đŸ Archived View for gmi.noulin.net âș man âș man2 âș get_thread_area.2.gmi captured on 2024-08-31 at 13:37:37. Gemini links have been rewritten to link to archived content
âŹ ïž Previous capture (2022-06-12)
-=-=-=-=-=-=-
SET_THREAD_AREA(2) Linux Programmer's Manual SET_THREAD_AREA(2) NAME get_thread_area, set_thread_area - manipulate thread-local storage information SYNOPSIS #include <sys/syscall.h> /* Definition of SYS_* constants */ #include <unistd.h> #if defined __i386__ || defined __x86_64__ # include <asm/ldt.h> /* Definition of struct user_desc */ int syscall(SYS_get_thread_area, struct user_desc *u_info); int syscall(SYS_set_thread_area, struct user_desc *u_info); #elif defined __m68k__ int syscall(SYS_get_thread_area); int syscall(SYS_set_thread_area, unsigned long tp); #elif defined __mips__ int syscall(SYS_set_thread_area, unsigned long addr); #endif Note: glibc provides no wrappers for these system calls, necessitating the use of syscall(2). DESCRIPTION These calls provide architecture-specific support for a thread-local storage implementation. At the moment, set_thread_area() is available on m68k, MIPS, and x86 (both 32-bit and 64-bit variants); get_thread_area() is available on m68k and x86. On m68k and MIPS, set_thread_area() allows storing an arbitrary pointer (provided in the tp argument on m68k and in the addr argument on MIPS) in the kernel data structure associated with the calling thread; this pointer can later be retrieved using get_thread_area() (see also NOTES for information regarding obtaining the thread pointer on MIPS). On x86, Linux dedicates three global descriptor table (GDT) entries for thread-local storage. For more information about the GDT, see the Intel Software Develâ oper's Manual or the AMD Architecture Programming Manual. Both of these system calls take an argument that is a pointer to a structure of the following type: struct user_desc { unsigned int entry_number; unsigned int base_addr; unsigned int limit; unsigned int seg_32bit:1; unsigned int contents:2; unsigned int read_exec_only:1; unsigned int limit_in_pages:1; unsigned int seg_not_present:1; unsigned int useable:1; #ifdef __x86_64__ unsigned int lm:1; #endif }; get_thread_area() reads the GDT entry indicated by u_info->entry_number and fills in the rest of the fields in u_info. set_thread_area() sets a TLS entry in the GDT. The TLS array entry set by set_thread_area() corresponds to the value of u_info->entry_number passed in by the user. If this value is in bounds, set_thread_area() writes the TLS descriptor pointed to by u_info into the thread's TLS array. When set_thread_area() is passed an entry_number of -1, it searches for a free TLS entry. If set_thread_area() finds a free TLS entry, the value of u_info->enâ try_number is set upon return to show which entry was changed. A user_desc is considered "empty" if read_exec_only and seg_not_present are set to 1 and all of the other fields are 0. If an "empty" descriptor is passed to set_thread_area(), the corresponding TLS entry will be cleared. See BUGS for additional details. Since Linux 3.19, set_thread_area() cannot be used to write non-present segments, 16-bit segments, or code segments, although clearing a segment is still acceptâ able. RETURN VALUE On x86, these system calls return 0 on success, and -1 on failure, with errno set to indicate the error. On MIPS and m68k, set_thread_area() always returns 0. On m68k, get_thread_area() returns the thread area pointer value (previously set via set_thread_area()). ERRORS EFAULT u_info is an invalid pointer. EINVAL u_info->entry_number is out of bounds. ENOSYS get_thread_area() or set_thread_area() was invoked as a 64-bit system call. ESRCH (set_thread_area()) A free TLS entry could not be located. VERSIONS set_thread_area() first appeared in Linux 2.5.29. get_thread_area() first appeared in Linux 2.5.32. CONFORMING TO set_thread_area() and get_thread_area() are Linux-specific and should not be used in programs that are intended to be portable. NOTES These system calls are generally intended for use only by threading libraries. arch_prctl(2) can interfere with set_thread_area() on x86. See arch_prctl(2) for more details. This is not normally a problem, as arch_prctl(2) is normally used only by 64-bit programs. On MIPS, the current value of the thread area pointer can be obtained using the instruction: rdhwr dest, $29 This instruction traps and is handled by kernel. BUGS On 64-bit kernels before Linux 3.19, one of the padding bits in user_desc, if set, would prevent the descriptor from being considered empty (see modify_ldt(2)). As a result, the only reliable way to clear a TLS entry is to use memset(3) to zero the entire user_desc structure, including padding bits, and then to set the read_exec_only and seg_not_present bits. On Linux 3.19, a user_desc consisting entirely of zeros except for entry_number will also be interpreted as a request to clear a TLS entry, but this behaved differently on older kernels. Prior to Linux 3.19, the DS and ES segment registers must not reference TLS entries. SEE ALSO arch_prctl(2), modify_ldt(2), ptrace(2) (PTRACE_GET_THREAD_AREA and PTRACE_SET_THREAD_AREA) Linux 2021-03-22 SET_THREAD_AREA(2)