💾 Archived View for cfdocs.wetterberg.nu › parameters-section-structure.gemini captured on 2024-05-12 at 15:12:46. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2021-12-03)
-=-=-=-=-=-=-
Use the optional `Parameters` section to customize your templates. Parameters enable you to input custom values to your template each time you create or update a stack.
The following example declares a parameter named `InstanceTypeParameter`. This parameter lets you specify the Amazon EC2 instance type for the stack to use when you create or update the stack.
Note that `InstanceTypeParameter` has a default value of `t2.micro`. This is the value that AWS CloudFormation uses to provision the stack unless another value is provided.
"Parameters" : {
"InstanceTypeParameter" : {
"Type" : "String",
"Default" : "t2.micro",
"AllowedValues" : ["t2.micro", "m1.small", "m1.large"],
"Description" : "Enter t2.micro, m1.small, or m1.large. Default is t2.micro."
}
}
Parameters:
InstanceTypeParameter:
Type: String
Default: t2.micro
AllowedValues:
- t2.micro
- m1.small
- m1.large
Description: Enter t2.micro, m1.small, or m1.large. Default is t2.micro.
You use the `Ref` intrinsic function to reference a parameter, and AWS CloudFormation uses the parameter's value to provision the stack. You can reference parameters from the `Resources` and `Outputs` sections of the same template.
In the following example, the `InstanceType` property of the EC2 instance resource references the `InstanceTypeParameter` parameter value:
"Ec2Instance" : {
"Type" : "AWS::EC2::Instance",
"Properties" : {
"InstanceType" : { "Ref" : "InstanceTypeParameter" },
"ImageId" : "ami-0ff8a91507f77f867"
}
}
Ec2Instance:
Type: AWS::EC2::Instance
Properties:
InstanceType:
Ref: InstanceTypeParameter
ImageId: ami-0ff8a91507f77f867
The following requirements apply when using parameters:
"Parameters" : {
"ParameterLogicalID" : {
"Type" : "DataType",
"ParameterProperty" : "value"
}
}
Parameters:
ParameterLogicalID:
Type: DataType
ParameterProperty: value
`AllowedPattern`
A regular expression that represents the patterns to allow for `String` types. The pattern must match the entire parameter value provided.
`AllowedValues`
An array containing the list of values allowed for the parameter.
`ConstraintDescription`
A string that explains a constraint when the constraint is violated. For example, without a constraint description, a parameter that has an allowed pattern of `[A-Za-z0-9]+` displays the following error message when the user specifies an invalid value:
`Malformed input-Parameter MyParameter must match pattern [A-Za-z0-9]+`
By adding a constraint description, such as *must only contain letters \(uppercase and lowercase\) and numbers*, you can display the following customized error message:
`Malformed input-Parameter MyParameter must only contain uppercase and lowercase letters and numbers`
`Default`
A value of the appropriate type for the template to use if no value is specified when a stack is created. If you define constraints for the parameter, you must specify a value that adheres to those constraints.
`Description`
A string of up to 4000 characters that describes the parameter.
`MaxLength`
An integer value that determines the largest number of characters you want to allow for `String` types.
`MaxValue`
A numeric value that determines the largest numeric value you want to allow for `Number` types.
`MinLength`
An integer value that determines the smallest number of characters you want to allow for `String` types.
`MinValue`
A numeric value that determines the smallest numeric value you want to allow for `Number` types.
`NoEcho`
Whether to mask the parameter value to prevent it from being displayed in the console, command line tools, or API. If you set the `NoEcho` attribute to `true`, CloudFormation returns the parameter value masked as asterisks (*****) for any calls that describe the stack or stack events, except for information stored in the locations specified below.
Using the `NoEcho` attribute does not mask any information stored in the following:
Do not embed credentials in your templates
`Type`
The data type for the parameter (`DataType`).
AWS CloudFormation supports the following parameter types:
`String`
A literal string.
For example, users could specify `"MyUserName"`.
`Number`
An integer or float. AWS CloudFormation validates the parameter value as a number; however, when you use the parameter elsewhere in your template (for example, by using the `Ref` intrinsic function), the parameter value becomes a string.
For example, users could specify `"8888"`.
`List<Number>`
An array of integers or floats that are separated by commas. AWS CloudFormation validates the parameter value as numbers; however, when you use the parameter elsewhere in your template (for example, by using the `Ref` intrinsic function), the parameter value becomes a list of strings.
