0 inside the user namespace:

           $ ./userns_child_exec -p -m -U -M '0 1000 1' -G '0 1000 1' bash

       The shell has PID 1, because it is the first process in the new PID namespace:

           bash$ echo $
           1

       Mounting a new /proc filesystem and listing all of the processes visible in the new PID namespace shows that the shell can't see any processes  outside  the  PID
       namespace:

           bash$ mount -t proc proc /proc
           bash$ ps ax
             PID TTY      STAT   TIME COMMAND
               1 pts/3    S      0:00 bash
              22 pts/3    R+     0:00 ps ax

       Inside the user namespace, the shell has user and group ID 0, and a full set of permitted and effective capabilities:

           bash$ cat /proc/$/status | egrep '^[UG]id'
           Uid: 0    0    0    0
           Gid: 0    0    0    0
           bash$ cat /proc/$/status | egrep '^Cap(Prm|Inh|Eff)'
           CapInh:   0000000000000000
           CapPrm:   0000001fffffffff
           CapEff:   0000001fffffffff

   Program source

       /* userns_child_exec.c

          Licensed under GNU General Public License v2 or later

          Create a child process that executes a shell command in new
          namespace(s); allow UID and GID mappings to be specified when
          creating a user namespace.
       */
       #define _GNU_SOURCE
       #include <sched.h>
       #include <unistd.h>
       #include <stdint.h>
       #include <stdlib.h>
       #include <sys/wait.h>
       #include <signal.h>
       #include <fcntl.h>
       #include <stdio.h>
       #include <string.h>
       #include <limits.h>
       #include <errno.h>

       /* A simple error-handling function: print an error message based
          on the value in 'errno' and terminate the calling process. */

       #define errExit(msg)    do { perror(msg); exit(EXIT_FAILURE); \
                               } while (0)

       struct child_args {
           char **argv;        /* Command to be executed by child, with args */
           int    pipe_fd[2];  /* Pipe used to synchronize parent and child */
       };

       static int verbose;

       static void
       usage(char *pname)
       {
           fprintf(stderr, "Usage: %s [options] cmd [arg...]\n\n", pname);
           fprintf(stderr, "Create a child process that executes a shell "
                   "command in a new user namespace,\n"
                   "and possibly also other new namespace(s).\n\n");
           fprintf(stderr, "Options can be:\n\n");
       #define fpe(str) fprintf(stderr, "    %s", str);
           fpe("-i          New IPC namespace\n");
           fpe("-m          New mount namespace\n");
           fpe("-n          New network namespace\n");
           fpe("-p          New PID namespace\n");
           fpe("-u          New UTS namespace\n");
           fpe("-U          New user namespace\n");
           fpe("-M uid_map  Specify UID map for user namespace\n");
           fpe("-G gid_map  Specify GID map for user namespace\n");
           fpe("-z          Map user's UID and GID to 0 in user namespace\n");
           fpe("            (equivalent to: -M '0 <uid> 1' -G '0 <gid> 1')\n");
           fpe("-v          Display verbose messages\n");
           fpe("\n");
           fpe("If -z, -M, or -G is specified, -U is required.\n");
           fpe("It is not permitted to specify both -z and either -M or -G.\n");
           fpe("\n");
           fpe("Map strings for -M and -G consist of records of the form:\n");
           fpe("\n");
           fpe("    ID-inside-ns   ID-outside-ns   len\n");
           fpe("\n");
           fpe("A map string can contain multiple records, separated"
               " by commas;\n");
           fpe("the commas are replaced by newlines before writing"
               " to map files.\n");

           exit(EXIT_FAILURE);
       }

       /* Update the mapping file 'map_file', with the value provided in
          'mapping', a string that defines a UID or GID mapping. A UID or
          GID mapping consists of one or more newline-delimited records
          of the form:

