💾 Archived View for 9til.de › fqa › fqa6.gmi captured on 2024-05-26 at 14:45:05. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2021-11-30)
-=-=-=-=-=-=-
FQA INDEX | FQA 5 - Building The System From Source | FQA 7 - System Management
FQA 5 - Building The System From Source
[‡ networking]
Plan 9’s approach to networking is unusual: most operations comprise reading and writing ("composing") byte streams ("files"). For the bulk of this document, it helps if you have read and at least partially understood FQA 0.1 - What is Plan 9?
Next, read: The Organization of Networks in Plan 9
If you are working with applications such as web servers, FTP servers, and mail servers, you may benefit greatly by reading the RFCs.
http://doc.cat-v.org/plan_9/4th_edition/papers/net/
Note: A script for downloading all the RFCs is located in /lib/rfc/grabrfc. It copies the files into /lib/rfc/, and it may take hours for the script to run to completion.
https://code.9front.org/hg/plan9front/file/9ad06889a5d1/lib/rfc/grabrfc
Basic networking is initially configured by the installation process. However, more complex settings or services may be desired. In Plan 9, network configuration is organized in ndb, the network database.
From ndb(6):
The network database consists of files describing machines known to the local installation and machines known publicly. The files comprise multi-line tuples made up of attribute/value pairs of the form attr=value or sometimes just attr. Each line starting without white space starts a new tuple. Lines starting with # are comments.
The file /lib/ndb/local is the root of the database. Other files are included in the database if a tuple with an attribute-value pair of attribute database and no value exists in /lib/ndb/local. Within the database tuple, each pair with attribute file identifies a file to be included in the database. The files are searched in the order they appear. For example:
database= file=/lib/ndb/common file=/lib/ndb/local file=/lib/ndb/global
declares the database to be composed of the three files /lib/ndb/common, /lib/ndb/local, and /lib/ndb/global. By default, /lib/ndb/local is searched before the others. How- ever, /lib/ndb/local may be included in the database to redefine its ordering.
Within tuples, pairs on the same line bind tighter than pairs on different lines.
As mentioned, the installer adds basic information about the machine to the file /lib/ndb/local, based on the questions asked during the installation. This file may be edited to modify or expand the definition of the local network.
Each machine on the network receives a corresponding section in ndb. The host name (hereafter referred to as sysname) is assigned by setting the sys= tuple:
sys=x301
The resulting sysname is used by the /rc/bin/termrc and /rc/bin/cpurc startup scripts, which in turn call upon any additional configuration that may exist in /cfg/$sysname/. (Look at the scripts to see how they deal with /cfg.)
Network interfaces are recognized by their MAC addresses, which are identified to ndb using the ether= tuple:
sys=x301 ether=00226811f7dd
Additional tuples in the same grouping will be used to configure the interface in question.
6.2.2.1 - WiFi
The following sections provide information pertaining to specific chipsets.
Read: plan9.ini(8), FQA Section 3.2 - Known Working Hardware
http://man.9front.org/8/plan9.ini
6.2.2.1.1 - Interfaces
6.2.2.1.1.1 - wavelan
Lucent Wavelan (Orinoco) IEEE 802.11b and compatible PCMCIA cards. Compatible cards include the Dell TrueMobile 1150 and the Linksys Instant Wireless Network PC Card. Port and IRQ defaults are 0x180 and 3 respectively.
These cards take a number of unique options to aid in identifying the card correctly on the 802.11b network. The network may be ad hoc or managed (i.e. use an access point): mode=[adhoc, managed] and defaults to managed. The 802.11b network to attach to (managed mode) or identify as (ad hoc mode), is specified by essid=string and defaults to a null string. The card station name is given by station=string and defaults to Plan 9 STA. The channel to use is given by channel=number where number lies in the range 1 to 16 inclusive; the channel is normally negotiated automatically.
