💾 Archived View for gemini.bortzmeyer.org › rfc-mirror › rfc9005.txt captured on 2024-06-16 at 14:35:39.
⬅️ Previous capture (2021-11-30)
-=-=-=-=-=-=-
Internet Engineering Task Force (IETF) S. Litkowski
Request for Comments: 9005 Cisco Systems, Inc.
Category: Standards Track S. Sivabalan
ISSN: 2070-1721 Ciena
J. Tantsura
Juniper Networks
J. Hardwick
Metaswitch Networks
李呈 (C. Li)
华为技术有限公司 (Huawei Technologies)
March 2021
Path Computation Element Communication Protocol (PCEP) Extension for
Associating Policies and Label Switched Paths (LSPs)
Abstract
This document introduces a simple mechanism to associate policies
with a group of Label Switched Paths (LSPs) via an extension to the
Path Computation Element Communication Protocol (PCEP). The
extension allows a PCEP speaker to advertise to a PCEP peer that a
particular LSP belongs to a particular Policy Association Group
(PAG).
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
https://www.rfc-editor.org/info/rfc9005.
Copyright Notice
Copyright (c) 2021 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction
1.1. Requirements Language
2. Terminology
3. Motivation
3.1. Policy-Based Constraints
4. Overview
5. Policy Association Group
5.1. POLICY-PARAMETERS-TLV
6. Security Considerations
7. IANA Considerations
7.1. ASSOCIATION Object Type Indicators
7.2. PCEP TLV Type Indicators
7.3. PCEP Errors
8. Manageability Considerations
8.1. Control of Function and Policy
8.2. Information and Data Models
8.3. Liveness Detection and Monitoring
8.4. Verifying Correct Operations
8.5. Requirements on Other Protocols
8.6. Impact on Network Operations
9. References
9.1. Normative References
9.2. Informative References
Appendix A. Example of Policy Parameters
Acknowledgments
Contributors
Authors' Addresses
1. Introduction
[RFC5440] describes the Path Computation Element Communication
Protocol (PCEP), which enables the communication between a Path
Computation Client (PCC) and a Path Control Element (PCE) or between
two PCEs based on the PCE architecture [RFC4655]. [RFC5394] provides
additional details on policy within the PCE architecture and also
provides context for the support of PCE policy.
"Path Computation Element Communication Protocol (PCEP) Extensions
for Stateful PCE" ([RFC8231]) describes a set of extensions to PCEP
to enable active control of Multiprotocol Label Switching Traffic
Engineering (MPLS-TE) and Generalized MPLS (GMPLS) tunnels.
[RFC8281] describes the setup and teardown of PCE-initiated LSPs
under the active stateful PCE model without the need for local
configuration on the PCC, thus allowing for a dynamic network.
Currently, the LSPs can either be signaled via Resource Reservation
Protocol Traffic Engineering (RSVP-TE) or segment routed as specified
in [RFC8664].
[RFC8697] introduces a generic mechanism to create a grouping of LSPs
that can then be used to define associations between a set of LSPs
and a set of attributes (such as configuration parameters or
behaviors) and is equally applicable to stateful PCE (active and
passive modes) and stateless PCE.
This document specifies a PCEP extension to associate one or more
LSPs with policies using the generic association mechanism.
A PCEP speaker may want to influence the PCEP peer with respect to
path selection and other policies. This document describes a PCEP
extension to associate policies by creating a Policy Association
Group (PAG) and encoding this association in PCEP messages. The
specification is applicable to both stateful and stateless PCEP
sessions.
Note that the actual policy definition and the associated parameters
are out of scope of this document.
1.1. Requirements Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
2. Terminology
The following terminology is used in this document.
Association parameters: As described in [RFC8697], the combination
of the mandatory fields Association Type, Association ID, and
Association Source in the ASSOCIATION object uniquely identifies
the association group. If the optional TLVs -- Global Association
Source or Extended Association ID -- are included, then they are
included in combination with mandatory fields to uniquely identify
the association group.
Association information: As described in [RFC8697], the ASSOCIATION
object could include other optional TLVs based on the Association
Types that provide "information" related to the association.
LSR: Label Switching Router
MPLS: Multiprotocol Label Switching
PAG: Policy Association Group
PAT: Policy Association Type
PCC: Path Computation Client; any client application requesting a
path computation to be performed by a Path Computation Element.