              ID_inside-ns    ID-outside-ns   length

          Requiring the user to supply a string that contains newlines is
          of course inconvenient for command-line use. Thus, we permit the
          use of commas to delimit records in this string, and replace them
          with newlines before writing the string to the file. */

       static void
       update_map(char *mapping, char *map_file)
       {
           int fd;
           size_t map_len;     /* Length of 'mapping' */

           /* Replace commas in mapping string with newlines. */

           map_len = strlen(mapping);
           for (int j = 0; j < map_len; j++)
               if (mapping[j] == ',')
                   mapping[j] = '\n';

           fd = open(map_file, O_RDWR);
           if (fd == -1) {
               fprintf(stderr, "ERROR: open %s: %s\n", map_file,
                       strerror(errno));
               exit(EXIT_FAILURE);
           }

           if (write(fd, mapping, map_len) != map_len) {
               fprintf(stderr, "ERROR: write %s: %s\n", map_file,
                       strerror(errno));
               exit(EXIT_FAILURE);
           }

           close(fd);
       }

       /* Linux 3.19 made a change in the handling of setgroups(2) and the
          'gid_map' file to address a security issue. The issue allowed
          *unprivileged* users to employ user namespaces in order to drop
          The upshot of the 3.19 changes is that in order to update the
          'gid_maps' file, use of the setgroups() system call in this
          user namespace must first be disabled by writing "deny" to one of
          the /proc/PID/setgroups files for this namespace.  That is the
          purpose of the following function. */

       static void
       proc_setgroups_write(pid_t child_pid, char *str)
       {
           char setgroups_path[PATH_MAX];
           int fd;

           snprintf(setgroups_path, PATH_MAX, "/proc/%jd/setgroups",
                   (intmax_t) child_pid);

           fd = open(setgroups_path, O_RDWR);
           if (fd == -1) {

               /* We may be on a system that doesn't support
                  /proc/PID/setgroups. In that case, the file won't exist,
                  and the system won't impose the restrictions that Linux 3.19
                  added. That's fine: we don't need to do anything in order
                  to permit 'gid_map' to be updated.

                  However, if the error from open() was something other than
                  the ENOENT error that is expected for that case,  let the
                  user know. */

               if (errno != ENOENT)
                   fprintf(stderr, "ERROR: open %s: %s\n", setgroups_path,
                       strerror(errno));
               return;
           }

           if (write(fd, str, strlen(str)) == -1)
               fprintf(stderr, "ERROR: write %s: %s\n", setgroups_path,
                   strerror(errno));

           close(fd);
       }

       static int              /* Start function for cloned child */
       childFunc(void *arg)
       {
           struct child_args *args = arg;
           char ch;

           /* Wait until the parent has updated the UID and GID mappings.
              See the comment in main(). We wait for end of file on a
              pipe that will be closed by the parent process once it has
              updated the mappings. */

           close(args->pipe_fd[1]);    /* Close our descriptor for the write
                                          end of the pipe so that we see EOF
                                          when parent closes its descriptor. */
           if (read(args->pipe_fd[0], &ch, 1) != 0) {
               fprintf(stderr,
                       "Failure in child: read from pipe returned != 0\n");
               exit(EXIT_FAILURE);
           }

           close(args->pipe_fd[0]);

           /* Execute a shell command. */

           printf("About to exec %s\n", args->argv[0]);
           execvp(args->argv[0], args->argv);
           errExit("execvp");
       }

       #define STACK_SIZE (1024 * 1024)

       static char child_stack[STACK_SIZE];    /* Space for child's stack */

       int
       main(int argc, char *argv[])
       {
           int flags, opt, map_zero;
           pid_t child_pid;
           struct child_args args;
           char *uid_map, *gid_map;
           const int MAP_BUF_SIZE = 100;
           char map_buf[MAP_BUF_SIZE];
           char map_path[PATH_MAX];

