💾 Archived View for siiky.srht.site › wiki › v.chibiakumas.riscv_assembly_programming.gmi captured on 2024-07-09 at 00:28:55. Gemini links have been rewritten to link to archived content

-=-=-=-=-=-=-

ChibiAkumas, "RISC-V Assembly Programming"

siiky

2023/05/05

2023/05/12

video,programming

https://odysee.com/@ChibiAkumas:7/Learn-Risc-V-Assembly-Programming---Lesson1-_-For-absolute-beginners!:c

https://odysee.com/@ChibiAkumas:7/RISC-V-Lesson-2---The-stack-and-conditions:a

https://odysee.com/@ChibiAkumas:7/Risc-V-Assembly-Lesson-3---Bit-ops-and-more-maths!:9

https://yewtu.be/watch?v=bEUMLh2lasE

https://yewtu.be/watch?v=rvhDyJVuAzk

https://yewtu.be/watch?v=mV8HUKxLRxI

Set of videos on RISC-V assembly programming.

https://www.chibialiens.com/riscv

https://www.chibialiens.com/riscv/RiscVCheatsheet.pdf

Instructions

addi dst, src, imm -- add immediate
add dst, src1, src2 -- add
la reg, addr -- load address
lw dst, src -- load word (32bit in a 32bit CPU, 64bit in a 64bit CPU, ...)
lhu dst, src -- load half word unsigned (16bit in a 32bit CPU, 32bit in a 64bit CPU, ...); top half is filled with 0s
lh dst, src -- load half word (16bit in a 32bit CPU, 32bit in a 64bit CPU, ...); top half is filled with bit 15/31 (in a 32/64bit CPU, resp.), which keeps the sign
lbu dst, src -- load byte unsigned; top half is filled with 0s
lb dst, src -- load byte; top half is filled with bit 7, which keeps the sign
sw src, dst -- store word
sh src, dst -- store half word
sb src, dst -- store byte
j lbl -- jump to label
jr reg -- jump to address stored in reg
jal lbl -- jump and link to label
jalr reg -- jump and link to address stored in reg
ret -- return from procedure
mv dst, src -- move
li reg, imm -- load immediate
beq reg1, reg2, lbl -- branch equal
bne reg1, reg2, lbl -- branch not equal
bltu reg1, reg2, lbl -- branch lesser-than unsigned
bgtu reg1, reg2, lbl -- branch greater-than unsigned
bleu reg1, reg2, lbl -- branch lesser-or-equal unsigned
bgeu reg1, reg2, lbl -- branch greater-or-equal unsigned
blt reg1, reg2, lbl -- branch lesser-than signed
bgt reg1, reg2, lbl -- branch greater-than signed
ble reg1, reg2, lbl -- branch lesser-or-equal signed
bge reg1, reg2, lbl -- branch greater-or-equal signed
beqz reg, lbl -- branch equal zero -- equivalent to beq reg, zero, lbl
bnez reg, lbl -- branch not equal zero -- equivalent to bne reg, zero, lbl
lui reg, imm -- load upper immediate ("upper" part is the top 20 bits)
not dst, src -- binary not, flips all bits
neg dst, src -- negate number, i.e., compute 2's complement
sll dst, src1, src2 -- shift left logical (ignoring sign) -- dst = src1 << src2
srl dst, src1, src2 -- shift right logical (ignoring sign) -- dst = src1 >> src2
sla dst, src1, src2 -- shift left arithmetic (considering sign) -- dst = src1 << src2
sra dst, src1, src2 -- shift right arithmetic (considering sign) -- dst = src1 >> src2
slli dst, src, imm -- shift left logical immediate (ignoring sign) -- dst = src << imm
srli dst, src, imm -- shift right logical immediate (ignoring sign) -- dst = src >> imm
slai dst, src, imm -- shift left arithmetic immediate (considering sign) -- dst = src << imm
srai dst, src, imm -- shift right arithmetic immediate (considering sign) -- dst = src >> imm
sltu dst, src, imm -- set lesser-than unsigned -- dst = src1 < src2
sgt dst, src1, src2 -- set greater-than -- dst = src1 > src2
sgei dst, src, imm -- set greater-than immediate -- dst = src >= imm

Addressing

Immediate -- no special characters or anything: 123, 0, -42, ...
Indirect register -- the register name is surrounded by parens, optionally with an immediate byte offset value to the left: (a2), (a3), 32(a1), ...

Stack

The RISC-V has no instructions to manipulate the stack specifically, one has to load/store and update the sp in two instructions.

Note on load immediate

If I'm understanding this right, because of how instructions are encoded (fixed size? as opposed to variable size as in x86), a "load immediate" instruction can't load a full word in a single "command"(?), because each instruction, including its arguments, is encoded as a word (again, if I'm understanding this right).

Because of that, the li instruction must be decomposed in two (generally I suppose; probably by the assembler). For example (assuming rv32):

li a0, 0xABCD0123

Must be something like:

lhi a0, 0x123 # this doesn't actually exist
lui a0, 0xABCD0