💾 Archived View for mirrors.apple2.org.za › archive › www.textfiles.com › apple › ANATOMY › fnopen.t… captured on 2024-08-19 at 03:02:15.
View Raw
More Information
⬅️ Previous capture (2023-01-29)
-=-=-=-=-=-=-
- ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::*
- *
- OPEN function handler *
- *
- ----------------------------------------------------------------*
- *
- The open function handler (FNOPEN, $AB22) simply tries to *
- locate the named file and read in its first T/S list. If the *
- file does not already exits and if the calling command can *
- legally create a new file, FNOPEN attempts to build a new file *
- description and T/S list. *
- *
- Execution pattern: *
- FNOPEN calls the common open routine (COMNOPEN, $AB28) to *
- do all the dirty work. COMNOPEN first zeroes out the work *
- area and customizes it with volume, drive, slot*16, track, *
- sector size and record length values. If necessary, the *
- record length is defaulted to value of "$0001". *
- GETFNTRY ($B1C9) is called to read in a fresh VTOC and *
- search the directory sectors for the file description entry of *
- the wanted file. (The links to the first directory sector are *
- housed in the VTOC. Each subsequent directory sector contains *
- the link to the next directory sector. The link bytes of the *
- last directtory sector are zeroed out.) *
- Each directory contains up to seven different file *
- descriptions. An example of the data contained in a file *
- description is shown below: *
- FIL1TSTK DS 1 ;Track # of first T/S list for file 1. *
- FIL1TSSC DS 1 ;Sector # of first T/S list for file 1. *
- FIL1TYPE DS 1 ;File type code for file 1. ($00=Text, *
- ;$01=Integer, $02=Applesoft, $04=Binary, *
- ;$08=S-type, $10=Relocatable, $20=A-type *
- ;and $40=B-type.) The hi bit is set on *
- ;locked files. For example, $02=unlocked *
- ;Applesoft and $82=locked Applesoft. *
- FIL1NAME DS 30 ;Name of file 1. If a file name less than *
- ;30 bytes is used, trailing spaces are *
- ;added to the name to fill the buffer. *
- FIL1SIZE DS 2 ;Size of file 1 in terms of the number of *
- ;sectors used. *
- (If a file was deleted, the track # of the first T/S list sec *
- was copied to the last byte position of the name field. The *
- original track # byte (FIL1TSTK) was then overwritten with *
- an #$FF.) *
- As each directory sector is read in, an attempt is made *
- to locate a file description which contains the name of the *
- file wanted. If a (non-deleted) description entry containing *
- the name of the wanted file is located, execution branches to *
- the FILLINWA routine ($ABA6) which is described several *
- paragraphs below. If the named can't be located after *
- searching all the directories, a second search is made to *
- locate the first available space in a directory sector where a *
- new file description can be placed (in case the command can *
- create a new file). SCRNSRCH ($B39D) is used to flag which *
- search is being done (1=first search, 0=second search). If no *
- free space is located, a disk-full error message is printed. *
- If an available space is located, NEWDESCRP ($B2C1) copies *
- the name of the wanted file from the primary file name buffer *
- (PRIMFNBF, $AA75) into the new entry space. A check is then *
- made to see if the command can legally create a new file. The *
- identifying command byte (NDX2CMD, $AA5F) is used to index a *
- table of command attribute bytes (CMDATTRB, $A909) associated *
- with the command. If bit 0 of the first attribute byte *
- associated with the command is clear, a new file cannot be *
- created. The command is subsequently aborted with a file-not- *
- found error message. However if bit 0 is set, execution *
- branches to the CREATNEW routine ($AB64) to generate a new *
- file description and T/S list sector. *
- CREATNEW initializes the file size field in the new *
- description space with a "$0001". ASGNTKSC ($B244) is then *
