💾 Archived View for gemini.bortzmeyer.org › rfc-mirror › rfc2842.txt captured on 2024-07-09 at 01:01:40.
⬅️ Previous capture (2021-11-30)
-=-=-=-=-=-=-
Network Working Group R. Chandra
Request for Comments: 2842 Redback Networks Inc.
Category: Standards Track J. Scudder
cisco Systems
May 2000
Capabilities Advertisement with BGP-4
Status of this Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (2000). All Rights Reserved.
Abstract
Currently BGP-4 [BGP-4] requires that when a BGP speaker receives an
OPEN message with one or more unrecognized Optional Parameters, the
speaker must terminate BGP peering. This complicates introduction of
new capabilities in BGP.
This document defines new Optional Parameter, called Capabilities,
that is expected to facilitate introduction of new capabilities in
BGP by providing graceful capability advertisement without requiring
that BGP peering be terminated.
1. Overview of Operations
When a BGP speaker that supports capabilities advertisement sends an
OPEN message to its BGP peer, the message may include an Optional
Parameter, called Capabilities. The parameter lists the capabilities
supported by the speaker.
A BGP speaker determines the capabilities supported by its peer by
examining the list of capabilities present in the Capabilities
Optional Parameter carried by the OPEN message that the speaker
receives from the peer.
A BGP speaker that supports a particular capability may use this
capability with its peer after the speaker determines (as described
above) that the peer supports this capability.
Chandra & Scudder Standards Track [Page 1]
RFC 2842 Capabilities Advertisement with BGP-4 May 2000
A BGP speaker determines that its peer doesn't support capabilities
advertisement, if in response to an OPEN message that carries the
Capabilities Optional Parameter, the speaker receives a NOTIFICATION
message with the Error Subcode set to Unsupported Optional Parameter.
In this case the speaker should attempt to re-establish a BGP
connection with the peer without sending to the peer the Capabilities
Optional Parameter.
If a BGP speaker that supports a certain capability determines that
its peer doesn't support this capability, the speaker may send a
NOTIFICATION message to the peer, and terminate peering. The Error
Subcode in the message is set to Unsupported Capability. The message
should contain the capability (capabilities) that causes the speaker
to send the message. The decision to send the message and terminate
peering is local to the speaker. Such peering should not be re-
established automatically.
2. Capabilities Optional Parameter (Parameter Type 2):
This is an Optional Parameter that is used by a BGP speaker to convey
to its BGP peer the list of capabilities supported by the speaker.
The parameter contains one or more triples <Capability Code,
Capability Length, Capability Value>, where each triple is encoded as
shown below:
+------------------------------+
| Capability Code (1 octet) |
+------------------------------+
| Capability Length (1 octet) |
+------------------------------+
| Capability Value (variable) |
+------------------------------+
The use and meaning of these fields are as follows:
Capability Code:
Capability Code is a one octet field that unambiguously
identifies individual capabilities.
Capability Length:
Capability Length is a one octet field that contains the length
of the Capability Value field in octets.
Chandra & Scudder Standards Track [Page 2]
RFC 2842 Capabilities Advertisement with BGP-4 May 2000
Capability Value:
Capability Value is a variable length field that is interpreted
according to the value of the Capability Code field.
A particular capability, as identified by its Capability Code, may
occur more than once within the Optional Parameter.
3. Extensions to Error Handling
This document defines new Error Subcode - Unsupported Capability.
The value of this Subcode is 7. The Data field in the NOTIFICATION
message lists the set of capabilities that cause the speaker to send
the message. Each such capability is encoded the same way as it was
encoded in the received OPEN message.
4. IANA Considerations
Section 4 defines a Capability Optional Parameter along with an
Capability Code field. IANA is expected to create and maintain the
registry for Capability Code values. Capability Code value 0 is
reserved. Capability Code values 1 through 63 are to be assigned by
IANA using the "IETF Consensus" policy defined in RFC2434. Capability
Code values 64 through 127 are to be assigned by IANA, using the
"First Come First Served" policy defined in RFC2434. Capability Code
values 128 through 255 are for "Private Use" as defined in RFC2434.
5. Security Considerations
This extension to BGP does not change the underlying security issues
inherent in the existing BGP [Heffernan].
6. Acknowledgements
The authors would like to thank members of the IDR Working Group for
their review and comments.
7. References
[BGP-4] Rekhter, Y. and T. Li, "A Border Gateway Protocol 4
(BGP-4)", RFC 1771, March 1995.
[Heffernan] Heffernan, A., "Protection of BGP Sessions via the TCP
MD5 Signature Option", RFC 2385, August 1998.
Chandra & Scudder Standards Track [Page 3]
RFC 2842 Capabilities Advertisement with BGP-4 May 2000
8. Authors' Addresses
Ravi Chandra
Redback Networks Inc.
350, Holger Way
San Jose, CA 95134
EMail: rchandra@redback.com
John G. Scudder
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134
EMail: jgs@cisco.com
Chandra & Scudder Standards Track [Page 4]
RFC 2842 Capabilities Advertisement with BGP-4 May 2000
9. Full Copyright Statement
Copyright (C) The Internet Society (2000). All Rights Reserved.
This document and translations of it may be copied and furnished to
others, and derivative works that comment on or otherwise explain it
or assist in its implementation may be prepared, copied, published
and distributed, in whole or in part, without restriction of any
kind, provided that the above copyright notice and this paragraph are
included on all such copies and derivative works. However, this
document itself may not be modified in any way, such as by removing
the copyright notice or references to the Internet Society or other
Internet organizations, except as needed for the purpose of
developing Internet standards in which case the procedures for
copyrights defined in the Internet Standards process must be
followed, or as required to translate it into languages other than
English.
The limited permissions granted above are perpetual and will not be
revoked by the Internet Society or its successors or assigns.
This document and the information contained herein is provided on an
"AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Acknowledgement
Funding for the RFC Editor function is currently provided by the
Internet Society.
Chandra & Scudder Standards Track [Page 5]