💾 Archived View for gmi.noulin.net › man › man3 › pthread_mutexattr_getrobust_np.3.gmi captured on 2024-08-18 at 19:58:03. Gemini links have been rewritten to link to archived content

View Raw

More Information

⬅️ Previous capture (2023-09-08)

-=-=-=-=-=-=-

PTHREAD_MUTEXATTR_SETROBUST(3)                                          Linux Programmer's Manual                                         PTHREAD_MUTEXATTR_SETROBUST(3)

NAME
       pthread_mutexattr_getrobust, pthread_mutexattr_setrobust - get and set the robustness attribute of a mutex attributes object

SYNOPSIS
       #include <pthread.h>

       int pthread_mutexattr_getrobust(const pthread_mutexattr_t *attr,
                                       int *robustness);
       int pthread_mutexattr_setrobust(pthread_mutexattr_t *attr,
                                       int robustness);

       Compile and link with -pthread.

   Feature Test Macro Requirements for glibc (see feature_test_macros(7)):

       pthread_mutexattr_getrobust(), pthread_mutexattr_setrobust():
           _POSIX_C_SOURCE >= 200809L

DESCRIPTION
       The  pthread_mutexattr_getrobust()  function places the value of the robustness attribute of the mutex attributes object referred to by attr in *robustness.  The
       pthread_mutexattr_setrobust() function sets the value of the robustness attribute of the mutex attributes object referred to by attr to the  value  specified  in
       *robustness.

       The robustness attribute specifies the behavior of the mutex when the owning thread dies without unlocking the mutex.  The following values are valid for robust‐
       ness:

       PTHREAD_MUTEX_STALLED
              This is the default value for a mutex attributes object.  If a mutex is initialized with the PTHREAD_MUTEX_STALLED attribute and its  owner  dies  without
              unlocking it, the mutex remains locked afterwards and any future attempts to call pthread_mutex_lock(3) on the mutex will block indefinitely.

       PTHREAD_MUTEX_ROBUST
              If  a  mutex  is  initialized  with  the  PTHREAD_MUTEX_ROBUST  attribute and its owner dies without unlocking it, any future attempts to call pthread_mu‐
              tex_lock(3) on this mutex will succeed and return EOWNERDEAD to indicate that the original owner no longer exists and the  mutex  is  in  an  inconsistent
              state.  Usually after EOWNERDEAD is returned, the next owner should call pthread_mutex_consistent(3) on the acquired mutex to make it consistent again be‐
              fore using it any further.

              If the next owner unlocks the mutex using pthread_mutex_unlock(3) before making it consistent, the mutex will be permanently unusable and  any  subsequent
              attempts  to  lock  it  using pthread_mutex_lock(3) will fail with the error ENOTRECOVERABLE.  The only permitted operation on such a mutex is pthread_mu‐
              tex_destroy(3).

              If the next owner terminates before calling pthread_mutex_consistent(3), further pthread_mutex_lock(3) operations on this mutex will  still  return  EOWN‐
              ERDEAD.

       Note  that the attr argument of pthread_mutexattr_getrobust() and pthread_mutexattr_setrobust() should refer to a mutex attributes object that was initialized by
       pthread_mutexattr_init(3), otherwise the behavior is undefined.

RETURN VALUE
       On success, these functions return 0.  On error, they return a positive error number.

       In the glibc implementation, pthread_mutexattr_getrobust() always return zero.

ERRORS
       EINVAL A value other than PTHREAD_MUTEX_STALLED or PTHREAD_MUTEX_ROBUST was passed to pthread_mutexattr_setrobust().

VERSIONS
       pthread_mutexattr_getrobust() and pthread_mutexattr_setrobust() were added to glibc in version 2.12.

CONFORMING TO
       POSIX.1-2008.

NOTES
       In the Linux implementation, when using process-shared robust mutexes, a waiting thread also receives the EOWNERDEAD notification if the owner of a robust  mutex
       performs  an  execve(2) without first unlocking the mutex.  POSIX.1 does not specify this detail, but the same behavior also occurs in at least some other imple‐
       mentations.

