💾 Archived View for gemini.ctrl-c.club › ~phoebos › logs › freenode-kisslinux-2020-08-22.txt captured on 2024-05-10 at 14:34:16.

View Raw

More Information

⬅️ Previous capture (2021-12-17)

-=-=-=-=-=-=-

2020-08-22T02:52:15 #kisslinux <minall> Hello KissLinux community!... I rebuild and updated my whole system and, trying to boot it gives me a screen stuck at 'Starting udev...' How can I debug this?
2020-08-22T03:03:35 #kisslinux <minall> Hello !
2020-08-22T03:13:56 #kisslinux <minall> Is building and installing baseinit all one has to do to install the init system?
2020-08-22T03:15:57 #kisslinux <minall> Ok, The reason my system hanged at 'starting udev', was because aparently, the init system 'baseinit' wasn't installed correctly. When accessing my system in recovery mode, I got the message 'there '
2020-08-22T03:16:58 #kisslinux <minall> there's no init, for this, I mounted my system and builded and installed baseinit again, now my system boots normally
2020-08-22T04:55:22 #kisslinux <micr0> minall o/
2020-08-22T04:56:10 #kisslinux <micr0> i wonder if its worth a high-level "what to expect to install kiss" or like "decisions you will have to make"
2020-08-22T04:58:49 #kisslinux <micr0> boot into a linux distro, choose and partition a hard drive, download and decompress the base system, chroot into the base system, build a kernel, install firmware, choose and install an init system, choose a hostname, setup networking.
2020-08-22T04:59:44 #kisslinux <micr0> then a 'typical post-install'. learn how to find new software, learn how to create new packages. etc...
2020-08-22T12:16:55 #kisslinux <icyphox> Hey folks. Will anyone be interested in taking up maintainence of the gdb package? I have no time ever since I started working full time, heh.
2020-08-22T12:17:56 #kisslinux <icyphox> As a result, I don't get to run KISS either.
2020-08-22T13:32:29 #kisslinux <onodera> does anyone know of a compton alternative if I just want simlpe shadows?
2020-08-22T13:41:22 #kisslinux <plasmoduck> Hi
2020-08-22T13:41:38 #kisslinux <plasmoduck> Is this Linux good? I want to try either kiss or void.
2020-08-22T13:47:15 #kisslinux <mcpcpc[m]> plasmoduck: it’s very good. ;). but initial setup can be tricky for new users that have not configured their own kernel before (IMO).
2020-08-22T13:59:03 #kisslinux <co1ncidence> oh hello everyone
2020-08-22T15:21:32 #kisslinux <himmalerin> why would you ever write you configure script to use bash
2020-08-22T15:25:30 #kisslinux <himmalerin> I really like pngquant for compression but I'm not sure it's worth installing bash
2020-08-22T15:26:11 #kisslinux <j`ey> you could just uninstall bash
2020-08-22T16:01:47 #kisslinux <bjoernfan> Hey. Like the idea of this project. I've been using Debian for the last couple of years, but sometimes I'm nostalgic about gentoo and slack. Gonna try to give this a try soon-ish, hopefully.
2020-08-22T16:05:19 #kisslinux <bjoernfan> Oh, LibreSSL, interesting. I like it.
2020-08-22T20:53:11 #kisslinux <bjoernfan> Found information in the wiki source code about Wayland being possible, and saw the tinyramfs project to enable LUKS. I think those were my main desires to get working. (Screan tearing in X11 was a bit too annoying for me)
2020-08-22T20:54:20 #kisslinux <himmalerin> kiss with wayland user here, if you run into issues I'm happy to try and help out!
2020-08-22T20:54:36 #kisslinux <himmalerin> not guaranteeing any successes though :p
2020-08-22T20:54:56 #kisslinux <bjoernfan> Haha, thanks!
2020-08-22T20:55:06 #kisslinux <bjoernfan> The docs looked very straight forward
2020-08-22T20:55:13 #kisslinux <bjoernfan> The unpublished wiki page that is
2020-08-22T20:56:13 #kisslinux <himmalerin> yeah, it went pretty smoothly for me, other people have had issues though
2020-08-22T20:57:56 #kisslinux <bjoernfan> I think kernel and graphics drivers will be my biggest headache, I'm using a Intel Hades Canyon (a bigger NUC). That, and not having done those low level things like fixing the boot process for a couple of years.
2020-08-22T20:59:22 #kisslinux <himmalerin> mm yeah. The Gentoo wiki was a great help when figuring out what I for the kernel, definitely recommend checking for your hardware there
2020-08-22T21:03:52 #kisslinux <bjoernfan> Yeah, thanks. I'll see if I spend any time on this tomorrow or push it to next weekend
2020-08-22T21:55:30 #kisslinux <onodera> Is there a kiss-orphan that does not list build dependencies?
2020-08-22T22:01:04 #kisslinux <onodera> or is this already the case... im seeing cmake
2020-08-22T22:10:51 #kisslinux <E5ten> illiliti: https://github.com/illiliti/libudev-zero/pull/3 hell yeah