đŸ’Ÿ Archived View for gmi.noulin.net â€ș man â€ș man7 â€ș fanotify.7.gmi captured on 2024-08-31 at 14:23:43. Gemini links have been rewritten to link to archived content

View Raw

More Information

âŹ…ïž Previous capture (2022-06-12)

-=-=-=-=-=-=-

FANOTIFY(7)                                                             Linux Programmer's Manual                                                            FANOTIFY(7)

NAME
       fanotify - monitoring filesystem events

DESCRIPTION
       The  fanotify  API  provides  notification  and interception of filesystem events.  Use cases include virus scanning and hierarchical storage management.  In the
       original fanotify API, only a limited set of events was supported.  In particular, there was no support for create, delete, and move  events.   The  support  for
       those events was added in Linux 5.1.  (See inotify(7) for details of an API that did notify those events pre Linux 5.1.)

       Additional capabilities compared to the inotify(7) API include the ability to monitor all of the objects in a mounted filesystem, the ability to make access per‐
       mission decisions, and the possibility to read or modify files before access by other applications.

       The following system calls are used with this API: fanotify_init(2), fanotify_mark(2), read(2), write(2), and close(2).

   fanotify_init(), fanotify_mark(), and notification groups
       The fanotify_init(2) system call creates and initializes an fanotify notification group and returns a file descriptor referring to it.

       An fanotify notification group is a kernel-internal object that holds a list of files, directories, filesystems, and mounts for which events shall be created.

       For each entry in an fanotify notification group, two bit masks exist: the mark mask and the ignore mask.  The mark mask defines file  activities  for  which  an
       event  shall be created.  The ignore mask defines activities for which no event shall be generated.  Having these two types of masks permits a filesystem, mount,
       or directory to be marked for receiving events, while at the same time ignoring events for specific objects under a mount or directory.

       The fanotify_mark(2) system call adds a file, directory, filesystem, or mount to a notification group and specifies which events shall be reported (or  ignored),
       or removes or modifies such an entry.

       A  possible  usage  of  the ignore mask is for a file cache.  Events of interest for a file cache are modification of a file and closing of the same.  Hence, the
       cached directory or mount is to be marked to receive these events.  After receiving the first event informing that a file has been  modified,  the  corresponding
       cache entry will be invalidated.  No further modification events for this file are of interest until the file is closed.  Hence, the modify event can be added to
       the ignore mask.  Upon receiving the close event, the modify event can be removed from the ignore mask and the file cache entry can be updated.

       The entries in the fanotify notification groups refer to files and directories via their inode number and to mounts via their mount ID.  If files or  directories
       are  renamed  or moved within the same mount, the respective entries survive.  If files or directories are deleted or moved to another mount or if filesystems or
       mounts are unmounted, the corresponding entries are deleted.

   The event queue
       As events occur on the filesystem objects monitored by a notification group, the fanotify system generates events that are collected in a  queue.   These  events
       can then be read (using read(2) or similar) from the fanotify file descriptor returned by fanotify_init(2).

       Two  types  of  events are generated: notification events and permission events.  Notification events are merely informative and require no action to be taken by
       the receiving application with one exception: if a valid file descriptor is provided within a generic event, the file  descriptor  must  be  closed.   Permission
       events  are  requests to the receiving application to decide whether permission for a file access shall be granted.  For these events, the recipient must write a
       response which decides whether access is granted or not.

       An event is removed from the event queue of the fanotify group when it has been read.  Permission events that have been read are kept in an internal list of  the
       fanotify group until either a permission decision has been taken by writing to the fanotify file descriptor or the fanotify file descriptor is closed.

   Reading fanotify events
       Calling read(2) for the file descriptor returned by fanotify_init(2) blocks (if the flag FAN_NONBLOCK is not specified in the call to fanotify_init(2)) until ei‐
       ther a file event occurs or the call is interrupted by a signal (see signal(7)).