For example, users could specify `"80,20"`, and a `Ref` would result in `["80","20"]`.
`CommaDelimitedList`
An array of literal strings that are separated by commas. The total number of strings should be one more than the total number of commas. Also, each member string is space trimmed.
For example, users could specify `"test,dev,prod"`, and a `Ref` would result in `["test","dev","prod"]`.
AWS-Specific Parameter Types
AWS values such as Amazon EC2 key pair names and VPC IDs. For more information, see AWS\-specific parameter types.
`SSM` Parameter Types
Parameters that correspond to existing parameters in Systems Manager Parameter Store. You specify a Systems Manager parameter key as the value of the `SSM` parameter, and AWS CloudFormation fetches the latest value from Parameter Store to use for the stack. For more information, see SSM parameter types.
AWS-specific parameter types are helpful in catching invalid values at the start of creating or updating a stack. To specify parameters with AWS-specific types, a template user must enter existing AWS values that are in their AWS account. AWS CloudFormation validates these input values against existing values in the account. For example, with the `AWS::EC2::VPC::Id` parameter type, a user must enter an existing VPC ID that is in the account and region in which they are creating the stack.
If you want to allow template users to enter input values from different AWS accounts, don't define parameters with AWS-specific types; instead, define parameters of type `String` (or `CommaDelimitedList`).
AWS CloudFormation supports the following AWS-specific types:
`AWS::EC2::AvailabilityZone::Name`
An Availability Zone, such as `us-west-2a`.
`AWS::EC2::Image::Id`
An Amazon EC2 image ID, such as `ami-0ff8a91507f77f867`. Note that the AWS CloudFormation console doesn't show a drop-down list of values for this parameter type.
`AWS::EC2::Instance::Id`
An Amazon EC2 instance ID, such as `i-1e731a32`.
`AWS::EC2::KeyPair::KeyName`
An Amazon EC2 key pair name.
`AWS::EC2::SecurityGroup::GroupName`
An EC2-Classic or default VPC security group name, such as `my-sg-abc`.
`AWS::EC2::SecurityGroup::Id`
A security group ID, such as `sg-a123fd85`.
`AWS::EC2::Subnet::Id`
A subnet ID, such as `subnet-123a351e`.
`AWS::EC2::Volume::Id`
An Amazon EBS volume ID, such as `vol-3cdd3f56`.
`AWS::EC2::VPC::Id`
A VPC ID, such as `vpc-a123baa3`.
`AWS::Route53::HostedZone::Id`
An Amazon Route 53 hosted zone ID, such as `Z23YXV4OVPL04A`.
`List<AWS::EC2::AvailabilityZone::Name>`
An array of Availability Zones for a region, such as `us-west-2a, us-west-2b`.
`List<AWS::EC2::Image::Id>`
An array of Amazon EC2 image IDs, such as `ami-0ff8a91507f77f867, ami-0a584ac55a7631c0c`. Note that the AWS CloudFormation console doesn't show a drop-down list of values for this parameter type.
`List<AWS::EC2::Instance::Id>`
An array of Amazon EC2 instance IDs, such as `i-1e731a32, i-1e731a34`.
`List<AWS::EC2::SecurityGroup::GroupName>`
An array of EC2-Classic or default VPC security group names, such as `my-sg-abc, my-sg-def`.
`List<AWS::EC2::SecurityGroup::Id>`
An array of security group IDs, such as `sg-a123fd85, sg-b456fd85`.
`List<AWS::EC2::Subnet::Id>`
An array of subnet IDs, such as `subnet-123a351e, subnet-456b351e`.
`List<AWS::EC2::Volume::Id>`
An array of Amazon EBS volume IDs, such as `vol-3cdd3f56, vol-4cdd3f56`.
`List<AWS::EC2::VPC::Id>`
An array of VPC IDs, such as `vpc-a123baa3, vpc-b456baa3`.
`List<AWS::Route53::HostedZone::Id>`
An array of Amazon Route 53 hosted zone IDs, such as `Z23YXV4OVPL04A, Z23YXV4OVPL04B`.
`SSM` parameter types correspond to existing parameters in Systems Manager Parameter Store. You specify a Systems Manager parameter key as the value of the `SSM` parameter, and AWS CloudFormation fetches the latest value from Parameter Store to use for the stack. For more information about Systems Manager parameters, see Systems Manager Parameter Store in the *AWS Systems Manager User Guide*.
