💾 Archived View for gmi.noulin.net › rfc › rfc1805.gmi captured on 2024-08-19 at 00:10:06. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2021-12-05)
-=-=-=-=-=-=-
Keywords: Betsi, Security, Cryptography
Network Working Group A. Rubin
Request for Comments: 1805 Bellcore
Category: Informational June 1995
Location-Independent Data/Software Integrity Protocol
Status of this Memo
This memo provides information for the Internet community. This memo
does not specify an Internet standard of any kind. Distribution of
this memo is unlimited.
Abstract
This memo describes a protocol for adding integrity assurance to
files that are distributed across the Internet. This protocol is
intended for the distribution of software, data, documents, and any
other file that is subject to malicious modification. The protocol
described here is intended to provide assurances of integrity and
time. A trusted third party is required.
Introduction
One problem with any system for verifying the integrity of a file is
that the verifying program itself may be attacked. Thus, although
users may be reassured by their software that a file has not changed,
in reality, the file, and the verifier might have both changed.
Because of this danger, a protocol that does not rely on the
distribution of some special software, but rather, is based entirely
on widely used standards, is very useful. It allows users to build
their own software, or obtain trusted copies of software to do
integrity checking independently. Therefore, the protocol described
in this memo is composed of ASCII messages that may be sent using e-
mail or any other means. There is an existing implementation, Betsi
[1], that is designed this way. Betsi has been in existence since
August, 1994, and is operational on the Internet. It can be accessed
by sending e-mail to certify@bellcore.com with subject 'help', or via
the world wide web at http://info.bellcore.com/BETSI/betsi.html.
Rubin Informational [Page 1]
RFC 1805 Location-Independent Data/Software Integrity Protocol June 1995
The purpose of the proposed protocol is for authors to be able to
distribute their files to users on the internet with guarantees of
time and integrity, by use of a trusted third party. The protocol is
divided into several phases:
I. Author registration
II. Author verification
III. File Certification
IV. File Distribution
V. File Integrity Verification
Phases I, III, IV, and V are defined in the protocol. Phase II is
intentionally not defined. Author verification can be different for
different applications, and the particular method chosen for phase II
is identified in phases III and V. It is the hope that further
Internet Drafts will describe the various possibilities for phase II.
This memo describes the method for author verification in the Betsi
system, and makes several recommendations.
Requirements
It is important that the integrity and time information be
independent from the location of the file. Lowry [2] defines a syntax
and protocols for location-independent objects. His system requires
that end-users possess special software, and is still in the
prototype stage. The protocol described in this memo has been
implemented, and is already in wide-spread use across the Internet.
It is simple, compact and easy to understand. The disadvantage of a
very complex system is that users may not be inclined to trust the
designers' claims if they cannot understand how it works.
Assumptions
The three entities in the protocol are Authors (A), Users (U), and a
Trusted third party (T). The protocol described here is algorithm
independent, and all of the messages are in ASCII. It is assumed
that for each signature scheme used, there is a well-known
verification key associated with T.
Any signature scheme may be used, as long as there is a standard
ASCII representation of a digital signature. PGP [3] meets all of the
above requirements, but it also requires encryption, and thus, export
restrictions may deter some users. The DSS [4] is recommended, but
some suspect that it contains a trapdoor [5] based on some results by
Simmons [6]. It is also not clear that there is a standard for
generating an ASCII signature using the DSS.
Rubin Informational [Page 2]
RFC 1805 Location-Independent Data/Software Integrity Protocol June 1995
High level view
The protocol works as follows. In the first phase, authors request to
register with the trusted third party, T. Any registered author can
distribute files with integrity and time assurance. Time assurance
means that there is a guarantee that a file existed at a given time.
In the second phase, T somehow verifies the identity of an author who
requests to register. Registration is not complete until this
verification takes place.
To distribute a file, a registered author computes a cryptographic
hash of the file, and sends it over an integrity protected channel to
T. T then creates an object containing the hash, the current time,
the name of the author, the name of the file, and some other
information, seals the object, and returns it to the author. The
author can then use the sealed object as a location-independent proof
of the integrity and timeliness of the file.
Any user who obtains the file and the sealed object, can compute the
cryptographic hash of the file, check the seal on the object, and
verify that the object has not changed.
The trusted third party must maintain a widely available, dated, and
signed, certificate revocation list (CRL). Users who access a file
with a certificate must check that the CRL is current and complete,
and that the certificate is not listed.
Author registration
In the first phase, authors request to register with the trusted
third party, T. The author sends an ASCII message to T containing
keywords followed by values. Some of the fields are optional, and are
marked with a *. The values are represented with angle brackets < >.
