💾 Archived View for gemini.ctrl-c.club › ~phoebos › logs › kisslinux-2021-10-12.txt captured on 2024-05-12 at 16:04:09.
⬅️ Previous capture (2021-12-17)
-=-=-=-=-=-=-
[2021-10-12T03:24:23Z] <testuser[m]12> hi [2021-10-12T03:31:04Z] <Hazoune> hello [2021-10-12T03:33:07Z] <testuser[m]12> acheam: I wanted to ask if you still had that gruvbox css you were using months back on your git [2021-10-12T03:33:37Z] <Hazoune> when dylan says "no", we say "maybe" [2021-10-12T03:33:40Z] <Hazoune> loool [2021-10-12T15:52:47Z] <akira01> yo guys [2021-10-12T15:52:59Z] <akira01> anyone use the latest kernel? [2021-10-12T15:55:26Z] <akira01> 1 [2021-10-12T15:55:56Z] <akira01> cause i get black screen after boot kiss fresh install [2021-10-12T16:12:07Z] <alnn> i used rc4 and it's fine [2021-10-12T16:12:10Z] <alnn> 5.15-rc4 [2021-10-12T16:16:34Z] <omanom> what did they change between rc4 and rc5? [2021-10-12T16:17:12Z] <akira01> I tested only with 5.14.11 [2021-10-12T16:17:25Z] <akira01> will compile 5.15-rc5 [2021-10-12T16:17:32Z] <akira01> maybe works maybe not [2021-10-12T16:17:48Z] <akira01> anyway [2021-10-12T16:17:59Z] <akira01> someone use openbsd with amd drivers? [2021-10-12T16:18:27Z] <akira01> i tried to use openbsd but the tearing in xorg cant go away [2021-10-12T16:18:53Z] <akira01> tried tearfree and other options but still tearing [2021-10-12T16:19:00Z] <akira01> maybe is problem with 7.0 [2021-10-12T16:41:27Z] <akira01> Man [2021-10-12T16:41:36Z] <akira01> 5.15-rc5 not works too [2021-10-12T16:41:42Z] <akira01> wtf [2021-10-12T18:25:36Z] <akira01> Nothing works [2021-10-12T18:25:39Z] <akira01> Probably is kiss [2021-10-12T18:33:56Z] <omanom> why is it "probably" kiss? [2021-10-12T18:43:17Z] <akira01> i did the same .config [2021-10-12T18:43:30Z] <akira01> Same kernel that i used [2021-10-12T18:43:32Z] <akira01> 5.14 [2021-10-12T18:43:36Z] <akira01> Run fine with this [2021-10-12T18:43:48Z] <akira01> but now i get a black screen with a fresh install [2021-10-12T18:46:43Z] <omanom> is your bootloader installed correctly? can you boot a different kernel from that same installation? [2021-10-12T18:54:19Z] <akira01> dont think is the bootloader [2021-10-12T18:54:26Z] <akira01> i already have this problem [2021-10-12T18:54:47Z] <akira01> when i tried to change my kernel what is super normal [2021-10-12T18:54:57Z] <akira01> The black screen is is just black [2021-10-12T18:55:05Z] <akira01> kiss still work [2021-10-12T18:55:19Z] <akira01> if i enter in chroot and make a install of wayland [2021-10-12T18:55:24Z] <akira01> and login after [2021-10-12T18:55:29Z] <akira01> it will works [2021-10-12T18:55:42Z] <akira01> the problem is that i cant see the login prompt [2021-10-12T18:55:53Z] <akira01> but if i put the login name and password [2021-10-12T18:55:57Z] <akira01> it will work [2021-10-12T18:56:10Z] <akira01> so it boot alright and decompress kernel [2021-10-12T18:56:18Z] <omanom> do you see any output prior to the black screen? [2021-10-12T18:56:35Z] <akira01> just thart kernel is decompressed [2021-10-12T18:56:44Z] <akira01> The normal init for kernel [2021-10-12T18:57:53Z] <akira01> dont say any panic or any output after [2021-10-12T18:57:58Z] <akira01> but [2021-10-12T18:58:25Z] <akira01> my kernel 5.14 when compiled give me a werror [2021-10-12T18:58:38Z] <akira01> i can send if you wanna see [2021-10-12T18:58:46Z] <omanom> put it on a pastebin site, sure [2021-10-12T19:00:36Z] <omanom> <akira01> but if i put