💾 Archived View for gemini.quux.org › 9 › Archives › mirrors › x2ftp.oulu.fi › pub › msdos › program… captured on 2024-08-18 at 23:00:24.
-=-=-=-=-=-=-
Neutral File Format,
by Eric Haines, 3D/Eye Inc, 2359 North Triphammer Road, Ithaca, NY 14850
email: erich@eye.com, wrath.cs.cornell.edu!eye!erich
Draft #1, 10/3/88
Version 2.7, as of 5/22/90 - added information on hither, light color
Version 3.0, 12/17/90 - minor information changes
The NFF (Neutral File Format) is designed as a minimal scene description
language. The language was designed in order to test various rendering
algorithms and efficiency schemes. It is meant to describe the geometry and
basic surface characteristics of objects, the placement of lights, and the
viewing frustum for the eye. Some additional information is provided for
esthetic reasons (such as the color of the objects, which is not strictly
necessary for testing the efficiency of rendering algorithms).
Future enhancements could include: circle and torus objects, spline surfaces
with trimming curves, directional lights, characteristics for positional
lights, CSG descriptions, and probably more by the time you read this.
Comments, suggestions, and criticisms are all welcome.
At present the NFF file format is used in conjunction with the SPD (Standard
Procedural Database) software, a package designed to create a variety of
databases for testing rendering schemes. For more information about SPD see
"A Proposal for Standard Graphics Environments," IEEE Computer Graphics and
Applications, vol. 7, no. 11, November 1987, pp. 3-5. See IEEE CG&A, vol. 8,
no. 1, January 1988, p. 18 for the correct image of the tree database (the
only difference is that the sky is blue, not orange).
The SPD package is available via anonymous FTP from:
freedom.graphics.cornell.edu [128.84.247.85]
weedeater.math.yale.edu [130.132.23.17]
cs.uoregon.edu [128.223.4.13]
among others. For those without FTP access, write to the netlib automatic
mailer: research!netlib and netlib@ornl.gov are the sites. Send a one line
message "send index" for more information, or "send haines from graphics" for
the latest version of the SPD package. If you're looking for a good scene
description language, see Craig Kolb's RayShade software (found on weedeater).
NFF is meant for testing efficiency schemes and so has minimal support for
lighting and shading.
By providing a minimal interface, NFF is meant to act as a simple format to
allow the programmer to quickly write filters to move from NFF to the
local file format. Presently the following entities are supported:
A simple perspective frustum
A background color description
A positional (vs. directional) light source description
A surface properties description
Polygon, polygonal patch, cylinder/cone, and sphere descriptions
Files are output as lines of text. For each entity, the first field defines
its type. The rest of the line and possibly other lines contain further
information about the entity. Entities include:
"v" - viewing vectors and angles
"b" - background color
"l" - positional light location
"f" - object material properties
"c" - cone or cylinder primitive
"s" - sphere primitive
"p" - polygon primitive
"pp" - polygonal patch primitive
These are explained in depth below.
--------
Viewpoint location. Description:
"v"
"from" Fx Fy Fz
"at" Ax Ay Az
"up" Ux Uy Uz
"angle" angle
"hither" hither
"resolution" xres yres
Format:
v
from %g %g %g
at %g %g %g
up %g %g %g
angle %g
hither %g
resolution %d %d
The parameters are:
From: the eye location in XYZ.
At: a position to be at the center of the image, in XYZ world
coordinates. A.k.a. "lookat".
Up: a vector defining which direction is up, as an XYZ vector.
Angle: in degrees, defined as from the center of top pixel row to
bottom pixel row and left column to right column.
Hither: distance of the hither plane (if any) from the eye. Mostly
needed for hidden surface algorithms.
Resolution: in pixels, in x and in y.
Note that no assumptions are made about normalizing the data (e.g. the
from-at distance does not have to be 1). Also, vectors are not
required to be perpendicular to each other.