PCE: Path Computation Element; an entity (component, application, or
network node) that is capable of computing a network path or route
based on a network graph and applying computational constraints.
PCEP: Path Computation Element Communication Protocol
3. Motivation
Paths computed using PCE can be subjected to various policies at both
the PCE and the PCC. For example, in a centralized TE scenario,
network operators may instantiate LSPs and specify policies for
traffic accounting, path monitoring, telemetry, etc., for some LSPs
via the stateful PCE. Similarly, a PCC could request a user-specific
or service-specific policy to be applied at the PCE, such as a
constraints relaxation policy, to meet optimal QoS and resiliency
levels.
PCEP speakers can use the generic mechanism of [RFC8697] to associate
a set of LSPs with a policy, without the need to know the details of
such a policy. This simplifies network operations, avoids frequent
software upgrades, and provides the ability to introduce new policies
more quickly.
PAG Y
{Service-Specific Policy
for constraint
Monitor LSP relaxation}
| |
| PAG X PCReq/PCRpt |
V {Monitor LSP} {PAG Y} V
+-----+ ----------------> +-----+
_ _ _ _ _ _| PCE | | | PCE |
| +-----+ | ----------> +-----+
| PCInitiate/PCUpd | | PCReq/PCRpt
|{PAG X} | | {PAG Y}
| | |
| .-----. | | .-----.
| ( ) | +----+ ( )
| .--( )--. | |PCC1|--.--( )--.
V ( ) | +----+ ( )
+---+ ( ) | ( )
|PCC|----( (G)MPLS network ) +----+ ( (G)MPLS network )
+---+ ( ) |PCC2|------( )
PAG X ( ) +----+ ( )
{Monitor '--( )--' '--( )--'
LSP} ( ) ( )
'-----' '-----'
Case 1: Policy requested by PCE Case 2: Policy requested by
and enforced by PCC PCC and enforced by
PCE
Figure 1: Sample Use Cases for Carrying Policies over PCEP
3.1. Policy-Based Constraints
In the context of a policy-enabled path computation framework
[RFC5394], path computation policies may be applied at a PCC, a PCE,
or both. A Label Switching Router (LSR) with a policy-enabled PCC
can receive:
* A service request via signaling, including over a Network-Network
Interface (NNI) or User-Network Interface (UNI) reference point.
* A configuration request over a management interface to establish a
service.
The PCC may apply user-specific or service-specific policies to
decide how the path selection process should be constrained -- that
is, which constraints, diversities, optimization criteria, and
constraint-relaxation strategies should be applied to increase the
likelihood that the service LSP(s) will be successfully established
and will provide the necessary QoS and resilience against network
failures. The user-specific or service-specific policies are applied
to the PCC and are then passed to the PCE along with the path
computation request in the form of constraints [RFC5394].
The PCEP speaker can use the generic mechanism as per [RFC8697] to
associate a set of LSPs with user-specific or service-specific
policies. This would simplify the path computation message exchanges
in PCEP.
4. Overview
As per [RFC8697], LSPs are associated with other LSPs with which they
interact by adding them to a common association group. Grouping can
also be used to define the association between LSPs and the policies
associated with them. As described in [RFC8697], the association
group is uniquely identified by the combination of the following
fields in the ASSOCIATION object: Association Type, Association ID,
Association Source, and (if present) Global Association Source or
Extended Association ID. This document defines a new Association
Type called "Policy Association" with value 3 based on the generic
ASSOCIATION object. This new Association Type is called "Policy
Association Type" (PAT).
[RFC8697] specifies the mechanism for the capability advertisement of
the Association Types supported by a PCEP speaker by defining an
ASSOC-Type-List TLV to be carried within an OPEN object. This
capability exchange for the PAT MUST be done before using the Policy
Association. Thus, the PCEP speaker MUST include the PAT in the
ASSOC-Type-List TLV and MUST receive the same from the PCEP peer
before using the PAG in PCEP messages.
The Policy Association Type (3) is operator configured (as specified
in [RFC8697]), i.e., the association is created by the operator
manually on the PCEP peers, and an LSP belonging to this association
is conveyed via PCEP messages to the PCEP peer. There is no need to
convey an explicit Operator-configured Association Range, which could
only serve to artificially limit the available Association IDs.