       Before the addition of pthread_mutexattr_getrobust() and pthread_mutexattr_setrobust() to POSIX, glibc defined the following equivalent nonstandard functions  if
       _GNU_SOURCE was defined:

       int pthread_mutexattr_getrobust_np(const pthread_mutexattr_t *attr,
                                          int *robustness);
       int pthread_mutexattr_setrobust_np(const pthread_mutexattr_t *attr,
                                          int robustness);

       Correspondingly, the constants PTHREAD_MUTEX_STALLED_NP and PTHREAD_MUTEX_ROBUST_NP were also defined.

       These  GNU-specific APIs, which first appeared in glibc 2.4, are nowadays obsolete and should not be used in new programs; since glibc 2.34 these APIs are marked
       as deprecated.

EXAMPLES
       The program below demonstrates the use of the robustness attribute of a mutex attributes object.  In this program, a thread holding the  mutex  dies  prematurely
       without  unlocking the mutex.  The main thread subsequently acquires the mutex successfully and gets the error EOWNERDEAD, after which it makes the mutex consis‐
       tent.

       The following shell session shows what we see when running this program:

           $ ./a.out
           [original owner] Setting lock...
           [original owner] Locked. Now exiting without unlocking.
           [main] Attempting to lock the robust mutex.
           [main] pthread_mutex_lock() returned EOWNERDEAD
           [main] Now make the mutex consistent
           [main] Mutex is now consistent; unlocking

   Program source
       #include <stdlib.h>
       #include <stdio.h>
       #include <unistd.h>
       #include <pthread.h>
       #include <errno.h>

       #define handle_error_en(en, msg) \
               do { errno = en; perror(msg); exit(EXIT_FAILURE); } while (0)

       static pthread_mutex_t mtx;

       static void *
       original_owner_thread(void *ptr)
       {
           printf("[original owner] Setting lock...\n");
           pthread_mutex_lock(&mtx);
           printf("[original owner] Locked. Now exiting without unlocking.\n");
           pthread_exit(NULL);
       }

       int
       main(int argc, char *argv[])
       {
           pthread_t thr;
           pthread_mutexattr_t attr;
           int s;

           pthread_mutexattr_init(&attr);

           pthread_mutexattr_setrobust(&attr, PTHREAD_MUTEX_ROBUST);

           pthread_mutex_init(&mtx, &attr);

           pthread_create(&thr, NULL, original_owner_thread, NULL);

           sleep(2);

           /* "original_owner_thread" should have exited by now. */

           printf("[main] Attempting to lock the robust mutex.\n");
           s = pthread_mutex_lock(&mtx);
           if (s == EOWNERDEAD) {
               printf("[main] pthread_mutex_lock() returned EOWNERDEAD\n");
               printf("[main] Now make the mutex consistent\n");
               s = pthread_mutex_consistent(&mtx);
               if (s != 0)
                   handle_error_en(s, "pthread_mutex_consistent");
               printf("[main] Mutex is now consistent; unlocking\n");
               s = pthread_mutex_unlock(&mtx);
               if (s != 0)
                   handle_error_en(s, "pthread_mutex_unlock");

               exit(EXIT_SUCCESS);
           } else if (s == 0) {
               printf("[main] pthread_mutex_lock() unexpectedly succeeded\n");
               exit(EXIT_FAILURE);
           } else {
               printf("[main] pthread_mutex_lock() unexpectedly failed\n");
               handle_error_en(s, "pthread_mutex_lock");
           }
       }

SEE ALSO
       get_robust_list(2), set_robust_list(2), pthread_mutex_consistent(3), pthread_mutex_init(3), pthread_mutex_lock(3), pthreads(7)

Linux                                                                          2021-03-22                                                 PTHREAD_MUTEXATTR_SETROBUST(3)