💾 Archived View for uscoffings.net › retro-computing › collection › tandy-2000 › t2k-service.txt captured on 2024-05-12 at 17:04:13.

View Raw

More Information

⬅️ Previous capture (2023-01-29)

-=-=-=-=-=-=-

2000:1 When first powered up video is not synchronized.
SN 728270: PCB DWG 1700261 already has mods

2000:2 Improper power lead dress may cause AC noise.
fixed

2000:3
informational only

2000:4
SN 728270: dealer fixed

2000:5
SN 216807:  MEXICO    8409J good
SN 223908:  HONG KONG 8417  good

2000:6
N/A user usage note

2000:7
SN 728270: seems like PCB already has this mod

2000:8
SN 728270: installed

2000:9
SN 728270: correct PAL is installed

2000:10
SN 216807 is rev A; TODO check floppy drives
SN 223908 is rev B

2000:11
both units already have shielded reset cables

2000:12
SN 906830: verified correct

2000:13
SN 216807:  fixed (resistor added)
SN 223908:  fixed (resistor added)

2000:14
SN 803721:  fixed (jumper wire added and pin cut)

2000:15
fuse is still good

2000:16
Use screws, not nylon plungers, to seat expansion boards.

2000:17
Use screws, not nylon plungers, to seat expansion boards.

2000:18
TODO edge protector has not been installed

2000:19
reseat CPU

2000:20
SN 223908: believed updated

2000:21
SN 728270: Correct PAL installed and jumper modification done

2000:22
SN 223908: ROMs are "boot103" so sufficient

2000:23
TODO

2000:24 Intermittent 'Bad Command Reading Drive C' error.
SN 906830: TODO

2000:25
SN 728270: Possibly NA due do PCB rev

2000:26
SN 803721: Different modification applied, but resistance verifies okay.

2000:27

2000:28

2000:29
SN 728270: Correct chip is installed

2000:30

2000:31
SN 906830: TODO

2000:32
SN 216807: fixed
SN 223908: TODO

2000:33
SN 216807: TODO
SN 223908: TODO

2000:34
SN 803721: correct checksum is installed

2000:35

2000:36
SN 803721: correct checksum is installed

2000:37

2000:38

2000:39
SN 216807: verified correct; C80186-3; S40142
SN 223908: verified correct; C80186-3

2000:40

2000:41

2000:42

2000:43

2000:44

2000:45