Systems Manager Parameter Store
You can also use the `ssm` or `ssm-secure` dynamic parameter pattern to specify parameter *values* in your template. For more information, see Using dynamic references to specify template values.
Using dynamic references to specify template values
When you create or update stacks and create change sets, AWS CloudFormation uses whatever values exist in Parameter Store at the time the operation is run. If a specified parameter doesn't exist in Parameter Store under the caller's AWS account, AWS CloudFormation returns a validation error.
When you execute a change set, AWS CloudFormation uses the values that are specified in the change set. You should review these values before executing the change set because they might change in Parameter Store between the time that you create the change set and run it.
You can see the *resolved values* for `SSM` parameters on the stack's *Parameters* tab in the console, or by running https://docs.aws.amazon.com/cli/latest/reference/cloudformation/describe-stacks.html or https://docs.aws.amazon.com/cli/latest/reference/cloudformation/describe-change-set.html. These are the values that are currently used in the stack definition for the corresponding Systems Manager parameter keys. Note that these values are set when the stack is created or updated, so they might differ from the latest values in Parameter Store.
If you specify Secure Strings as parameter values using the `ssm-secure` pattern, AWS CloudFormation does not store the Secure String value or display it in the console or in the results of API calls.
https://docs.aws.amazon.com/cli/latest/reference/cloudformation/describe-stacks.html
https://docs.aws.amazon.com/cli/latest/reference/cloudformation/describe-change-set.html
Because the value of an `SSM` parameter is a Systems Manager parameter key, you should be aware of the following behavior:
https://docs.aws.amazon.com/cli/latest/reference/cloudformation/update-stack.html
See SSM Parameter Types for examples that use `SSM` parameter types.
AWS CloudFormation supports the following `SSM` parameter types:
`AWS::SSM::Parameter::Name`
The name of a Systems Manager parameter key.
Use this parameter when you want to pass the parameter key. For example, you can use this type to validate that the parameter exists.
`AWS::SSM::Parameter::Value<String>`
A Systems Manager parameter whose value is a string. This corresponds to the `String` parameter type in Parameter Store.
`AWS::SSM::Parameter::Value<List<String>>` or `AWS::SSM::Parameter::Value<CommaDelimitedList>`
A Systems Manager parameter whose value is a list of strings. This corresponds to the `StringList` parameter type in Parameter Store.
`AWS::SSM::Parameter::Value<AWS-specific parameter type>`
A Systems Manager parameter whose value is an AWS\-specific parameter type. For example, the following specifies the `AWS::EC2::KeyPair::KeyName` type:
`AWS::SSM::Parameter::Value<AWS::EC2::KeyPair::KeyName>`
`AWS::SSM::Parameter::Value<List<AWS-specific parameter type>>`
A Systems Manager parameter whose value is a list of AWS\-specific parameter types. For example, the following specifies a list of `AWS::EC2::KeyPair::KeyName` types:
`AWS::SSM::Parameter::Value<List<AWS::EC2::KeyPair::KeyName>>`
AWS CloudFormation doesn't support the following `SSM` parameter type:
In addition, AWS CloudFormation does not support defining template parameters as `SecureString` Systems Manager parameter types. However, you can specify Secure Strings as parameter *values* for certain resources by using dynamic parameter patterns. For more information, see Using dynamic references to specify template values.
Using dynamic references to specify template values
When you use the AWS CloudFormation console to create or update a stack, the console alphabetically lists input parameters by their logical ID. To override the default ordering, you can use the `AWS::CloudFormation::Interface` metadata key. By grouping and ordering parameters, you make it easier for users to specify parameter values. For example, you could group all VPC-related parameters so that they aren't scattered throughout an alphabetical list.
In the metadata key, you can specify the groups to create, the parameters to include in each group, and the order in which the console shows each parameter within its group. You can also define friendly parameter names so that the console shows descriptive names instead of logical IDs. All parameters that you reference in the metadata key must be declared in the `Parameters` section of the template.
For more information and an example of the `AWS::CloudFormation::Interface` metadata key, see AWS::CloudFormation::Interface.
AWS::CloudFormation::Interface
The following example `Parameters` section declares two parameters. The `DBPort` parameter is of type `Number` with a default of `3306`. The minimum value that can be specified is `1150`, and the maximum value that can be specified is `65535`. The `DBPwd` parameter is of type `String` with no default value. The `NoEcho` property is set to `true` to prevent *describe stack* calls, such as the `aws cloudformation describe-stacks` AWS CLI command, from returning the parameter value. The minimum length that can be specified is `1`, and the maximum length that can be specified is `41`. The pattern allows lowercase and uppercase alphabetic characters and numerals.