Thus, for the Policy Association Type, the Operator-configured
Association Range MUST NOT be set and MUST be ignored if received.
A PAG can have one or more LSPs. The association parameters
including Association Identifier, Policy Association Type (PAT), as
well as the Association Source IP address are manually configured by
the operator and are used to identify the PAG as described in
[RFC8697]. The Global Association Source and Extended Association ID
MAY also be included.
As per the processing rules specified in Section 6.4 of [RFC8697], if
a PCEP speaker does not support this Policy Association Type, it
would return a PCEP error (PCErr) message with Error-Type 26
"Association Error" and Error-value 1 "Association type is not
supported". The PAG and the policy MUST be configured on the PCEP
peers as per the operator-configured association procedures. All
further processing is as per Section 6.4 of [RFC8697]. If a PCE
speaker receives a PAG in a PCEP message and the Policy Association
information is not configured, it MUST return a PCErr message with
Error-Type 26 "Association Error" and Error-value 4 "Association
unknown".
Associating a particular LSP with multiple policy groups is allowed
from a protocol perspective; however, there is no assurance that the
PCEP speaker will be able to apply multiple policies. If a PCEP
speaker does not support handling of multiple policies for an LSP, it
MUST NOT add the LSP into the association group and MUST return a
PCErr with Error-Type 26 "Association Error" and Error-value 7
"Cannot join the association group".
5. Policy Association Group
Association groups and their memberships are defined using the
ASSOCIATION object defined in [RFC8697]. Two object types for IPv4
and IPv6 are defined. The ASSOCIATION object includes "Association
type" indicating the type of the association group. This document
adds a new Association Type, Policy Association Type (PAT).
PAG may carry optional TLVs including but not limited to:
POLICY-PARAMETERS-TLV:
Used to communicate opaque information useful to applying the
policy, described in Section 5.1.
VENDOR-INFORMATION-TLV:
Used to communicate arbitrary vendor-specific behavioral
information, described in [RFC7470].
5.1. POLICY-PARAMETERS-TLV
The ASSOCIATION object (for PAT) can carry an optional POLICY-
PARAMETERS-TLV with opaque information that is needed to apply the
policy at the PCEP peer. In some cases, to apply a PCE policy
successfully, it is required to also associate some policy parameters
that need to be evaluated. This TLV is used to carry those policy
parameters. The TLV could include one or more policy-related
parameters. The encoding format and the order MUST be known to the
PCEP peers; this could be done during the configuration of the policy
(and its association parameters) for the PAG. The TLV format is as
per the format of the PCEP TLVs, as defined in [RFC5440] and shown in
Figure 2. Only one POLICY-PARAMETERS-TLV can be carried, and only
the first occurrence is processed. Any others MUST be ignored.
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type=48 | Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| |
// Policy Parameters //
| |
+---------------------------------------------------------------+
Figure 2: The POLICY-PARAMETERS-TLV Format
The POLICY-PARAMETERS-TLV type is 48, and it has a variable length.
The Value field is variable and padded to a 4-byte alignment; padding
is not included in the Length field. The PCEP peer implementation
needs to be aware of the encoding format, order, and meaning of the
policy parameters well in advance based on the policy. Note that
from the protocol point of view, this data is opaque and can be used
to carry parameters in any format understood by the PCEP peers and
associated with the policy. The exact use of this TLV is beyond the
scope of this document. Examples are included for illustration
purposes in Appendix A.
If the PCEP peer is unaware of the policy parameters associated with
the policy and it receives the POLICY-PARAMETERS-TLV, it MUST reject
the PCEP message and send a PCErr message with Error-Type 26
"Association Error" and Error-value 12 "Not expecting policy
parameters". Further, if at least one parameter in the POLICY-
PARAMETERS-TLV received by the PCEP speaker is considered
unacceptable in the context of the associated policy (e.g., out of
range value, badly encoded value, etc.), the PCEP speaker MUST reject
the PCEP message and send a PCErr message with Error-Type 26
"Association Error" and Error-value 13 "Unacceptable policy
parameters".
Note that the vendor-specific behavioral information is encoded in
the VENDOR-INFORMATION-TLV, which can be used along with this TLV.