           /* Parse command-line options. The initial '+' character in
              the final getopt() argument prevents GNU-style permutation
              of command-line options. That's useful, since sometimes
              the 'command' to be executed by this program itself
              has command-line options. We don't want getopt() to treat
              those as options to this program. */

           flags = 0;
           verbose = 0;
           gid_map = NULL;
           uid_map = NULL;
           map_zero = 0;
           while ((opt = getopt(argc, argv, "+imnpuUM:G:zv")) != -1) {
               switch (opt) {
               case 'i': flags |= CLONE_NEWIPC;        break;
               case 'm': flags |= CLONE_NEWNS;         break;
               case 'n': flags |= CLONE_NEWNET;        break;
               case 'p': flags |= CLONE_NEWPID;        break;
               case 'u': flags |= CLONE_NEWUTS;        break;
               case 'v': verbose = 1;                  break;
               case 'z': map_zero = 1;                 break;
               case 'M': uid_map = optarg;             break;
               case 'G': gid_map = optarg;             break;
               case 'U': flags |= CLONE_NEWUSER;       break;
               default:  usage(argv[0]);
               }
           }

           /* -M or -G without -U is nonsensical */

           if (((uid_map != NULL || gid_map != NULL || map_zero) &&
                       !(flags & CLONE_NEWUSER)) ||
                   (map_zero && (uid_map != NULL || gid_map != NULL)))
               usage(argv[0]);

           args.argv = &argv[optind];

           /* We use a pipe to synchronize the parent and child, in order to
              ensure that the parent sets the UID and GID maps before the child
              calls execve(). This ensures that the child maintains its
              capabilities during the execve() in the common case where we
              want to map the child's effective user ID to 0 in the new user
              namespace. Without this synchronization, the child would lose
              its capabilities if it performed an execve() with nonzero
              user IDs (see the capabilities(7) man page for details of the
              transformation of a process's capabilities during execve()). */

           if (pipe(args.pipe_fd) == -1)
               errExit("pipe");

           /* Create the child in new namespace(s). */

           child_pid = clone(childFunc, child_stack + STACK_SIZE,
                             flags | SIGCHLD, &args);
           if (child_pid == -1)
               errExit("clone");

           /* Parent falls through to here. */

           if (verbose)
               printf("%s: PID of child created by clone() is %jd\n",
                       argv[0], (intmax_t) child_pid);

           /* Update the UID and GID maps in the child. */

           if (uid_map != NULL || map_zero) {
               snprintf(map_path, PATH_MAX, "/proc/%jd/uid_map",
                       (intmax_t) child_pid);
               if (map_zero) {
                   snprintf(map_buf, MAP_BUF_SIZE, "0 %jd 1",
                           (intmax_t) getuid());
                   uid_map = map_buf;
               }
               update_map(uid_map, map_path);
           }

           if (gid_map != NULL || map_zero) {
               proc_setgroups_write(child_pid, "deny");

               snprintf(map_path, PATH_MAX, "/proc/%jd/gid_map",
                       (intmax_t) child_pid);
               if (map_zero) {
                   snprintf(map_buf, MAP_BUF_SIZE, "0 %ld 1",
                           (intmax_t) getgid());
                   gid_map = map_buf;
               }
               update_map(gid_map, map_path);
           }

           /* Close the write end of the pipe, to signal to the child that we
              have updated the UID and GID maps. */

           close(args.pipe_fd[1]);

           if (waitpid(child_pid, NULL, 0) == -1)      /* Wait for child */
               errExit("waitpid");

           if (verbose)
               printf("%s: terminating\n", argv[0]);

           exit(EXIT_SUCCESS);
       }

SEE ALSO
       newgidmap(1),  newuidmap(1),  clone(2),  ptrace(2),  setns(2),  unshare(2), proc(5), subgid(5), subuid(5), capabilities(7), cgroup_namespaces(7), credentials(7),
       namespaces(7), pid_namespaces(7)

       The kernel source file Documentation/admin-guide/namespaces/resource-control.rst.

Linux                                                                          2021-08-27                                                             USER_NAMESPACES(7)