       The use of one of the flags FAN_REPORT_FID, FAN_REPORT_DIR_FID in fanotify_init(2) influences what data structures are returned to the event  listener  for  each
       event.  Events reported to a group initialized with one of these flags will use file handles to identify filesystem objects instead of file descriptors.

       After a successful read(2), the read buffer contains one or more of the following structures:

           struct fanotify_event_metadata {
               __u32 event_len;
               __u8 vers;
               __u8 reserved;
               __u16 metadata_len;
               __aligned_u64 mask;
               __s32 fd;
               __s32 pid;
           };

       In  case of an fanotify group that identifies filesystem objects by file handles, you should also expect to receive one or more additional information records of
       the structure detailed below following the generic fanotify_event_metadata structure within the read buffer:

           struct fanotify_event_info_header {
               __u8 info_type;
               __u8 pad;
               __u16 len;
           };

           struct fanotify_event_info_fid {
               struct fanotify_event_info_header hdr;
               __kernel_fsid_t fsid;
               unsigned char file_handle[0];
           };

       For performance reasons, it is recommended to use a large buffer size (for example, 4096 bytes), so that multiple events can be retrieved by a single read(2).

       The return value of read(2) is the number of bytes placed in the buffer, or -1 in case of an error (but see BUGS).

       The fields of the fanotify_event_metadata structure are as follows:

       event_len
              This is the length of the data for the current event and the offset to the next event in the buffer.  Unless the group identifies  filesystem  objects  by
              file handles, the value of event_len is always FAN_EVENT_METADATA_LEN.  For a group that identifies filesystem objects by file handles, event_len also in‐
              cludes the variable length file identifier records.

       vers   This field holds a version number for the structure.  It must be compared to FANOTIFY_METADATA_VERSION to verify that the structures returned at run  time
              match the structures defined at compile time.  In case of a mismatch, the application should abandon trying to use the fanotify file descriptor.

       reserved
              This field is not used.

       metadata_len
              This  is  the  length  of  the structure.  The field was introduced to facilitate the implementation of optional headers per event type.  No such optional
              headers exist in the current implementation.

       mask   This is a bit mask describing the event (see below).

       fd     This is an open file descriptor for the object being accessed, or FAN_NOFD if a queue overflow occurred.  With an fanotify group that identifies  filesys‐
              tem objects by file handles, applications should expect this value to be set to FAN_NOFD for each event that is received.  The file descriptor can be used
              to access the contents of the monitored file or directory.  The reading application is responsible for closing this file descriptor.

              When calling fanotify_init(2), the caller may specify (via the event_f_flags argument) various file status flags that are to be set on the open  file  de‐
              scription  that  corresponds to this file descriptor.  In addition, the (kernel-internal) FMODE_NONOTIFY file status flag is set on the open file descrip‐
              tion.  This flag suppresses fanotify event generation.  Hence, when the receiver of the fanotify event accesses the notified file or directory using  this
              file descriptor, no additional events will be created.

       pid    If  flag  FAN_REPORT_TID  was  set  in fanotify_init(2), this is the TID of the thread that caused the event.  Otherwise, this the PID of the process that
              caused the event.

       A program listening to fanotify events can compare this PID to the PID returned by getpid(2), to determine whether the event is caused by the listener itself, or
       is due to a file access by another process.

       The bit mask in mask indicates which events have occurred for a single filesystem object.  Multiple bits may be set in this mask, if more than one event occurred
       for the monitored filesystem object.  In particular, consecutive events for the same filesystem object and originating from the same process may be merged into a
       single event, with the exception that two permission events are never merged into one queue entry.

       The bits that may appear in mask are as follows:

       FAN_ACCESS
              A file or a directory (but see BUGS) was accessed (read).

       FAN_OPEN
              A file or a directory was opened.

       FAN_OPEN_EXEC
              A file was opened with the intent to be executed.  See NOTES in fanotify_mark(2) for additional details.

       FAN_ATTRIB
              A file or directory metadata was changed.

       FAN_CREATE
              A child file or directory was created in a watched parent.

       FAN_DELETE
              A child file or directory was deleted in a watched parent.