If the card is capable of encryption, the following options may be used: crypt=[off, on] and defaults to on. keyN=string sets the encryption key N (where N is in the range 1 to 4 inclusive) to string; this will also set the transmit key to N (see below). There are two formats for string which depend on the length of the string. If it is exactly 5 or 13 characters long it is assumed to be an alphanumeric key; if it is exactly 10 or 26 characters long the key is assumed to be in hex format (without a leading 0x). The lengths are checked, as is the format of a hex key. txkey=number sets the transmit key to use to be number in the range 1 to 4 inclusive. If it is desired to exclude or include unencrypted packets clear=[off, on] configures reception and defaults to inclusion.
The defaults are intended to match the common case of a managed network with encryption and a typical entry would only require, for example essid=left-armpit key1=afish key2=calledraawaru if the port and IRQ defaults are used. These options may be set after boot by writing to the device’s ctl file using a space as the separator between option and value, e.g. echo ’key2 1d8f65c9a52d83c8e4b43f94af’ >/net/ether0/0/ctl Card-specific power management may be enabled/disabled by pm=[on, off]
6.2.2.1.1.2 - wavelanpci
PCI Ethernet adapters that use the same Wavelan programming interface. Currently the only tested cards are those based on the Intersil Prism 2.5 chipset.
6.2.2.1.1.3 - iwl
Intel Wireless WiFi Link mini PCI-Express adapters require firmware from http://firmware.openbsd.org/firmware/iwn-firmware*.tgz to be present on attach in /lib/firmware or /boot. To select the access point, the essid= and bssid= parameters can be specified at boot or set during runtime like:
http://firmware.openbsd.org/firmware/iwn-firmware*.tgz
echo essid left-armpit >/net/ether1/clone
If both essid= and bssid= are specified, both must match. Scan results appear in the ifstats file and can be read out like:
cat /net/ether1/ifstats
Ad-hoc mode or WEP encryption is currently not supported. To enable WPA/WPA2 encryption, see wpa(8) for details.
6.2.2.1.1.4 - rt2860
Ralink Technology PCI/PCI-Express wireless adapters require firmware from http://firmware.openbsd.org/firmware/ral-firmware*.tgz to be present on attach in /lib/firmware or /boot. See the iwl section above for configuration details.
http://firmware.openbsd.org/firmware/ral-firmware*.tgz
6.2.2.1.1.5 - wpi
Intel PRO Wireless 3945abg PCI/PCI-Express wireless adapters require firmware from http://firmware.openbsd.org/firmware/*/wpi-firmware*.tgz to be present on attach in /lib/firmware or /boot. See the iwl section above for configuration details.
http://firmware.openbsd.org/firmware/*/wpi-firmware*.tgz
6.2.2.1.2 - WPA
WPA1/TKIP and WPA2/CCMP are supported with the use of the wpa(8) command.
Read: wpa(8)
6.2.2.1.3 - WiFi Roaming
A script can be used to dynamically re-associate with available wifi access points:
http://plan9.stanleylieber.com/rc/wifiroam
Example usage:
@{wifiroam attwifi | aux/statusmsg -k wifiroam} &
6.2.2.1.4 - WiFi Debug
For cards that use the wifi layer, debug prints (note: will appear on the console) may be enabled with:
echo debug >'#l0/ether0/clone'
or by adding debug=1 to the interface definition in plan9.ini.
Read: plan9.ini(8)
http://man.9front.org/8/plan9.ini
The ip= tuple is used to associate an IP address with the machine:
sys=x301 ether=00226811f7dd ip=192.168.0.31
If no ip= tuple is present, the boot scripts will attempt to bring up the interface using DHCP (see below).
The default gateway is configured using the ipgw= tuple, usually under an ipnet= section that defines default settings for an entire subnet:
ipnet=9front ip=192.168.0.0 ipmask=255.255.255.0 ipgw=192.168.0.1
but it may also be specified on a per-machine basis:
sys=x301 ether=00226811f7dd ip=192.168.0.31 ipgw=192.168.0.1
Note: Tuples included in the definition of a machine supercede those defined for the network to which the machine belongs.