6. Security Considerations
The security considerations described in [RFC8697], [RFC8231],
[RFC5394], and [RFC5440] apply to the extensions described in this
document as well. In particular, a malicious PCEP speaker could be
spoofed and used as an attack vector by creating spurious Policy
Associations as described in [RFC8697]. Further, as described in
[RFC8697], a spurious LSP can have policies that are inconsistent
with those of the legitimate LSPs of the group and, thus, cause
problems in the handling of the policy for the legitimate LSPs. It
should be noted that Policy Association could provide an adversary
with the opportunity to eavesdrop on the relationship between the
LSPs. [RFC8697] suggests that the implementations and operators use
indirect values as a way to hide any sensitive business
relationships. Thus, securing the PCEP session using Transport Layer
Security (TLS) [RFC8253], as per the recommendations and best current
practices in BCP 195 [RFC7525], is RECOMMENDED.
Further, extra care needs to be taken by the implementation with
respect to the POLICY-PARAMETERS-TLV while decoding, verifying, and
applying these policy variables. This TLV parsing could be exploited
by an attacker; thus, extra care must be taken while configuring a
Policy Association that uses the POLICY-PARAMETERS-TLV and making
sure that the data is easy to parse and verify before use. Ensuring
agreement among all relevant PCEP peers as to the format and layout
of the policy parameters information is key for correct operations.
Note that the parser for POLICY-PARAMETERS-TLV is particularly
sensitive since it is opaque to PCEP and can be used to convey data
with many different internal structures/formats. The choice of
decoder is dependent on the additional metadata associated with the
policy; thus, additional risk of using a wrong decoder and getting
garbage results is incurred. Using standard and well-known policy
formats could help alleviate those risks.
7. IANA Considerations
7.1. ASSOCIATION Object Type Indicators
This document defines a new Association Type in the subregistry
"ASSOCIATION Type Field" of the "Path Computation Element Protocol
(PCEP) Numbers" registry that was originally defined in [RFC8697].
+=======+====================+===========+
| Value | Name | Reference |
+=======+====================+===========+
| 3 | Policy Association | RFC 9005 |
+-------+--------------------+-----------+
Table 1
7.2. PCEP TLV Type Indicators
The following TLV Type Indicator value has been registered within the
"PCEP TLV Type Indicators" subregistry of the "Path Computation
Element Protocol (PCEP) Numbers" registry.
+=======+=======================+===========+
| Value | Description | Reference |
+=======+=======================+===========+
| 48 | POLICY-PARAMETERS-TLV | RFC 9005 |
+-------+-----------------------+-----------+
Table 2
7.3. PCEP Errors
This document defines new Error-values for Error-Type 26 "Association
Error" defined in [RFC8697]. IANA has allocated new error values
within the "PCEP-ERROR Object Error Types and Values" subregistry of
the "Path Computation Element Protocol (PCEP) Numbers" registry as
follows:
+============+===================+===================+===========+
| Error-Type | Meaning | Error-value | Reference |
+============+===================+===================+===========+
| 26 | Association Error | | [RFC8697] |
+------------+-------------------+-------------------+-----------+
| | | 12: Not expecting | RFC 9005 |
| | | policy parameters | |
+------------+-------------------+-------------------+-----------+
| | | 13: Unacceptable | RFC 9005 |
| | | policy parameters | |
+------------+-------------------+-------------------+-----------+
Table 3
8. Manageability Considerations
8.1. Control of Function and Policy
An operator MUST be allowed to configure the Policy Associations at
PCEP peers and associate them with the LSPs. They MAY also allow
configuration to related policy parameters and provide information on
the encoding format and order to parse the associated POLICY-
PARAMETERS-TLV.
8.2. Information and Data Models
[RFC7420] describes the PCEP MIB; there are no new MIB objects for
this document.
The PCEP YANG module is defined in [PCE-PCEP-YANG]. That module
supports associations as defined in [RFC8697]; thus, it supports the
Policy Association Groups.
An implementation SHOULD allow the operator to view the PAG
configured. Further implementation SHOULD allow one to view
associations reported by each peer and the current set of LSPs in the
PAG.
8.3. Liveness Detection and Monitoring
The mechanisms defined in this document do not imply any new liveness
detection and monitoring requirements in addition to those already
listed in [RFC5440] and [RFC8231].