"Parameters" : {
"DBPort" : {
"Default" : "3306",
"Description" : "TCP/IP port for the database",
"Type" : "Number",
"MinValue" : "1150",
"MaxValue" : "65535"
},
"DBPwd" : {
"NoEcho" : "true",
"Description" : "The database admin account password",
"Type" : "String",
"MinLength" : "1",
"MaxLength" : "41",
"AllowedPattern" : "^[a-zA-Z0-9]*$"
}
}
Parameters:
DBPort:
Default: 3306
Description: TCP/IP port for the database
Type: Number
MinValue: 1150
MaxValue: 65535
DBPwd:
NoEcho: true
Description: The database admin account password
Type: String
MinLength: 1
MaxLength: 41
AllowedPattern: ^[a-zA-Z0-9]*$
When you use AWS-specific parameter types, a user who uses your template to create or update a stack must specify existing AWS values that are in the user's account and in the region for the current stack. AWS-specific parameter types help ensure that input values for these types exist and are correct before AWS CloudFormation creates or updates any resources. For example, if you use the `AWS::EC2::KeyPair::KeyName` parameter type, AWS CloudFormation validates the input value against users' existing key pair names before it creates any resources, such as Amazon EC2 instances.
If a user uses the AWS Management Console, AWS CloudFormation prepopulates AWS\-specific parameter types with valid values. That way the user doesn't have to remember and correctly enter a specific name or ID. They would just select one or more values from a drop-down list. Also, depending on the parameter type, users can search for values by ID, name, or Name tag value. For more information, see Specifying stack name and parameters.
prepopulates AWS-specific parameter types with valid values
Specifying stack name and parameters
The following example declares two parameters with the types `AWS::EC2::KeyPair::KeyName` and `AWS::EC2::Subnet::Id`. These types limit valid values to existing key pair names and subnet IDs. Because the `mySubnetIDs` parameter is specified as a list, a user can specify one or more subnet IDs.
"Parameters" : {
"myKeyPair" : {
"Description" : "Amazon EC2 Key Pair",
"Type" : "AWS::EC2::KeyPair::KeyName"
},
"mySubnetIDs" : {
"Description" : "Subnet IDs",
"Type" : "List<AWS::EC2::Subnet::Id>"
}
}
Parameters:
myKeyPair:
Description: Amazon EC2 Key Pair
Type: "AWS::EC2::KeyPair::KeyName"
mySubnetIDs:
Description: Subnet IDs
Type: "List<AWS::EC2::Subnet::Id>"
Currently, users can't use the AWS CLI or AWS CloudFormation API to view a list of valid values for AWS-specific parameters. However, they can view information about each parameter, such as the parameter type, by using the aws cloudformation get\-template\-summary command or https://docs.aws.amazon.com/AWSCloudFormation/latest/APIReference/API_GetTemplateSummary.html API.