DNS resolvers may be specified using the dns= tuple, and may be configured for an entire network:
ipnet=9front ip=192.168.0.0 ipmask=255.255.255.0 ipgw=192.168.0.1
dns=192.168.0.1
or on a per-machine basis:
sys=x301 ether=00226811f7dd ip=192.168.0.31 dns=192.168.0.1
These changes will take effect after a reboot. To configure a DNS resolver on the fly, it is possible to manually edit /net/ndb :
ip=192.168.0.31 ipmask=255.255.255.0 ipgw=192.168.0.1
sys=x301
dom=x301.9front
dns=192.168.0.1
Note: /net/ndb is a synthetic file that represents the current operating state. It does not persist across reboots, and is only pre-populated when system networking was configured via DHCP. Changes to a blank /net/ndb file will match on the ip= tuple.
Read: ip(3)
Finally, to turn on debug in dns :
echo -n debug >/net/dns
6.2.5.1 - Caching DNS server
To run a caching DNS server, modify /cfg/$sysname/termrc or /cfg/$sysname/cpurc (whichever is appropriate) to include the following:
ndb/dns -rs
The caching DNS server will be started at boot time.
Next, modify /lib/ndb/local such that the desired machines will use the IP address of the new caching DNS server as their DNS server, either by changing the dns= tuple under the ipnet of the corresponding network or by adding a dns= tuple to the line of each desired machine.
Read: ndb(6) and ndb(8)
6.2.5.2 - DNS authoritative name server
An authoritative domain name record, with associated reverse-lookup and sub-domains, looks like this:
dom=bell-labs.co soa=
refresh=10800 ttl=10800
serial=2012110732
ns=ns5.he.net
ns=ns4.he.net
ns=ns3.he.net
ns=ns2.he.net
ns=nm.iawtp.com
ns=pp.iawtp.com
ns=mars2.iawtp.com
dnsslave=slave.dns.he.net
mb=sl@stanleylieber.com
mx=pp.inri.net pref=5
mx=nm.inri.net pref=10
mx=mars2.inri.net pref=15
txtrr="v=spf1 mx -all"
dom=125.191.107.in-addr.arpa soa=
refresh=3600 ttl=3600
ns=nm.iawtp.com
dom=bell-labs.co ip=107.191.125.208
dom=www.bell-labs.co cname=bell-labs.co
An FQDN may be assigned to an existing machine by adding the dom= tuple to its definition:
sys=x301 dom=x301.bell-labs.co ether=00226811f7dd ip=192.168.0.31
Note: The dnsslave entries specify slave DNS servers that should be notified when the domain changes. The notification service also requires the -n flag:
ndb/dns -nrs
Read: ndb(8)
6.2.5.2.1 - Troubleshooting DNS authoritative name server
An online tool that evaluates the DNS configuration of a given domain name is available at: https://intodns.com
Settings for an entire network subnet may be defined under an ipnet= tuple:
ipnet=9front ip=192.168.0.0 ipmask=255.255.255.0
ipgw=192.168.0.1
auth=192.168.0.2
authdom=9front
fs=192.168.0.3
cpu=192.168.0.4
dns=192.168.0.1
dnsdomain=9front
smtp=192.168.0.4
sys=onoff dom=onoff.9front ip=192.168.0.1
sys=auth dom=auth.9front ether=00d059b6dac8 ip=192.168.0.2
bootf=/386/9bootpxe
sys=cpu dom=cpu.9front ether=001125149137 ip=192.168.0.4
bootf=/386/9bootpxe
sys=fs dom=fs.9front ether=001641360117 ip=192.168.0.3
sys=x301 dom=x301.9front ether=00226811f7dd ip=192.168.0.31
bootf=/386/9bootpxe
6.2.7.1 - NIC
Network interfaces are automatically initialized at boot time. To make a manual change without rebooting, use the ipconfig(8) command:
ip/ipconfig -g 192.168.0.1 ether /net/ether0 \
192.168.0.31 255.255.255.0
6.2.7.2 - cs
To refresh the network database NOW after changing /lib/ndb/local :
echo -n refresh > /net/cs
6.2.7.3 - dns
