💾 Archived View for benjaminja.com › log › 2017 captured on 2024-08-25 at 00:19:30. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2024-06-16)
-=-=-=-=-=-=-
2017-10-29 - RC Remote API: Pairing/Connecting
I was able to get progress on the api for my remote. It can now successfully pair, and connect. I still have yet to send a steady stream of data; That will be my next goal.
2017-10-24 - RC Remote Software
Over the course of the past year or so, I have torn apart an old RC Remote and put new electronics in. I think I have blogged about it before I rebuilt my website, and hope to restore those lost posts some day.
2017-06-17 - Weatherstation: Software
I finished wiring the station, though I would not be surprised if I need to make some last minute adjustments. The last bit of wiring I have done is interfacing with the existing hardware. The rain gauge and anemometer connect directly to the board with an internal pull-up activated.
2017-04-15 - Weather Station Part 2
I have started working on the main board for the station. Adding the transceiver, barometer, temperature, and humidity sensor. It is going pretty well so far. I have not yet tested the rf24 module, though the two other modules I have confirmed to work.
I am starting a weather station project, taking an old broken weather station, and getting it to work with Arduino and a Raspberry Pi web server. After a quick inspection of the ports on the old station transmitter, I found that the weather vain uses a 4 wire plug.