💾 Archived View for radia.bortzmeyer.org › rfc-mirror › rfc463.txt captured on 2024-05-10 at 20:52:20.

View Raw

More Information

⬅️ Previous capture (2023-06-14)

-=-=-=-=-=-=-







Network Working Group                                  Abhay K. Bhushan
RFC # 463                                              MIT-DMCG
NIC # 14573                                            February 21, 1973


                  FTP Comments and Response to RFC 430


    Most of the comments in RFC 430 by Bob Braden are useful suggestions
which should be included in the forthcoming official FTP specification.
This RFC represents my response to Braden's comments and other views.
These comments should be useful for the FTP meeting on March 16 at BBN
(announcement warning AAM NIC #14417). The results of the FTP subgroup
meeting held at BBN on January 25 will be published in RFC 4541 (are
published?).

SPECIFIC RESPONSES TO RFC 430.

    Item A1 - I will let Bob Braden handle the "print file" issues (the
    "still" should be removed).

    Item A2 - I agree that concessions are undesirable and should be
    removed unless people cannot "live" without them.

    Item A3 - I strongly support "bit flag coding" for descriptors.
    Other definition improvement suggestions are ok too.

    Item A4 - The diagram was useful. An alternate one is given on page
    17 of RFC 454. I prefer the latter.

    Item A5 -  The FTP may not be privileged enough to alter passwords
    in many Host systems (e.g. Multics). I know that CCN allows changing
    passwords on-line. We can define a format for changing passwords in
    the pass command, but I don't think we can require that all servers
    allow password changing. This is a minor problem that can be easily
    solved.

    Item A6 - Yes, the comment that TYPE should be before BYTE was for
    bad implementations. The server should reject data transfer
    parameters only when the data transfer command is received. The
    order of the parameter-change commands is not important.

    Item A7 - I do agree that NCP's should be fixed.  A 255 (socket
    number) reply should be required at a specific time, and NCP's
    should be able to provide it (this also permits the proposed GSOC
    command). Let us find out at next meeting if there is anyone who
    cannot live with this new requirement.




Bhushan                                                         [Page 1]

RFC 463           FTP Comments and Response to RFC 430     February 1973


    Item A8 - Yes.

    Item B - There are at least two ways to solve the FTP parameter
    encoding problem presented by Bob Braden. One is to allow multiple
    letter in the TYPE command as suggested by Bob and the other is to
    have a new command such as FORM (which could be P or U). Other
    solutions are equally acceptable to me.

    Item C - Our emphasis should be on working protocol as well as
    elegance. I like the proposed GSOC command over the listen.  In fact
    GSOC can be used for all data connection security checking. The 255
    reply should be sent with GSOC only, and the server should use only
    those sockets for data connection.

    Item D - We need more discussion on the issue of site dependent FTP
    parameters. I will put it on the agenda for the forthcoming FTP
    meeting.

FURTHER COMMENTS

    1. The command-reply sequence needs to be tightened in both
    specification and implementations to allow convenient use of FTP by
    programs or "automatons".

    2. A 300 reply greeting upon first connecting to the FTP server
    should be required and not optional. This avoids the programs having
    to wait an arbitrary time for such a greeting before issuing
    commands. Commands may only be sent after the 300 reply is received
    from the server.

    3. RFC 454 needs a discussion of transfer between two FTP servers
    arranged by the user via the LSTN or GSOC commands.

    4. Perhaps we should allow specification of data transfer parameters
    in a single command line (for reasons of efficiency).  A suggested
    format is to have <SP> separate the parameters bunched together in a
    single line (requiring only a single reply).  Consider the following
    sequences:
            STRU F TYPE I BYTE 36 MODE S <CR><LF>
            reply - 200 OK

    5. Further discussion of MAIL and MAIL.file commands seems
    necessary. Perhaps we will get some useful input from the MAIL
    meeting at SRI on February 23, The following issues seem
    particularly relevant to me:
        a) Allowing mail to multiple users. It should be required that
    FTP servers allow this.




Bhushan                                                         [Page 2]

RFC 463           FTP Comments and Response to RFC 430     February 1973


        b) Using NIC idents. FTP servers should accept some standard
    form of user name. This could be NIC idents or last name with
    optional use of initials.
        c) Uniform conventions for who the mail is from, day, time,
    etc., and how the mail is delivered to user. The mail usually gets
    tagged twice or sometimes not tagged at all.  Perhaps we need a
    different mechanism for indicating who the mail is from than
    provided by the USER command.
        d) handling bulk or junk mail (particularly the NIC documents
    that may be sent on-line by the NIC). Perhaps mail.file should put a
    file in user's directory and notify him of the same. The user does
    not see all the junk on his console but can print the file on a
    printer and read that class of mail at his leisure.










       [ This RFC was put into machine readable form for entry ]
       [ into the online RFC archives by Alex McKenzie with    ]
       [ support from GTE, formerly BBN Corp.             9/99 ]

























Bhushan                                                         [Page 3]