echo -n refresh > /net/dns
% cat /net/ndb
ip=192.168.0.31 ipmask=255.255.255.0 ipgw=192.168.0.1
sys=x301
dom=x301.9front
auth=192.168.0.2
dns=192.168.0.1
6.2.8.1 - Checking routes
% cat /net/iproute
0.0.0.0 /96 192.168.0.1 4 none -
192.168.0.0 /120 192.168.0.0 4i ifc 0
192.168.0.0 /128 192.168.0.0 4b ifc -
192.168.0.31 /128 192.168.0.31 4u ifc 0
192.168.0.255 /128 192.168.0.255 4b ifc -
255.255.255.255 /128 255.255.255.255 4b ifc 0
6.2.8.1.1 - Adding static routes
Route requests for 192.168.1.0/24 through the gateway 192.168.0.99 (which itself must already be accessible via the existing network configuration):
echo 'add 192.168.1.0 255.255.255.0 192.168.0.99' >/net/iproute
Note: Manual configurations such as this may be added to optional boot scripts created in /cfg/$sysname/.
Read: ip(3)
Read: ip(3)
Read: ip(3)
No.
In /lib/ndb/local, if no ip= tuple is present in the machine’s definition, the boot scripts will attempt to obtain an IP address via DHCP.
To obtain a DHCP lease manually:
ip/ipconfig
Read: ipconfig(8)
http://man.9front.org/8/ipconfig
From dhcpd(8):
Dhcpd runs the BOOTP and DHCP protocols. Clients use these
protocols to obtain configuration information. This infor-
mation comes from attribute/value pairs in the network data-
base (see ndb(6) and ndb(8)). DHCP requests are honored both
for static addresses found in the NDB and for dynamic
addresses listed in the command line. DHCP requests are
honored if either:
- there exists an NDB entry containing both the ethernet
address of the requester and an IP address on the originat-
ing network or subnetwork.
- a free dynamic address exists on the originating network
or subnetwork.
A BOOTP request is honored if all of the following are true:
- there exists an NDB entry containing both the ethernet
address of the requester and an IP address on the originat-
ing network or subnetwork.
- the entry contains a bootf= attribute
- the file in the bootf= attribute is readable.
Dynamic addresses are specified on the command line as a
list of addresses and number pairs. For example,
ip/dhcpd 10.1.1.12 10 10.2.1.70 12
directs dhcpd to return dynamic addresses 10.1.1.12 through
10.1.1.21 inclusive and 10.2.1.70 through 10.2.1.81 inclu-
sive.
Dhcpd maintains a record of all dynamic addresses in the
directory /lib/ndb/dhcp, one file per address. If multiple
servers have access to this common directory, they will cor-
rectly coordinate their actions.
Attributes come from either the NDB entry for the system,
the entry for its subnet, or the entry for its network. The
system entry has precedence, then the subnet, then the net-
work. The NDB attributes used are:
ip the IP address
ipmask the IP mask
ipgw the default IP gateway
dom the domain name of the system
fs the default Plan 9 file server
auth the default Plan 9 authentication server
dns a domain name server
ntp a network time protocol server
time a time server
wins a NETBIOS name server
www a World Wide Web proxy
pop3 a POP3 mail server
smtp an SMTP mail server
bootf the default boot file; see ndb(6)
Dhcpd will answer BOOTP requests only if it has been specif-
ically targeted or if it has read access to the boot file
for the requester. That means that the requester must spec-
ify a boot file in the request or one has to exist in NDB
for dhcpd to answer. Dhcpd will answer all DHCP requests
for which it can associate an IP address with the requester.