For all databases some viewing parameters are always the same:
Yon is "at infinity."
Aspect ratio is 1.0.
A view entity must be defined before any objects are defined (this
requirement is so that NFF files can be displayed on the fly by hidden
surface machines).
--------
Background color. A color is simply RGB with values between 0 and 1:
"b" R G B
Format:
b %g %g %g
If no background color is set, assume RGB = {0,0,0}.
--------
Positional light. A light is defined by XYZ position. Description:
"l" X Y Z [R G B]
Format:
l %g %g %g [%g %g %g]
All light entities must be defined before any objects are defined (this
requirement is so that NFF files can be used by hidden surface machines).
Lights have a non-zero intensity of no particular value, if not specified
(i.e. the program can determine a useful intensity as desired); the
red/green/blue color of the light can optionally be specified.
--------
Fill color and shading parameters. Description:
"f" red green blue Kd Ks Shine T index_of_refraction
Format:
f %g %g %g %g %g %g %g %g
RGB is in terms of 0.0 to 1.0.
Kd is the diffuse component, Ks the specular, Shine is the Phong cosine
power for highlights, T is transmittance (fraction of contribution of the
transmitting ray). Usually, 0 <= Kd <= 1 and 0 <= Ks <= 1, though it is
not required that Kd + Ks == 1. Note that transmitting objects ( T > 0 )
are considered to have two sides for algorithms that need these (normally
objects have one side).
The fill color is used to color the objects following it until a new color
is assigned.
--------
Objects: all objects are considered one-sided, unless the second side is
needed for transmittance calculations (e.g. you cannot throw out the second
intersection of a transparent sphere in ray tracing).
Cylinder or cone. A cylinder is defined as having a radius and an axis
defined by two points, which also define the top and bottom edge of the
cylinder. A cone is defined similarly, the difference being that the apex
and base radii are different. The apex radius is defined as being smaller
than the base radius. Note that the surface exists without endcaps. The
cone or cylinder description:
"c"
base.x base.y base.z base_radius
apex.x apex.y apex.z apex_radius
Format:
c
%g %g %g %g
%g %g %g %g
A negative value for both radii means that only the inside of the object is
visible (objects are normally considered one sided, with the outside
visible). Note that the base and apex cannot be coincident for a cylinder
or cone. Making them coincident could be used to define endcaps, but none
of the SPD scenes currently make use of this definition.
--------
Sphere. A sphere is defined by a radius and center position:
"s" center.x center.y center.z radius
Format:
s %g %g %g %g
If the radius is negative, then only the sphere's inside is visible
(objects are normally considered one sided, with the outside visible).
Currently none of the SPD scenes make use of negative radii.
--------
Polygon. A polygon is defined by a set of vertices. With these databases,
a polygon is defined to have all points coplanar. A polygon has only
one side, with the order of the vertices being counterclockwise as you
face the polygon (right-handed coordinate system). The first two edges
must form a non-zero convex angle, so that the normal and side visibility
can be determined by using just the first three vertices. Description:
"p" total_vertices
vert1.x vert1.y vert1.z
[etc. for total_vertices vertices]
Format:
p %d
[ %g %g %g ] <-- for total_vertices vertices
--------
Polygonal patch. A patch is defined by a set of vertices and their normals.
With these databases, a patch is defined to have all points coplanar.
A patch has only one side, with the order of the vertices being
counterclockwise as you face the patch (right-handed coordinate system).
The first two edges must form a non-zero convex angle, so that the normal
and side visibility can be determined. Description:
"pp" total_vertices
vert1.x vert1.y vert1.z norm1.x norm1.y norm1.z
[etc. for total_vertices vertices]
Format:
pp %d
[ %g %g %g %g %g %g ] <-- for total_vertices vertices
--------
Comment. Description:
"#" [ string ]
Format:
# [ string ]
As soon as a "#" character is detected, the rest of the line is considered
a comment.