💾 Archived View for chirale.org › 2016-10-20_1956.gmi captured on 2024-08-24 at 23:58:04. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2024-05-12)
-=-=-=-=-=-=-
This howto is also valid for a copy from a larger HDD to a smaller SSD.
It worked fine with me but do this steps at your own risk.
What you need:
GParted live Clonezilla live Windows 7 disk
Part 1: Plug SSD to SATA
Leave the old HDD where it is Place the SSD to a free SATA port (e.g. SATA 2 plug) Plug the PSU power connector into the SSD
Part 2: Shrink partitions with GParted
Do not trust the claimed capacity of the SSD: calculate the real capacity of your new SSD disk manually or with a tool like this Boot with the GParted disk Shrink the last partition on the disk to leave enough unallocated space to fit the SSD real disk capacity: the sum of all the partitions must be less than the real capacity new disk. Keep some margin, you’ll resize the partition later (Part 5). Remove the Gparted disk and reboot
Part 3: Clone with Clonezilla
Boot from the Clonezilla disk
Select Disk to disk clone: the HDD as source, the SSD as target
Select Expert mode
In the advanced parameters list, look for -icds option (Skip checking destination disk size before creating partition table) and check it with the space bar: without this, you cannot copy a larger disk into a smaller one
Tip: Someone suggests to check the -k1 option to recreate new partitions to fit the disk: in an early Clonezilla version it leads to a segmentation fault error so I has to fix partitions later. With a more recent version (year 2020) it works very well and no further Fix boot step is needed.
You will get a command like this:
/usr/sbin/ocs-onthefly -g auto -e1 auto -e2 -j2 -r -icds -f sda -t sdb
Let Clonezilla clone partitions from HDD to SSD
Shutdown when asked
Power down the computer then connect the SSD to SATA 1 in place of the old HDD
Power up the computer
If you get a Blue Screen of Death (BSOD) after boot do the steps on Part 4, if not skip to Part 5
Part 4: Fix boot (without -k1 option)
Insert the Windows 7 disk and boot (a comprehensive howto here) Select the Repair computer system recovery (do not do automatically repair) Select Command prompt from System recovery options Type these commands: bootreg.exe /fixmbr bootreg.exe /fixboot bootreg.exe /rebuildbcd Reboot Wait for the disk scans Log in to Windows: a new driver for the SSD will be installed Reboot when asked Log in again: your system is ready and running on SSD
Part 5: Occupy all available space
Now you can do the reverse of Part 2: insert GParted disk and boot from it Reclaim the unallocated space expanding the last partition to occupy all the unallocated space Reboot and enjoy your new fast disk
https://web.archive.org/web/20161020000000*/http://www.endmemo.com/data/diskcapacity.php
https://web.archive.org/web/20161020000000*/http://superuser.com/a/616959