šŸ’¾ Archived View for gmi.noulin.net ā€ŗ man ā€ŗ man1 ā€ŗ localedef.1.gmi captured on 2024-08-31 at 13:36:24. Gemini links have been rewritten to link to archived content

View Raw

More Information

ā¬…ļø Previous capture (2022-06-12)

-=-=-=-=-=-=-

LOCALEDEF(1)                                                                Linux User Manual                                                               LOCALEDEF(1)

NAME
       localedef - compile locale definition files

SYNOPSIS
       localedef [options] outputpath
       localedef --add-to-archive [options] compiledpath
       localedef --delete-from-archive [options] localename ...
       localedef --list-archive [options]
       localedef --help
       localedef --usage
       localedef --version

DESCRIPTION
       The localedef program reads the indicated charmap and input files, compiles them to a binary form quickly usable by the locale functions in the C library (setloā€
       cale(3), localeconv(3), etc.), and places the output in outputpath.

       The outputpath argument is interpreted as follows:

       *  If outputpath contains a slash character ('/'), it is interpreted as the name of the directory where the output definitions are to be stored.  In  this  case,
          there is a separate output file for each locale category (LC_TIME, LC_NUMERIC, and so on).

       *  If the --no-archive option is used, outputpath is the name of a subdirectory in /usr/lib/locale where per-category compiled files are placed.

       *  Otherwise, outputpath is the name of a locale and the compiled locale data is added to the archive file /usr/lib/locale/locale-archive.  A locale archive is a
          memory-mapped file which contains all the system-provided locales; it is used by all localized programs when the environment variable LOCPATH is not set.

       In any case, localedef aborts if the directory in which it tries to write locale files has not already been created.

       If no charmapfile is given, the value ANSI_X3.4-1968 (for ASCII) is used by default.  If no inputfile is given, or if it is given as a dash (-), localedef  reads
       from standard input.

OPTIONS
   Operation-selection options
       A few options direct localedef to do something other than compile locale definitions.  Only one of these options should be used at a time.

       --add-to-archive
              Add the compiledpath directories to the locale archive file.  The directories should have been created by previous runs of localedef, using --no-archive.

       --delete-from-archive
              Delete the named locales from the locale archive file.

       --list-archive
              List the locales contained in the locale archive file.

   Other options
       Some of the following options are sensible only for certain operations; generally, it should be self-evident which ones.  Notice that -f and -c are reversed from
       what you might expect; that is, -f is not the same as --force.

       -f charmapfile, --charmap=charmapfile
              Specify the file that defines the character set that is used by the input file.  If charmapfile contains a slash character ('/'), it is interpreted as the
              name of the character map.  Otherwise, the file is sought in the current directory and the default directory for character maps.  If the environment variā€
              able I18NPATH is set, $I18NPATH/charmaps/ and $I18NPATH/ are also searched after the current directory.  The  default  directory  for  character  maps  is
              printed by localedef --help.

       -i inputfile, --inputfile=inputfile
              Specify the locale definition file to compile.  The file is sought in the current directory and the default directory for locale definition files.  If the
              environment variable I18NPATH is set, $I18NPATH/locales/ and $I18NPATH are also searched after the current directory.  The default  directory  for  locale
              definition files is printed by localedef --help.

       -u repertoirefile, --repertoire-map=repertoirefile
              Read  mappings  from  symbolic names to Unicode code points from repertoirefile.  If repertoirefile contains a slash character ('/'), it is interpreted as
              the pathname of the repertoire map.  Otherwise, the file is sought in the current directory and the default directory for repertoire maps.  If  the  enviā€
              ronment variable I18NPATH is set, $I18NPATH/repertoiremaps/ and $I18NPATH are also searched after the current directory.  The default directory for reperā€
              toire maps is printed by localedef --help.

       -A aliasfile, --alias-file=aliasfile
              Use aliasfile to look up aliases for locale names.  There is no default aliases file.

       -c, --force
              Write the output files even if warnings were generated about the input file.

       -v, --verbose
              Generate extra warnings about errors that are normally ignored.