       FAN_DELETE_SELF
              A watched file or directory was deleted.

       FAN_MOVED_FROM
              A file or directory has been moved from a watched parent directory.

       FAN_MOVED_TO
              A file or directory has been moved to a watched parent directory.

       FAN_MOVE_SELF
              A watched file or directory was moved.

       FAN_MODIFY
              A file was modified.

       FAN_CLOSE_WRITE
              A file that was opened for writing (O_WRONLY or O_RDWR) was closed.

       FAN_CLOSE_NOWRITE
              A file or directory that was opened read-only (O_RDONLY) was closed.

       FAN_Q_OVERFLOW
              The  event  queue  exceeded  the  limit  of  16384  entries.   This  limit  can be overridden by specifying the FAN_UNLIMITED_QUEUE flag when calling fan‐
              otify_init(2).

       FAN_ACCESS_PERM
              An application wants to read a file or directory, for example using read(2) or readdir(2).  The reader must write a response (as described below) that de‐
              termines whether the permission to access the filesystem object shall be granted.

       FAN_OPEN_PERM
              An  application  wants to open a file or directory.  The reader must write a response that determines whether the permission to open the filesystem object
              shall be granted.

       FAN_OPEN_EXEC_PERM
              An application wants to open a file for execution.  The reader must write a response that determines whether the permission to open the filesystem  object
              for execution shall be granted.  See NOTES in fanotify_mark(2) for additional details.

       To check for any close event, the following bit mask may be used:

       FAN_CLOSE
              A file was closed.  This is a synonym for:

                  FAN_CLOSE_WRITE | FAN_CLOSE_NOWRITE

       To check for any move event, the following bit mask may be used:

       FAN_MOVE
              A file or directory was moved.  This is a synonym for:

                  FAN_MOVED_FROM | FAN_MOVED_TO

       The following bits may appear in mask only in conjunction with other event type bits:

       FAN_ONDIR
              The  events  described in the mask have occurred on a directory object.  Reporting events on directories requires setting this flag in the mark mask.  See
              fanotify_mark(2) for additional details.  The FAN_ONDIR flag is reported in an event mask only if the fanotify group identifies filesystem objects by file
              handles.

       The fields of the fanotify_event_info_fid structure are as follows:

       hdr    This  is  a  structure  of  type  fanotify_event_info_header.  It is a generic header that contains information used to describe an additional information
              record attached to the event.  For example, when an fanotify file descriptor is created using FAN_REPORT_FID, a single information record is  expected  to
              be  attached  to  the  event  with info_type field value of FAN_EVENT_INFO_TYPE_FID.  When an fanotify file descriptor is created using the combination of
              FAN_REPORT_FID  and  FAN_REPORT_DIR_FID,  there  may  be  two  information  records  attached  to  the  event:  one  with   info_type   field   value   of
              FAN_EVENT_INFO_TYPE_DFID,  identifying  a parent directory object, and one with info_type field value of FAN_EVENT_INFO_TYPE_FID, identifying a non-direc‐
              tory object.  The fanotify_event_info_header contains a len field.  The value of len is the size of the additional information record including  the  fan‐
              otify_event_info_header itself.  The total size of all additional information records is not expected to be bigger than ( event_len - metadata_len ).

       fsid   This is a unique identifier of the filesystem containing the object associated with the event.  It is a structure of type __kernel_fsid_t and contains the
              same value as f_fsid when calling statfs(2).