aws cloudformation get-template-summary
https://docs.aws.amazon.com/AWSCloudFormation/latest/APIReference/API_GetTemplateSummary.html
You can use the `CommaDelimitedList` parameter type to specify multiple string values in a single parameter. That way, you can use a single parameter instead of many different parameters to specify multiple values. For example, if you create three different subnets with their own CIDR blocks, you could use three different parameters to specify three different CIDR blocks. But it's simpler just to use a single parameter that takes a list of three CIDR blocks, as shown in the following snippet:
"Parameters" : {
"DbSubnetIpBlocks": {
"Description": "Comma-delimited list of three CIDR blocks",
"Type": "CommaDelimitedList",
"Default": "10.0.48.0/24, 10.0.112.0/24, 10.0.176.0/24"
}
}
Parameters:
DbSubnetIpBlocks:
Description: "Comma-delimited list of three CIDR blocks"
Type: CommaDelimitedList
Default: "10.0.48.0/24, 10.0.112.0/24, 10.0.176.0/24"
To refer to a specific value in a list, use the `Fn::Select` intrinsic function in the `Resources` section of your template. You pass the index value of the object that you want and a list of objects, as shown in the following snippet:
"DbSubnet1" : {
"Type" : "AWS::EC2::Subnet",
"Properties" : {
"AvailabilityZone" : {"Fn::Join" : ["",[ { "Ref" : "AWS::Region" }, { "Fn::Select" : [ "0", {"Ref" : "VpcAzs"} ] } ] ]} ,
"VpcId" : { "Ref" : "VPC" },
"CidrBlock" : { "Fn::Select" : [ "0", {"Ref" : "DbSubnetIpBlocks"} ] }
}
},
"DbSubnet2" : {
"Type" : "AWS::EC2::Subnet",
"Properties" : {
"AvailabilityZone" : {"Fn::Join" : ["",[ { "Ref" : "AWS::Region" }, { "Fn::Select" : [ "1", {"Ref" : "VpcAzs"} ] } ] ]} ,
"VpcId" : { "Ref" : "VPC" },
"CidrBlock" : { "Fn::Select" : [ "1", {"Ref" : "DbSubnetIpBlocks"} ] }
}
},
"DbSubnet3" : {
"Type" : "AWS::EC2::Subnet",
"Properties" : {
"AvailabilityZone" : {"Fn::Join" : ["",[ { "Ref" : "AWS::Region" }, { "Fn::Select" : [ "2", {"Ref" : "VpcAzs"} ] } ] ]} ,
"VpcId" : { "Ref" : "VPC" },
"CidrBlock" : { "Fn::Select" : [ "2", {"Ref" : "DbSubnetIpBlocks"} ] }
}
}
DbSubnet1:
Type: AWS::EC2::Subnet
Properties:
AvailabilityZone: !Sub
- "${AWS::Region}${AZ}"
- AZ: !Select [0, !Ref VpcAzs]
VpcId: !Ref VPC
CidrBlock: !Select [0, !Ref DbSubnetIpBlocks]
DbSubnet2:
Type: AWS::EC2::Subnet
Properties:
AvailabilityZone: !Sub
- "${AWS::Region}${AZ}"
- AZ: !Select [1, !Ref VpcAzs]
VpcId: !Ref VPC
CidrBlock: !Select [1, !Ref DbSubnetIpBlocks]
DbSubnet3:
Type: AWS::EC2::Subnet
Properties:
AvailabilityZone: !Sub
- "${AWS::Region}${AZ}"
- AZ: !Select [2, !Ref VpcAzs]
VpcId: !Ref VPC
CidrBlock: !Select [2, !Ref DbSubnetIpBlocks]
The following template declares an `AWS::SSM::Parameter::Value<String>` parameter type.
{
"Parameters": {
"InstanceType": {
"Type": "AWS::SSM::Parameter::Value<String>"
}
},
"Resources": {
"Instance": {
"Type": "AWS::EC2::Instance",
"Properties": {
"InstanceType": {
"Ref": "InstanceType"
}
}
}
}
}
Parameters:
InstanceType:
Type: 'AWS::SSM::Parameter::Value<String>'
Resources:
Instance:
Type: 'AWS::EC2::Instance'
Properties:
InstanceType: !Ref InstanceType
The following command creates a stack based on the example template. It provides the Systems Manager parameter key (`myInstanceType`) as the value for the `InstanceType` template parameter. This assumes that the `myInstanceType` parameter exists in Parameter Store under the caller's AWS account.
aws cloudformation create-stack --stack-name S1 --template-body example template --parameters ParameterKey=InstanceType,ParameterValue=myInstanceType
The following template declares an `AWS::SSM::Parameter::Value<AWS::EC2::Image::Id>` parameter type.
{
"Parameters": {
"ImageId": {
"Type": "AWS::SSM::Parameter::Value<AWS::EC2::Image::Id>"
}
},
"Resources": {
"Instance": {
"Type": "AWS::EC2::Instance",
"Properties": {
"ImageId": {
"Ref": "ImageId"
}
}
}
}
}
Parameters:
ImageId:
Type: 'AWS::SSM::Parameter::Value<AWS::EC2::Image::Id>'
Resources:
Instance:
Type: 'AWS::EC2::Instance'
Properties:
ImageId: !Ref ImageId
The following command creates a stack based on the example template. It provides the Systems Manager parameter key (`myLatestAMI`) as the value for the `ImageId` template parameter. This assumes that the `myLatestAMI` parameter exists in Parameter Store under the caller's AWS account.
aws cloudformation create-stack --stack-name S2 --template-body example template --parameters ParameterKey=ImageId,ParameterValue=myLatestAMI