💾 Archived View for benjaminja.com › log › 2023 › 04 › 29-broke_weather_vane captured on 2024-05-26 at 14:36:17. Gemini links have been rewritten to link to archived content
-=-=-=-=-=-=-
2023-04-29
I am working on my weatherstation project now, and I’m going to finish it for real! Yesterday I was opening up the weather-vane to reverse-engineer the board it has and make sure what I already know is correct.
I was able to get my picture and put it all back together; there was only one problem. The sensor no longer worked! It turns out that when I took the board out of the housing, I also pulled the cable a bit too hard and broke the connection to the board, whoops.
Fixing the board should be pretty easy, I just have to remove what’s left of the wires, and solder the wires back in. To make sure that the wires don’t fall apart again, I decided to use solid core wires and connect the cable to that.
Everything went pretty well until I accidentally ripped one of the pads off the circuit board, whoops. I am just lucky that the pad I pulled off had a simple connection that I could easily bypass.
I was able to fix the sensor just fine. It looks a little silly, but that’s ok. The one thing that I’m more annoyed at than anything else is that I didn’t need to take apart the sensor. I had already done that around 6 years ago, and uploaded it to my wordpress blog.
My blog where I analyzed the weather-vane.
🖼 Back of the repaird weather-vane
🖼 Front of the repaird weather-vane