       file_handle
              This is a variable length structure of type struct file_handle.  It is an opaque handle that corresponds to a specified object on a filesystem as returned
              by  name_to_handle_at(2).  It can be used to uniquely identify a file on a filesystem and can be passed as an argument to open_by_handle_at(2).  Note that
              for the directory entry modification events FAN_CREATE, FAN_DELETE, and FAN_MOVE, the file_handle identifies the  modified  directory  and  not  the  cre‐
              ated/deleted/moved  child  object.   If  the  value  of info_type field is FAN_EVENT_INFO_TYPE_DFID_NAME, the file handle is followed by a null terminated
              string that identifies the created/deleted/moved directory entry name.  For other events such as FAN_OPEN, FAN_ATTRIB, FAN_DELETE_SELF, and FAN_MOVE_SELF,
              if  the  value  of  info_type  field is FAN_EVENT_INFO_TYPE_FID, the file_handle identifies the object correlated to the event.  If the value of info_type
              field is FAN_EVENT_INFO_TYPE_DFID, the file_handle identifies the directory object correlated to the event or the parent directory of a non-directory  ob‐
              ject correlated to the event.  If the value of info_type field is FAN_EVENT_INFO_TYPE_DFID_NAME, the file_handle identifies the same directory object that
              would be reported with FAN_EVENT_INFO_TYPE_DFID and the file handle is followed by a null terminated string that identifies the name of a directory  entry
              in that directory, or '.' to identify the directory object itself.

       The following macros are provided to iterate over a buffer containing fanotify event metadata returned by a read(2) from an fanotify file descriptor:

       FAN_EVENT_OK(meta, len)
              This  macro  checks the remaining length len of the buffer meta against the length of the metadata structure and the event_len field of the first metadata
              structure in the buffer.

       FAN_EVENT_NEXT(meta, len)
              This macro uses the length indicated in the event_len field of the metadata structure pointed to by meta to calculate the address  of  the  next  metadata
              structure  that  follows meta.  len is the number of bytes of metadata that currently remain in the buffer.  The macro returns a pointer to the next meta‐
              data structure that follows meta, and reduces len by the number of bytes in the metadata  structure  that  has  been  skipped  over  (i.e.,  it  subtracts
              meta->event_len from len).

       In addition, there is:

       FAN_EVENT_METADATA_LEN
              This  macro  returns  the  size  (in bytes) of the structure fanotify_event_metadata.  This is the minimum size (and currently the only size) of any event
              metadata.

   Monitoring an fanotify file descriptor for events
       When an fanotify event occurs, the fanotify file descriptor indicates as readable when passed to epoll(7), poll(2), or select(2).

   Dealing with permission events
       For permission events, the application must write(2) a structure of the following form to the fanotify file descriptor:

           struct fanotify_response {
               __s32 fd;
               __u32 response;
           };

       The fields of this structure are as follows:

       fd     This is the file descriptor from the structure fanotify_event_metadata.

       response
              This field indicates whether or not the permission is to be granted.  Its value must be either FAN_ALLOW to allow the file operation or FAN_DENY  to  deny
              the file operation.

       If  access  is  denied,  the  requesting application call will receive an EPERM error.  Additionally, if the notification group has been created with the FAN_EN‐
       ABLE_AUDIT flag, then the FAN_AUDIT flag can be set in the response field.  In that case, the audit subsystem will log information about the access  decision  to
       the audit logs.

   Closing the fanotify file descriptor
       When  all  file  descriptors referring to the fanotify notification group are closed, the fanotify group is released and its resources are freed for reuse by the
       kernel.  Upon close(2), outstanding permission events will be set to allowed.

   /proc/[pid]/fdinfo
       The file /proc/[pid]/fdinfo/[fd] contains information about fanotify marks for file descriptor fd of process pid.  See proc(5) for details.

ERRORS
       In addition to the usual errors for read(2), the following errors can occur when reading from the fanotify file descriptor:

       EINVAL The buffer is too small to hold the event.

       EMFILE The per-process limit on the number of open files has been reached.  See the description of RLIMIT_NOFILE in getrlimit(2).

       ENFILE The system-wide limit on the total number of open files has been reached.  See /proc/sys/fs/file-max in proc(5).

       ETXTBSY
              This error is returned by read(2) if O_RDWR or O_WRONLY was specified in the event_f_flags argument when calling fanotify_init(2) and  an  event  occurred
              for a monitored file that is currently being executed.

       In addition to the usual errors for write(2), the following errors can occur when writing to the fanotify file descriptor:

       EINVAL Fanotify access permissions are not enabled in the kernel configuration or the value of response in the response structure is not valid.