To configure a DHCP server on your system:
mkdir /lib/ndb/dhcp
and then modify /cfg/$sysname/cpurc or /cfg/$sysname/termrc (whichever is appropriate) to start dhcpd and tftpd at boot time:
ip/dhcpd
Read: dhcpd(8)
Read: Dailup modem config at the Bell Labs Plan 9 wiki.
Read: bridge(3) and ip(3)
http://man.9front.org/3/bridge
First, read FQA 7.3.3 - Setting up a listener for network connections. The file server should already be running a listener, and an auth server should already be configured and running on the network.
It is possible to boot from local media and then mount the root file system over the network. At the bootargs prompt, type tls (the old tcp boot option will still work but is not recommended because the connection will not be encrypted). At this point, ip/ipconfig will determine network parameters using DHCP. When file (fs) or authentication (auth) server IP addresses could not be determined over DHCP then the boot process will prompt for those. When prompted for a user, enter a valid username and password that has already been configured on the auth server. The machine should then proceed to mount its root file system from the file server.
Note: Values for fs and auth may be added to plan9.ini.
Read: plan9.ini(8)
http://man.9front.org/8/plan9.ini
6.7.1.1 - Passing arguments to ipconfig at the bootargs prompt
When a DHCP server is not available, you may still tcp boot by configuring networking manually at the bootargs prompt. Everything after tcp! is passed as arguments to the ipconfig command.
At the prompt:
bootargs is (tcp, tls, il, local!device) [tcp]
enter something like the following:
tls!-g 192.168.0.1 ether /net/ether0 192.168.0.23 255.255.255.0
where 192.168.0.1 is the gateway, 192.168.0.23 is the static IP address and 255.255.255.0 the subnet mask.
Read: ipconfig(8)
http://man.9front.org/8/ipconfig
It is also possible to PXE boot a system.
On the file server, add the following lines to /cfg/$sysname/cpurc to start dhcpd and tftpd at boot time:
ip/dhcpd
ip/tftpd
Add an entry for tftp under the appropriate ipnet= tuple in /lib/ndb/local :
ipnet=9front ip=192.168.0.0 ipmask=255.255.255.0 ipgw=192.168.0.1
auth=192.168.0.2
authdom=9front
cpu=192.168.0.4
dns=192.168.0.1
dnsdomain=9front
smtp=192.168.0.4
tftp=192.168.0.3
Reboot the file server:
fshalt -r
To configure machines that will PXE boot from the file server, edit /lib/ndb/local on the file server and add a bootf= (boot file) tuple to the line representing each machine:
sys=x301 dom=x301.9front ether=00226811f7dd ip=192.168.0.31
bootf=/386/9bootpxe
For the system x301 we would then create a file /cfg/pxe/00226811f7dd on the file server to serve as its plan9.ini :
bootfile=/386/9pc
bootargs=tls
nobootprompt=tls
auth=192.168.0.2
fs=192.168.0.3
mouseport=ps2intellimouse
monitor=vesa
vgasize=1440x900x32
user=sl
Note: The user= parameter refers to a single username that has been added both to the file server (for file permissions) as well as to the auth server (for network authentication).
If a file matching the remote system’s MAC address is not found under /cfg/pxe/, the file /cfg/pxe/default (if it exists) will be used instead.
Finally, boot the desired remote systems via PXE. When prompted for a user, enter a valid username and password that has already been configured on the auth server. The remote system should now proceed to boot from the file server.
FQA INDEX | FQA 5 - Building The System From Source | FQA 7 - System Management
![[‡ networking]](/kennedy.gemi.dev/archive/cached?url=gemini%3a%2f%2f9til.de%2ffqa%2fnetworking.jpg&t=638523315050000000&raw=False){kind=link}