8.4. Verifying Correct Operations
Verifying the correct operation of a policy can be performed by
monitoring various parameters as described in [RFC5440] and
[RFC8231]. A PCEP implementation SHOULD provide information on
failed path computation due to applying policy and log error events,
e.g., parsing failure for a POLICY-PARAMETERS-TLV.
8.5. Requirements on Other Protocols
The mechanisms defined in this document do not imply any new
requirements on other protocols.
8.6. Impact on Network Operations
The mechanisms defined in this document do not have any impact on
network operations in addition to those already listed in [RFC5440],
[RFC8231], and [RFC8281].
9. References
9.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC5440] Vasseur, JP., Ed. and JL. Le Roux, Ed., "Path Computation
Element (PCE) Communication Protocol (PCEP)", RFC 5440,
DOI 10.17487/RFC5440, March 2009,
<https://www.rfc-editor.org/info/rfc5440>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[RFC8231] Crabbe, E., Minei, I., Medved, J., and R. Varga, "Path
Computation Element Communication Protocol (PCEP)
Extensions for Stateful PCE", RFC 8231,
DOI 10.17487/RFC8231, September 2017,
<https://www.rfc-editor.org/info/rfc8231>.
[RFC8253] Lopez, D., Gonzalez de Dios, O., Wu, Q., and D. Dhody,
"PCEPS: Usage of TLS to Provide a Secure Transport for the
Path Computation Element Communication Protocol (PCEP)",
RFC 8253, DOI 10.17487/RFC8253, October 2017,
<https://www.rfc-editor.org/info/rfc8253>.
[RFC8697] Minei, I., Crabbe, E., Sivabalan, S., Ananthakrishnan, H.,
Dhody, D., and Y. Tanaka, "Path Computation Element
Communication Protocol (PCEP) Extensions for Establishing
Relationships between Sets of Label Switched Paths
(LSPs)", RFC 8697, DOI 10.17487/RFC8697, January 2020,
<https://www.rfc-editor.org/info/rfc8697>.
9.2. Informative References
[PCE-PCEP-YANG]
Dhody, D., Ed., Hardwick, J., Beeram, V., and J. Tantsura,
"A YANG Data Model for Path Computation Element
Communications Protocol (PCEP)", Work in Progress,
Internet-Draft, draft-ietf-pce-pcep-yang-16, 22 February
2021,
<https://tools.ietf.org/html/draft-ietf-pce-pcep-yang-16>.
[RFC4655] Farrel, A., Vasseur, J.-P., and J. Ash, "A Path
Computation Element (PCE)-Based Architecture", RFC 4655,
DOI 10.17487/RFC4655, August 2006,
<https://www.rfc-editor.org/info/rfc4655>.
[RFC5394] Bryskin, I., Papadimitriou, D., Berger, L., and J. Ash,
"Policy-Enabled Path Computation Framework", RFC 5394,
DOI 10.17487/RFC5394, December 2008,
<https://www.rfc-editor.org/info/rfc5394>.
[RFC5905] Mills, D., Martin, J., Ed., Burbank, J., and W. Kasch,
"Network Time Protocol Version 4: Protocol and Algorithms
Specification", RFC 5905, DOI 10.17487/RFC5905, June 2010,
<https://www.rfc-editor.org/info/rfc5905>.
[RFC7420] Koushik, A., Stephan, E., Zhao, Q., King, D., and J.
Hardwick, "Path Computation Element Communication Protocol
(PCEP) Management Information Base (MIB) Module",
RFC 7420, DOI 10.17487/RFC7420, December 2014,
<https://www.rfc-editor.org/info/rfc7420>.
[RFC7470] Zhang, F. and A. Farrel, "Conveying Vendor-Specific
Constraints in the Path Computation Element Communication
Protocol", RFC 7470, DOI 10.17487/RFC7470, March 2015,
<https://www.rfc-editor.org/info/rfc7470>.
[RFC7525] Sheffer, Y., Holz, R., and P. Saint-Andre,
"Recommendations for Secure Use of Transport Layer
Security (TLS) and Datagram Transport Layer Security
(DTLS)", BCP 195, RFC 7525, DOI 10.17487/RFC7525, May
2015, <https://www.rfc-editor.org/info/rfc7525>.