       ENOENT The file descriptor fd in the response structure is not valid.  This may occur when a response for the permission event has already been written.

VERSIONS
       The fanotify API was introduced in version 2.6.36 of the Linux kernel and enabled in version 2.6.37.  Fdinfo support was added in version 3.8.

CONFORMING TO
       The fanotify API is Linux-specific.

NOTES
       The  fanotify  API is available only if the kernel was built with the CONFIG_FANOTIFY configuration option enabled.  In addition, fanotify permission handling is
       available only if the CONFIG_FANOTIFY_ACCESS_PERMISSIONS configuration option is enabled.

   Limitations and caveats
       Fanotify reports only events that a user-space program triggers through the filesystem API.  As a result, it does not catch remote events that occur  on  network
       filesystems.

       The fanotify API does not report file accesses and modifications that may occur because of mmap(2), msync(2), and munmap(2).

       Events  for  directories are created only if the directory itself is opened, read, and closed.  Adding, removing, or changing children of a marked directory does
       not create events for the monitored directory itself.

       Fanotify monitoring of directories is not recursive: to monitor subdirectories under a directory, additional marks must be created.  The FAN_CREATE event can  be
       used  for  detecting when a subdirectory has been created under a marked directory.  An additional mark must then be set on the newly created subdirectory.  This
       approach is racy, because it can lose events that occurred inside the newly created subdirectory, before a mark is added on that subdirectory.  Monitoring mounts
       offers  the  capability  to  monitor a whole directory tree in a race-free manner.  Monitoring filesystems offers the capability to monitor changes made from any
       mount of a filesystem instance in a race-free manner.

       The event queue can overflow.  In this case, events are lost.

BUGS
       Before Linux 3.19, fallocate(2) did not generate fanotify events.  Since Linux 3.19, calls to fallocate(2) generate FAN_MODIFY events.

       As of Linux 3.17, the following bugs exist:

       *  On Linux, a filesystem object may be accessible through multiple paths, for example, a part of a filesystem may  be  remounted  using  the  --bind  option  of
          mount(8).   A  listener that marked a mount will be notified only of events that were triggered for a filesystem object using the same mount.  Any other event
          will pass unnoticed.

       *  When an event is generated, no check is made to see whether the user ID of the receiving process has authorization to read or write the file before passing  a
          file descriptor for that file.  This poses a security risk, when the CAP_SYS_ADMIN capability is set for programs executed by unprivileged users.

       *  If  a  call to read(2) processes multiple events from the fanotify queue and an error occurs, the return value will be the total length of the events success‐
          fully copied to the user-space buffer before the error occurred.  The return value will not be -1, and errno will not be set.  Thus, the  reading  application
          has no way to detect the error.

EXAMPLES
       The two example programs below demonstrate the usage of the fanotify API.

   Example program: fanotify_example.c
       The  first  program  is an example of fanotify being used with its event object information passed in the form of a file descriptor.  The program marks the mount
       passed as a command-line argument and waits for events of type FAN_OPEN_PERM and FAN_CLOSE_WRITE.  When a permission event occurs, a FAN_ALLOW response is given.

       The following shell session shows an example of running this program.  This session involved editing the file /home/user/temp/notes.  Before the file was opened,
       a FAN_OPEN_PERM event occurred.  After the file was closed, a FAN_CLOSE_WRITE event occurred.  Execution of the program ends when the user presses the ENTER key.

           # ./fanotify_example /home
           Press enter key to terminate.
           Listening for events.
           FAN_OPEN_PERM: File /home/user/temp/notes
           FAN_CLOSE_WRITE: File /home/user/temp/notes

           Listening for events stopped.

