💾 Archived View for gem.librehacker.com › gemlog › tech › 20220913-0.gmi captured on 2024-06-20 at 12:11:12. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2023-01-29)
-=-=-=-=-=-=-
I've been working on trying to get I²C comms working on Mecrisp Stellaris, using the built-in hardware module. I spent many lunch breaks seemingly going nowhere, because I couldn't get the Trellis LEDs to even turn on, and the signals did not look correct on the scope. After much looking at waveforms, reading the manuals, and inspecting code, I finally realized that the command bit in the IC_DATA_CMD register is 0 for write, and 1 for read, and not the other way around.
With that fix, I was immediately able to get the Trellis LEDs to turn on and to start blinking.
Some blurry proof the Trellis LEDs came on
Here is the first test waveform I got after applying the fix.
The first half is
S 1 1 1 0 0 0 0 0 ACK
which is the START pulse, followed by the 7-bit device address $70, followed by the (now correct) command bit, followed by the acknowledgement bit. Then
0 0 1 0 0 0 0 1 ACK P
which is the command $21 (start Trellis oscillator) followed by the acknowledgement bit, followed by the STOP pulse.
