💾 Archived View for home.hedy.dev › posts › vim-column-editing.gmi captured on 2024-07-08 at 23:19:04. Gemini links have been rewritten to link to archived content

-=-=-=-=-=-=-

Apr 10, 2024 (updated on Apr 18, 2024)

Vim visual block mode for column editing

The visual block mode in Vim lets you edit text simultaneously across adjacent lines, similar to the "Alt-drag" feature in modern editors, but there's more you can do with it.

One of the basic formatting style that can be done to plain text content would be putting blocks of lines into columns, i.e., from this:

List title 1
- Item 1
- Item 2
- Item 3

List title 2
- Item 1
- Item 2
- Item 3

To this:

List title 1  List title 2
- Item 1      - Item 1
- Item 2      - Item 2
- Item 3      - Item 3

You can easily convert the text in between those two formats just by using visual block mode to do something similar to paste(1) (see the appendix).

Demo video

Creating columns

Let's start with the vertical form, and put your cursor on the position marked by the block (▋)

List title 1
- Item 1
- Item 2
- Item 3

List title 2
- Item 1
- Item 2
▋ Item 3

Begin visual block selection mode with `<C-v>`. Select the first character at each line with `3k`, then extend selection to the entire block using `$h`.

Your cursor should now be on the "2" with the entire "List title 2" and the three list items below it selected:

List title 1
- Item 1
- Item 2
- Item 3

List title ▋
- Item 1
- Item 2
- Item 3

Now hit `x` (or `d`) to remove the block and save it in one of the default registers temporarily.

List title 1
- Item 1
- Item 2
- Item 3

Now, we prepare the first list to be able to paste the second list that was just deleted. Pad spaces at the end of each line of the first list. Spaces will be shown as `_` throughout the example.

If you don't already have Vim/Neovim setup to highlight trailing spaces, you can do so temporarily now by running `:match Underlined '\s\+ `.

List title 1_
- Item 1_____
- Item 2_____
- Item 3_____

Now we can paste the block we've deleted! Place your cursor on the trailing

space after "List title 1":

List title 1▋
- Item 1_____
- Item 2_____
- Item 3_____

And hit `p`:

List title 1 List title 2
- Item 1     - Item 1
- Item 2     - Item 2
- Item 3     - Item 3

Voila! The two lists are now merged into two columns side by side.

You can easily adjust the spacing between the columns using visual block mode. Place your cursor on the space in-between the two list titles:

List title 1▋List title 2
- Item 1     - Item 1
- Item 2     - Item 2
- Item 3     - Item 3

Enter visual block mode and select the entire vertical column of spaces:

List title 1▋List title 2
- Item 1    ▋- Item 1
- Item 2    ▋- Item 2
- Item 3    ▋- Item 3

Hit `A` to append text after each selection. Add a few spaces as you see fit, and exit visual block mode (`ESC`).

List title 1    List title 2
- Item 1        - Item 1
- Item 2        - Item 2
- Item 3        - Item 3

Removing columns

Let's transform the text in reverse[^1]. We'll break these two columns up and have them show up one following another vertically like what we've started with. This might be needed when the first or second list becomes too long and you decide to stop having them show up side by side.

[^1]: If you actually just want to reverse the process without any editing in between, you should of course use a few undo commands ;-)

First, place your cursor at the beginning of the third item on the second list.

List title 1    List title 2
- Item 1        - Item 1
- Item 2        - Item 2
- Item 3        ▋ Item 3

We'll use a similar process as before to select the second list with visual block mode. Enter visual block mode with `<C-v>`, hit `3k`, then `$h`.

Now delete the text like before.

Next we'll have to create enough space under the first list for the second list to be pasted. (Note the trailing spaces here are only shown for completeness.)

List title 1____
- Item 1________
- Item 2________
- Item 3________
⏎
⏎
⏎
⏎
⏎

There should be four empty lines after a blank line following the first list.

Place your cursor on the start of the second blank line:

List title 1____
- Item 1________
- Item 2________
- Item 3________
⏎
▋
⏎
⏎
⏎

And hit `p`.

List title 1____
- Item 1________
- Item 2________
- Item 3________
⏎
List title 2
- Item 1
- Item 2
- Item 3

And we're back to the original format.

You can easily remove the trailing spaces on the first list by running the substitution command on a visual selection of the first list.

Use either visual mode or visual line mode to select the first paragraph, then use `:'<,'>s/\s\+$//`.

List title 1
- Item 1
- Item 2
- Item 3

List title 2
- Item 1
- Item 2
- Item 3

That's it!

Visual block mode is just one of the useful tools when formatting plain text and making ascii art. I frequently use the replace mode ("write through") with `R` to overwrite content without breaking up columns.

You can learn more about the visual block mode in Vim in the docs:

:h visual-block

Appendix

Here's an example shell session to demonstrate how you can do the same thing described in the article using the shell built-in `paste(1)`. Again, spaces are represented as `_`.

$ cat > l1.txt
List title 1_
- Item 1_____
- Item 2_____
- Item 3_____
^D

$ cat > l2.txt
List title 2
- Item 1
- Item 2
- Item 3
^D

$ paste -d ' ' l1.txt l2.txt
List title 1  List title 2
- Item 1      - Item 1
- Item 2      - Item 2
- Item 3      - Item 3

As for converting it back, I might opt for awk(1), another scripting language, or just use Vim's visual block mode.

EOF

Reply via email publicly (plain-text only)

Reply via email privately

1055 words · #howto, #terminal

← Gemlog

← Capsule home

Source

View this page on the web

Capsule last rebuilt on 2024-05-01