[RFC8281] Crabbe, E., Minei, I., Sivabalan, S., and R. Varga, "Path
Computation Element Communication Protocol (PCEP)
Extensions for PCE-Initiated LSP Setup in a Stateful PCE
Model", RFC 8281, DOI 10.17487/RFC8281, December 2017,
<https://www.rfc-editor.org/info/rfc8281>.
[RFC8664] Sivabalan, S., Filsfils, C., Tantsura, J., Henderickx, W.,
and J. Hardwick, "Path Computation Element Communication
Protocol (PCEP) Extensions for Segment Routing", RFC 8664,
DOI 10.17487/RFC8664, December 2019,
<https://www.rfc-editor.org/info/rfc8664>.
Appendix A. Example of Policy Parameters
An example could be a monitoring and telemetry policy, P1, that is
dependent on a profile (GOLD/SILVER/BRONZE) as set by the operator.
The PCEP peers need to be aware of policy P1 (and its associated
characteristics) in advance as well the fact that the policy
parameter will encode the profile of a type string in the POLICY-
PARAMETERS-TLV. As an example, LSP1 could encode the PAG with the
POLICY-PARAMETERS-TLV using the string "GOLD".
The following is another example where the path computation at the
PCE could be dependent on when the LSP was configured at the PCC.
For such a policy, P2, the timestamp can be encoded in the POLICY-
PARAMETERS-TLV, and the exact encoding could be the 64-bit timestamp
format as defined in [RFC5905].
While the above example has a single field in the POLICY-PARAMETERS-
TLV, it is possible to include multiple fields, but the exact order,
encoding format, and meanings need to be known in advance at the PCEP
peers.
Acknowledgments
We would like to acknowledge and thank Santiago Alvarez, Zafar Ali,
Luis Tomotaki, Victor Lopez, Rob Shakir, and Clarence Filsfils for
working on earlier draft versions with similar motivation.
Special thanks to the authors of [RFC8697]. This document borrowed
some of its text. The authors would like to thank Aijun Wang, Peng
Shuping, and Gyan Mishra for their useful comments.
Thanks to Hariharan Ananthakrishnan for shepherding this document.
Thanks to Deborah Brungard for providing comments and being the
responsible AD for this document.
Thanks to Nic Leymann for the RTGDIR review.
Thanks to Benjamin Kaduk and Murray Kucherawy for their comments
during the IESG review.
Contributors
The following individuals have contributed extensively:
Mahendra Singh Negi
RtBrick Inc
N-17L, 18th Cross Rd, HSR Layout
Bangalore 560102
Karnataka
India
Email: mahend.ietf@gmail.com
Dhruv Dhody
Huawei Technologies
Divyashree Techno Park, Whitefield
Bangalore 560066
Karnataka
India
Email: dhruv.ietf@gmail.com
The following individuals have contributed text that was
incorporated:
Qin Wu
Huawei Technologies
101 Software Avenue, Yuhua District
Nanjing
Jiangsu, 210012
China
Email: sunseawq@huawei.com
Xian Zhang
Huawei Technologies
Bantian, Longgang District
Shenzhen
518129
China
Email: zhang.xian@huawei.com
Udayasree Palle
Email: udayasreereddy@gmail.com
Mike Koldychev
Cisco Systems, Inc.
Canada
Email: mkoldych@cisco.com
Authors' Addresses
Stephane Litkowski
Cisco Systems, Inc.
11 Rue Camille Desmoulins
92130 Issy-les-Moulineaux
France
Email: slitkows@cisco.com
Siva Sivabalan
Ciena
385 Terry Fox Drive
Kanata Ontario K2K 0L1
Canada
Email: msiva282@gmail.com
Jeff Tantsura
Juniper Networks
Email: jefftant.ietf@gmail.com
Jonathan Hardwick
Metaswitch Networks
33 Genotin Road
Enfield
United Kingdom
Email: Jonathan.Hardwick@metaswitch.com
Cheng Li
Huawei Technologies
Huawei Campus, No. 156 Beiqing Rd.
Beijing
100095
China
Email: c.l@huawei.com
Additional contact information:
李呈
中国
100095
北京
华为北研所
华为技术有限公司