πŸ’Ύ Archived View for gmi.noulin.net β€Ί man β€Ί man2 β€Ί mq_timedreceive.2.gmi captured on 2024-08-31 at 13:39:28. Gemini links have been rewritten to link to archived content

View Raw

More Information

⬅️ Previous capture (2022-06-12)

-=-=-=-=-=-=-

MQ_RECEIVE(3)                                                           Linux Programmer's Manual                                                          MQ_RECEIVE(3)

NAME
       mq_receive, mq_timedreceive - receive a message from a message queue

SYNOPSIS
       #include <mqueue.h>

       ssize_t mq_receive(mqd_t mqdes, char *msg_ptr,
                          size_t msg_len, unsigned int *msg_prio);

       #include <time.h>
       #include <mqueue.h>

       ssize_t mq_timedreceive(mqd_t mqdes, char *restrict msg_ptr,
                          size_t msg_len, unsigned int *restrict msg_prio,
                          const struct timespec *restrict abs_timeout);

       Link with -lrt.

   Feature Test Macro Requirements for glibc (see feature_test_macros(7)):

       mq_timedreceive():
           _POSIX_C_SOURCE >= 200112L

DESCRIPTION
       mq_receive() removes the oldest message with the highest priority from the message queue referred to by the message queue descriptor mqdes, and places it in the
       buffer pointed to by msg_ptr.  The msg_len argument specifies the size of the buffer pointed to by msg_ptr; this must be greater than or equal to the mq_msgsize
       attribute of the queue (see mq_getattr(3)).  If msg_prio is not NULL, then the buffer to which it points is used to return the priority associated with the re‐
       ceived message.

       If the queue is empty, then, by default, mq_receive() blocks until a message becomes available, or the call is interrupted by a signal handler.  If the O_NON‐
       BLOCK flag is enabled for the message queue description, then the call instead fails immediately with the error EAGAIN.

       mq_timedreceive() behaves just like mq_receive(), except that if the queue is empty and the O_NONBLOCK flag is not enabled for the message queue description,
       then abs_timeout points to a structure which specifies how long the call will block.  This value is an absolute timeout in seconds and nanoseconds since the
       Epoch, 1970-01-01 00:00:00 +0000 (UTC), specified in the following structure:

           struct timespec {
               time_t tv_sec;        /* seconds */
               long   tv_nsec;       /* nanoseconds */
           };

       If no message is available, and the timeout has already expired by the time of the call, mq_timedreceive() returns immediately.

RETURN VALUE
       On success, mq_receive() and mq_timedreceive() return the number of bytes in the received message; on error, -1 is returned, with errno set to indicate the er‐
       ror.

ERRORS
       EAGAIN The queue was empty, and the O_NONBLOCK flag was set for the message queue description referred to by mqdes.

       EBADF  The descriptor specified in mqdes was invalid or not opened for reading.

       EINTR  The call was interrupted by a signal handler; see signal(7).

       EINVAL The call would have blocked, and abs_timeout was invalid, either because tv_sec was less than zero, or because tv_nsec was less than zero or greater than
              1000 million.

       EMSGSIZE
              msg_len was less than the mq_msgsize attribute of the message queue.

       ETIMEDOUT
              The call timed out before a message could be transferred.

ATTRIBUTES
       For an explanation of the terms used in this section, see attributes(7).

       β”Œβ”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”€β”€β”€β”€β”
       β”‚Interface                                                                                                                             β”‚ Attribute     β”‚ Value   β”‚
       β”œβ”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€β”€β”€β”€β”€
       β”‚mq_receive(), mq_timedreceive()                                                                                                       β”‚ Thread safety β”‚ MT-Safe β”‚
       β””β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”€β”€β”€β”€β”˜

CONFORMING TO
       POSIX.1-2001, POSIX.1-2008.

NOTES
       On Linux, mq_timedreceive() is a system call, and mq_receive() is a library function layered on top of that system call.

SEE ALSO
       mq_close(3), mq_getattr(3), mq_notify(3), mq_open(3), mq_send(3), mq_unlink(3), mq_overview(7), time(7)

Linux                                                                          2021-03-22                                                                  MQ_RECEIVE(3)