       --big-endian
              Generate big-endian output.

       --little-endian
              Generate little-endian output.

       --no-archive
              Do not use the locale archive file, instead create outputpath as a subdirectory in the same directory as the locale archive file, and create separate outā€
              put files for locale categories in it.  This is helpful to prevent system locale archive updates from overwriting custom locales created with localedef.

       --no-hard-links
              Do not create hard links between installed locales.

       --no-warnings=warnings
              Comma-separated list of warnings to disable.  Supported warnings are ascii and intcurrsym.

       --posix
              Conform  strictly  to  POSIX.   Implies  --verbose.   This option currently has no other effect.  POSIX conformance is assumed if the environment variable
              POSIXLY_CORRECT is set.

       --prefix=pathname
              Set the prefix to be prepended to the full archive pathname.  By default, the prefix is empty.  Setting the prefix to foo, the archive would be placed  in
              foo/usr/lib/locale/locale-archive.

       --quiet
              Suppress all notifications and warnings, and report only fatal errors.

       --replace
              Replace a locale in the locale archive file.  Without this option, if the locale is in the archive file already, an error occurs.

       --warnings=warnings
              Comma-separated list of warnings to enable.  Supported warnings are ascii and intcurrsym.

       -?, --help
              Print a usage summary and exit.  Also prints the default paths used by localedef.

       --usage
              Print a short usage summary and exit.

       -V, --version
              Print the version number, license, and disclaimer of warranty for localedef.

EXIT STATUS
       One of the following exit values can be returned by localedef:

       0      Command completed successfully.

       1      Warnings or errors occurred, output files were written.

       4      Errors encountered, no output created.

ENVIRONMENT
       POSIXLY_CORRECT
              The --posix flag is assumed if this environment variable is set.

       I18NPATH
              A colon-separated list of search directories for files.

FILES
       /usr/share/i18n/charmaps
              Usual default character map path.

       /usr/share/i18n/locales
              Usual default path for locale definition files.

       /usr/share/i18n/repertoiremaps
              Usual default repertoire map path.

       /usr/lib/locale/locale-archive
              Usual default locale archive location.

       /usr/lib/locale
              Usual default path for compiled individual locale data files.

       outputpath/LC_ADDRESS
              An output file that contains information about formatting of addresses and geography-related items.

       outputpath/LC_COLLATE
              An output file that contains information about the rules for comparing strings.

       outputpath/LC_CTYPE
              An output file that contains information about character classes.

       outputpath/LC_IDENTIFICATION
              An output file that contains metadata about the locale.

       outputpath/LC_MEASUREMENT
              An output file that contains information about locale measurements (metric versus US customary).

       outputpath/LC_MESSAGES/SYS_LC_MESSAGES
              An output file that contains information about the language messages should be printed in, and what an affirmative or negative answer looks like.

       outputpath/LC_MONETARY
              An output file that contains information about formatting of monetary values.

       outputpath/LC_NAME
              An output file that contains information about salutations for persons.

       outputpath/LC_NUMERIC
              An output file that contains information about formatting of nonmonetary numeric values.

       outputpath/LC_PAPER
              An output file that contains information about settings related to standard paper size.

       outputpath/LC_TELEPHONE
              An output file that contains information about formats to be used with telephone services.

       outputpath/LC_TIME
              An output file that contains information about formatting of data and time values.

CONFORMING TO
       POSIX.1-2008.

EXAMPLES
       Compile the locale files for Finnish in the UTF-8 character set and add it to the default locale archive with the name fi_FI.UTF-8:

           localedef -f UTF-8 -i fi_FI fi_FI.UTF-8

       The next example does the same thing, but generates files into the fi_FI.UTF-8 directory which can then be used by programs when the environment variable LOCPATH
       is set to the current directory (note that the last argument must contain a slash):

           localedef -f UTF-8 -i fi_FI ./fi_FI.UTF-8

SEE ALSO
       locale(1), charmap(5), locale(5), repertoiremap(5), locale(7)

Linux                                                                          2021-03-22                                                                   LOCALEDEF(1)