the login name and password it will work ---> does that mean after you log in, a shell prompt appears? so its just the login prompt that doesn't show? [2021-10-12T19:01:04Z] <akira01> the login prompt and busybox init stuff dont show [2021-10-12T19:01:08Z] <akira01> but it works [2021-10-12T19:01:21Z] <omanom> so a shell prompt appears after you log in? [2021-10-12T19:01:31Z] <akira01> not technically [2021-10-12T19:01:33Z] <akira01> i mean [2021-10-12T19:02:00Z] <akira01> if i put a wayland compositor to run after the login [2021-10-12T19:02:01Z] <akira01> i will appear [2021-10-12T19:02:02Z] <akira01> but nothing more than that [2021-10-12T19:02:13Z] <akira01> i can use it normal [2021-10-12T19:02:31Z] <akira01> but not show the login prompt [2021-10-12T19:02:36Z] <omanom> do any keypresses get echoed to screen after you login? [2021-10-12T19:03:08Z] <akira01> dont know [2021-10-12T19:03:17Z] <akira01> When i tested this problem with compositor [2021-10-12T19:03:24Z] <akira01> i have kiss setup [2021-10-12T19:03:29Z] <akira01> now is a fresh install [2021-10-12T19:03:43Z] <akira01> dont have a wayland compositor setup [2021-10-12T19:03:50Z] <akira01> either network [2021-10-12T19:03:56Z] <omanom> you don't need a compositor or network to test that [2021-10-12T19:04:04Z] <akira01> yeah [2021-10-12T19:04:10Z] <akira01> but i can see nothing [2021-10-12T19:04:22Z] <akira01> after login without compositor [2021-10-12T19:04:29Z] <akira01> still nothing [2021-10-12T19:04:38Z] <omanom> so you can't see a shell prompt ($) [2021-10-12T19:04:42Z] <omanom> and no keypresses get echoed [2021-10-12T19:04:54Z] <akira01> yeah [2021-10-12T19:06:17Z] <omanom> what if you did something that prints output, like `kiss u`? do you see anything then? [2021-10-12T19:07:09Z] <akira01> one sec [2021-10-12T19:15:40Z] <akira01> https://termbin.com/uzia [2021-10-12T19:15:49Z] <akira01> my 5.14 kernel show that [2021-10-12T19:15:56Z] <akira01> but 5.15-rc5 dont [2021-10-12T19:16:04Z] <akira01> and about the kiss u [2021-10-12T19:16:58Z] <akira01> nothing [2021-10-12T19:17:07Z] <akira01> i put my password and user name [2021-10-12T19:17:16Z] <akira01> still black [2021-10-12T19:17:18Z] <akira01> and kiss u [2021-10-12T19:17:21Z] <akira01> show nothing [2021-10-12T19:21:54Z] <omanom> what bootloader are you using? can you pass `nomodeset` to your kernel to see if anything shows up then? [2021-10-12T19:22:23Z] <akira01> i using grub [2021-10-12T19:22:50Z] <akira01> tried efistub with my fresh install but always get system busy [2021-10-12T19:29:43Z] <akira01> nomodeset just freeze the [2021-10-12T19:29:48Z] <akira01> The kernel [2021-10-12T19:30:18Z] <akira01> just still in Loading Linux 5.14 [2021-10-12T19:36:18Z] <akira01> think is time to go back to gentoo or arch [2021-10-12T19:37:13Z] <dilyn> omanom: `dmesg` output and your kernel parameters would be useful here [2021-10-12T19:38:02Z] <dilyn> in other news, something about ungoogled-chromium itself is preventing google meet from sharing my screen. all other tests pass just fine, I can share entire screen or a tab in chromium on a webrtc test site, but not with google's sites [2021-10-12T19:38:05Z] <dilyn> so.... fun fun fun [2021-10-12T19:43:02Z] <akira01> https://termbin.com/su27o [2021-10-12T19:43:23Z] <akira01> my .config file [2021-10-12T19:47:29Z] <dilyn> ah sorry not omanom: but akira01: [2021-10-12T19:47:41Z] <akira01> lol [2021-10-12T20:44:15Z] <akira01> dilyn: any idea?