   Program source: fanotify_example.c

       #define _GNU_SOURCE     /* Needed to get O_LARGEFILE definition */
       #include <errno.h>
       #include <fcntl.h>
       #include <limits.h>
       #include <poll.h>
       #include <stdio.h>
       #include <stdlib.h>
       #include <sys/fanotify.h>
       #include <unistd.h>

       /* Read all available fanotify events from the file descriptor 'fd'. */

       static void
       handle_events(int fd)
       {
           const struct fanotify_event_metadata *metadata;
           struct fanotify_event_metadata buf[200];
           ssize_t len;
           char path[PATH_MAX];
           ssize_t path_len;
           char procfd_path[PATH_MAX];
           struct fanotify_response response;

           /* Loop while events can be read from fanotify file descriptor. */

           for (;;) {

               /* Read some events. */

               len = read(fd, buf, sizeof(buf));
               if (len == -1 && errno != EAGAIN) {
                   perror("read");
                   exit(EXIT_FAILURE);
               }

               /* Check if end of available data reached. */

               if (len <= 0)
                   break;

               /* Point to the first event in the buffer. */

               metadata = buf;

               /* Loop over all events in the buffer. */

               while (FAN_EVENT_OK(metadata, len)) {

                   /* Check that run-time and compile-time structures match. */

                   if (metadata->vers != FANOTIFY_METADATA_VERSION) {
                       fprintf(stderr,
                               "Mismatch of fanotify metadata version.\n");
                       exit(EXIT_FAILURE);
                   }

                   /* metadata->fd contains either FAN_NOFD, indicating a
                      queue overflow, or a file descriptor (a nonnegative
                      integer). Here, we simply ignore queue overflow. */

                   if (metadata->fd >= 0) {

                       /* Handle open permission event. */

                       if (metadata->mask & FAN_OPEN_PERM) {
                           printf("FAN_OPEN_PERM: ");

                           /* Allow file to be opened. */

                           response.fd = metadata->fd;
                           response.response = FAN_ALLOW;
                           write(fd, &response, sizeof(response));
                       }

                       /* Handle closing of writable file event. */

                       if (metadata->mask & FAN_CLOSE_WRITE)
                           printf("FAN_CLOSE_WRITE: ");

                       /* Retrieve and print pathname of the accessed file. */

                       snprintf(procfd_path, sizeof(procfd_path),
                                "/proc/self/fd/%d", metadata->fd);
                       path_len = readlink(procfd_path, path,
                                           sizeof(path) - 1);
                       if (path_len == -1) {
                           perror("readlink");
                           exit(EXIT_FAILURE);
                       }

                       path[path_len] = '\0';
                       printf("File %s\n", path);

                       /* Close the file descriptor of the event. */

                       close(metadata->fd);
                   }

                   /* Advance to next event. */

                   metadata = FAN_EVENT_NEXT(metadata, len);
               }
           }
       }

       int
       main(int argc, char *argv[])
       {
           char buf;
           int fd, poll_num;
           nfds_t nfds;
           struct pollfd fds[2];

           /* Check mount point is supplied. */

           if (argc != 2) {
               fprintf(stderr, "Usage: %s MOUNT\n", argv[0]);
               exit(EXIT_FAILURE);
           }

           printf("Press enter key to terminate.\n");

           /* Create the file descriptor for accessing the fanotify API. */

           fd = fanotify_init(FAN_CLOEXEC | FAN_CLASS_CONTENT | FAN_NONBLOCK,
                              O_RDONLY | O_LARGEFILE);
           if (fd == -1) {
               perror("fanotify_init");
               exit(EXIT_FAILURE);
           }

           /* Mark the mount for:
              - permission events before opening files
              - notification events after closing a write-enabled
                file descriptor. */

           if (fanotify_mark(fd, FAN_MARK_ADD | FAN_MARK_MOUNT,
                             FAN_OPEN_PERM | FAN_CLOSE_WRITE, AT_FDCWD,
                             argv[1]) == -1) {
               perror("fanotify_mark");
               exit(EXIT_FAILURE);
           }

           /* Prepare for polling. */

           nfds = 2;

           fds[0].fd = STDIN_FILENO;       /* Console input */
           fds[0].events = POLLIN;

           fds[1].fd = fd;                 /* Fanotify input */
           fds[1].events = POLLIN;