AUTHOR-NAME= <first m. last>
* AUTHOR-ORGANIZATION= <Company, school, etc.>
* AUTHOR-EMAIL= <e-mail address>
AUTHOR-LOCATION= <city, state>
* AUTHOR-PHONE-1= <Home phone>
* AUTHOR-PHONE-2= <Work phone>
SIGNATURE-SYSTEM= <name of signature system>
* MISC-FIELD-n= <Any number of additional fields can be defined here>
* AUTHOR-PUBLIC-KEY=
* <public key of author>
Each of the fields contains the keyword and the value on the same
line, except for the public key. An ASCII version of the key is
pasted on the line after the AUTHOR-PUBLIC-KEY keyword. The format
Rubin Informational [Page 3]
RFC 1805 Location-Independent Data/Software Integrity Protocol June 1995
of this ASCII key will depend on the signature system used. The
public key field is optional. The user may include his own, or one
can be supplied by T during phase II. T responds with a message that
the request was received, and that the user should wait for off-line
verification. If a user receives this confirmation message, and he
did not request to register, he knows that somebody may be attempting
to register on his behalf.
Author verification
The trusted third party, T, must verify the identity of the author
who sent the request message in phase I. The rest of the information
in the request is also confirmed. This process takes place off-line.
The method used is intentionally left open, but whatever technique is
used must be identified in phases III and V.
In the Betsi implementation, T uses the phone company infrastructure.
T calls directory assistance (1-xxx-555-1212) in the city of the
author and asks for the author's number. Then, that number is called,
and T asks the author to verify the information sent in the request.
In particular, T insures that the author has registered his correct
public key. Or, in some cases, T assigns a public key to the author.
As Betsi is only operational in the United States, other mechanisms
need to be in place for verifying identities of people
internationally. Hopefully, standards for doing this will arise. The
rest of the protocol is independent of whatever mechanism is used for
off-line identity and public key verification.
File certification
Registered authors can obtain location-independent objects from the
trusted third party, T, that vouch for the integrity and time of any
file.
An author generates the following ASCII message and signs it with the
signature key that corresponds to the public key that was registered.
AUTHOR-NAME= <first m. last>
HASH-FUNCTION= <md5,sha, etc.>
* FILE-LOCATION= <ftp site/directory>
<list of hashes>
Each entry in the <list of hashes> consists of two mandatory fields
and one optional one, as follows:
<fixed-length hash of file> <name of file> <version number>
Rubin Informational [Page 4]
RFC 1805 Location-Independent Data/Software Integrity Protocol June 1995
The <fixed-length hash of file> is a fixed-length hexadecimal value
corresponding to the hash of the contents of the file. For MD5, the
output is 32 hexadecimal digits. There is one space between the
fields, and the name of the file contains no spaces. The <version
number> is optional. The <list of hashes> contains at least one
entry, and may contain as many as the author wants. The message is
signed and sent to the trusted third party, T.
When T receives the request for file certification, he verifies the
signature on the request and creates a location-independent
certificate for the request. The certificate is signed by T, and
contains the following information:
TRUSTED-PARTY= <identity of T>
AUTHOR-VERIFICATION-METHOD= <how authors are verified off-line>
AUTHOR-NAME= <first m. last>
AUTHOR-ORGANIZATION= <company, school, etc.>
HASH-FUNCTION= <md5,sha, etc.>
DATE= <date>
<list of hashes>
The <list of hashes> is the same as the one in the author's request.
T signs the message and sends it to the author, who verifies the
signature and the contents of the certificate. Note that the method
for off-line author verification is included in the certificate.
File distribution
In the file distribution phase, the author distributes his file,
along with the certificate from T. The file and certificate are
location-independent. That is, the integrity and timeliness of the
file can be verified independently from the location of the file and
the certificate. This means that files can be distributed from
insecure sites, and over insecure networks.
File integrity verification
The final phase is file integrity verification. A user obtains the
public key of the trusted third party, T, from several independent
sources, until he is convinced of its authenticity. The user then
verifies the certificate for a file, and decides whether or not he
trusts the method of off-line verification that was used by T. If so,
then he extracts the name of the hash function in the certificate,
and performs the hash function on the actual file. Finally, the user
compares the hash of the file to the hash in the certificate. The
user also checks the date in the certificate if he is concerned with
this information. As a last step, the user checks the highly
available certificate revocation list of T, to see if the current
Rubin Informational [Page 5]
RFC 1805 Location-Independent Data/Software Integrity Protocol June 1995
certificate is listed. When all of this has concluded, if none of
the assumptions of the system has been violated, then the user is
assured of the integrity and timeliness of the file.
References
[1] Rubin, A., "Trusted Distribution of Software over the Internet",
Internet Society Symposium on Network and Distributed System
Security," pp. 47-53, 1995.
[2] Lowrey, J., "Location-Independent Information Object Security",
Internet Society Symposium on Network and Distributed System
Security," pp. 54-62, 1995.
[3] Zimmerman, P., "PGP User's Guide", 1992.
[4] National Institute for Standards and Technology, Digital
Signature Standard (DSS), Federal Register 56(169), 1991.
[5] Schneier, B., "Applied Cryptography", ISBN 0-471-59756-2.
[6] Simmons, G., "The Subliminal Channels of the U.S. Digital
Signature Algorithm (DSA)", Proceedings of the 3rd Symposium on:
State and Progress of research in Cryptography, pp. 35-54, 1993.
Security Considerations
Security issues are discussed throughout this memo.
Author's Address
Aviel D. Rubin
Bellcore
Morristown, NJ 07960
USA
Phone: +1 201 829 5922
Fax: +1 201 829 2645
EMail: rubin@bellcore.com
Rubin Informational [Page 6]