           /* This is the loop to wait for incoming events. */

           printf("Listening for events.\n");

           while (1) {
               poll_num = poll(fds, nfds, -1);
               if (poll_num == -1) {
                   if (errno == EINTR)     /* Interrupted by a signal */
                       continue;           /* Restart poll() */

                   perror("poll");         /* Unexpected error */
                   exit(EXIT_FAILURE);
               }

               if (poll_num > 0) {
                   if (fds[0].revents & POLLIN) {

                       /* Console input is available: empty stdin and quit. */

                       while (read(STDIN_FILENO, &buf, 1) > 0 && buf != '\n')
                           continue;
                       break;
                   }

                   if (fds[1].revents & POLLIN) {

                       /* Fanotify events are available. */

                       handle_events(fd);
                   }
               }
           }

           printf("Listening for events stopped.\n");
           exit(EXIT_SUCCESS);
       }

   Example program: fanotify_fid.c
       The  second  program  is an example of fanotify being used with a group that identifies objects by file handles.  The program marks the filesystem object that is
       passed as a command-line argument and waits until an event of type FAN_CREATE has occurred.  The event mask indicates which type of  filesystem  object—either  a
       file or a directory—was created.  Once all events have been read from the buffer and processed accordingly, the program simply terminates.

       The following shell sessions show two different invocations of this program, with different actions performed on a watched object.

       The  first  session  shows  a  mark  being placed on /home/user.  This is followed by the creation of a regular file, /home/user/testfile.txt.  This results in a
       FAN_CREATE event being generated and reported against the file's parent watched directory object and with the created file name.  Program execution ends once all
       events captured within the buffer have been processed.

           # ./fanotify_fid /home/user
           Listening for events.
           FAN_CREATE (file created):
                   Directory /home/user has been modified.
                   Entry 'testfile.txt' is not a subdirectory.
           All events processed successfully. Program exiting.

           $ touch /home/user/testfile.txt              # In another terminal

       The  second  session shows a mark being placed on /home/user.  This is followed by the creation of a directory, /home/user/testdir.  This specific action results
       in a FAN_CREATE event being generated and is reported with the FAN_ONDIR flag set and with the created directory name.

           # ./fanotify_fid /home/user
           Listening for events.
           FAN_CREATE | FAN_ONDIR (subdirectory created):
                   Directory /home/user has been modified.
                   Entry 'testdir' is a subdirectory.
           All events processed successfully. Program exiting.

           $ mkdir -p /home/user/testdir          # In another terminal

   Program source: fanotify_fid.c

       #define _GNU_SOURCE
       #include <errno.h>
       #include <fcntl.h>
       #include <limits.h>
       #include <stdio.h>
       #include <stdlib.h>
       #include <sys/types.h>
       #include <sys/stat.h>
       #include <sys/fanotify.h>
       #include <unistd.h>

       #define BUF_SIZE 256

       int
       main(int argc, char *argv[])
       {
           int fd, ret, event_fd, mount_fd;
           ssize_t len, path_len;
           char path[PATH_MAX];
           char procfd_path[PATH_MAX];
           char events_buf[BUF_SIZE];
           struct file_handle *file_handle;
           struct fanotify_event_metadata *metadata;
           struct fanotify_event_info_fid *fid;
           const char *file_name;
           struct stat sb;

           if (argc != 2) {
               fprintf(stderr, "Invalid number of command line arguments.\n");
               exit(EXIT_FAILURE);
           }

           mount_fd = open(argv[1], O_DIRECTORY | O_RDONLY);
           if (mount_fd == -1) {
               perror(argv[1]);
               exit(EXIT_FAILURE);
           }

           /* Create an fanotify file descriptor with FAN_REPORT_DFID_NAME as
              a flag so that program can receive fid events with directory
              entry name. */

           fd = fanotify_init(FAN_CLASS_NOTIF | FAN_REPORT_DFID_NAME, 0);
           if (fd == -1) {
               perror("fanotify_init");
               exit(EXIT_FAILURE);
           }

           /* Place a mark on the filesystem object supplied in argv[1]. */

           ret = fanotify_mark(fd, FAN_MARK_ADD | FAN_MARK_ONLYDIR,
                               FAN_CREATE | FAN_ONDIR,
                               AT_FDCWD, argv[1]);
           if (ret == -1) {
               perror("fanotify_mark");
               exit(EXIT_FAILURE);
           }

           printf("Listening for events.\n");

           /* Read events from the event queue into a buffer. */

           len = read(fd, events_buf, sizeof(events_buf));
           if (len == -1 && errno != EAGAIN) {
               perror("read");
               exit(EXIT_FAILURE);
           }

           /* Process all events within the buffer. */

           for (metadata = (struct fanotify_event_metadata *) events_buf;
                   FAN_EVENT_OK(metadata, len);
                   metadata = FAN_EVENT_NEXT(metadata, len)) {
               fid = (struct fanotify_event_info_fid *) (metadata + 1);
               file_handle = (struct file_handle *) fid->handle;

               /* Ensure that the event info is of the correct type. */

               if (fid->hdr.info_type == FAN_EVENT_INFO_TYPE_FID ||
                   fid->hdr.info_type == FAN_EVENT_INFO_TYPE_DFID) {
                   file_name = NULL;
               } else if (fid->hdr.info_type == FAN_EVENT_INFO_TYPE_DFID_NAME) {
                   file_name = file_handle->f_handle +
                               file_handle->handle_bytes;
               } else {
                   fprintf(stderr, "Received unexpected event info type.\n");
                   exit(EXIT_FAILURE);
               }

               if (metadata->mask == FAN_CREATE)
                   printf("FAN_CREATE (file created):\n");

               if (metadata->mask == (FAN_CREATE | FAN_ONDIR))
                   printf("FAN_CREATE | FAN_ONDIR (subdirectory created):\n");

            /* metadata->fd is set to FAN_NOFD when the group identifies
               objects by file handles.  To obtain a file descriptor for
               the file object corresponding to an event you can use the
               struct file_handle that's provided within the
               fanotify_event_info_fid in conjunction with the
               open_by_handle_at(2) system call.  A check for ESTALE is
               done to accommodate for the situation where the file handle
               for the object was deleted prior to this system call. */

               event_fd = open_by_handle_at(mount_fd, file_handle, O_RDONLY);
               if (event_fd == -1) {
                   if (errno == ESTALE) {
                       printf("File handle is no longer valid. "
                               "File has been deleted\n");
                       continue;
                   } else {
                       perror("open_by_handle_at");
                       exit(EXIT_FAILURE);
                   }
               }

               snprintf(procfd_path, sizeof(procfd_path), "/proc/self/fd/%d",
                       event_fd);

               /* Retrieve and print the path of the modified dentry. */

               path_len = readlink(procfd_path, path, sizeof(path) - 1);
               if (path_len == -1) {
                   perror("readlink");
                   exit(EXIT_FAILURE);
               }

               path[path_len] = '\0';
               printf("\tDirectory '%s' has been modified.\n", path);

               if (file_name) {
                   ret = fstatat(event_fd, file_name, &sb, 0);
                   if (ret == -1) {
                       if (errno != ENOENT) {
                           perror("fstatat");
                           exit(EXIT_FAILURE);
                       }
                       printf("\tEntry '%s' does not exist.\n", file_name);
                   } else if ((sb.st_mode & S_IFMT) == S_IFDIR) {
                       printf("\tEntry '%s' is a subdirectory.\n", file_name);
                   } else {
                       printf("\tEntry '%s' is not a subdirectory.\n",
                               file_name);
                   }
               }

               /* Close associated file descriptor for this event. */

               close(event_fd);
           }

           printf("All events processed successfully. Program exiting.\n");
           exit(EXIT_SUCCESS);
       }

SEE ALSO
       fanotify_init(2), fanotify_mark(2), inotify(7)

Linux                                                                          2021-08-27                                                                    FANOTIFY(7)