- called to assign a free sector for the new T/S list sector. *
- If no free sector can be found, a disk-full error message is *
- generated. *
- If a track has not already been assigned to the file, *
- execution branches to the PRPNWTRK routine ($B26A). PRPNWTRK *
- reads in a fresh VTOC and adds the direction (+1, $01 or -1, *
- $FF) to the last used track number. If the resulting track *
- number is too large, the direction is reversed. A legal track *
- number causes execution to branch to the CHK4FREE routine *
- ($B294) to look for a free sector. If no free sector is *
- found, GETNWTRK ($B272) is used to find another track to *
- search. *
- Once a free sector is located, CPYTKMAP ($B2A1) zeroes out *
- the corresponding track map and writes the modified VTOC to *
- the disk. Unfortunately, this routine is over exuberant. *
- Because it zeroes out all the bytes associated with a given *
- track map, an entire track is allocated in the VTOC. (The *
- unneeded sectors are later released when the file is closed.) *
- Eventually, the ASGNTKSC routine is exited at $B264 with *
- ASIGNTRK ($B5F1) and ASIGNSEC ($B5F0) containing the track and *
- sector values of the new T/S list sector. These values are *
- placed in the new file description entry along with the file *
- type code. The directory sector containing the new file *
- description is then updated on the disk. Next, the T/S list *
- buffer is zeored out and written to the disk as the file's *
- first T/S list sector. Bit 7 of the update flag (UPDATFLG, *
- $B5D5) is cleared to signal that the T/S list is up to date. *
- Execution finally branches to the FILLINWA routine ($ABA6) *
- which is common to opening a new or pre-exisiting file. *
- FILLINWA customizes the work area with information from *
- the file description. (The relative sector number of the last *
- sector read or written (RELPREV, $B5E0) is set to "$FFFF". If *
- the command that called FNOPEN later reads data from, or *
- writes data to the disk, this value eventually forces the *
- computer to ignore the data sector currently in memory.) *
- After filling in the work area, the READTS routine ($AF5E) is *
- used to read in a track/sector list sector. Because this *
- routine is entered with the carry clear, the first T/S list is *
- read. (If a new file was just created, a zeroed out T/S list *
- is used. If the calling command later writes information to *
- the disk, the zero bytes are used to signal that a new data *
- sector must be allocated.) FNOPEN is finally exited through *
- the normal file manager exit routine (GOODFMXT, $B37F). *
- *
- ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::*
(AB22)
FNOPEN JSR COMNOPEN ;Open pre-exisitng file or make a new file
;if command allows new files to be created.
* Common open routine.
(AB28)
COMNOPEN JSR ZWRKAREA ;Initialize the work area.
* Zero out the FM work area so it can be customized
* in accordance with the calling function.
* (Although some work bytes may not be subsequently
* altered, don't be lulled into thinking that they
* are not important. Zero values are just as relevant
* as non-zero values.)
* (P.S. Don't confuse FM work area with its image
* (FM work buffer) that is housed in the chain of
* DOS buffers.)
(ABDC)
ZWRKAREA LDA #0
TAX ;Initialize the x-index.
ZEROWRKA STA FMWKAREA,X ;Put a $00 byte in work area.
INX
CPX #45 ;Work area is 45 bytes long.
(ABE5) BNE ZEROWRKA
* Begin customizing work area.
* Get volume, drive, slot & catalog track
* values from the FM parameter list. Put
* drive, slot*16, catalog track and
* complemented volume number in the work area.
(ABE7) LDA VOLFM ;Volume number.
EOR #$FF ;Calculate 1's complement of volume #.
STA VOLWA
LDA DRVFM ;Drive #.
STA DRVWA
LDA SLOTFM ;Get slot #.
ASL ;Calculate slot * 16.
ASL
ASL
ASL
TAX ;Set (x) = slot * 16.
STX SLOT16WA
LDA #$11 ;Normal catalog trk = #17.
STA TRKWA
(AC05) RTS
(AB2B) LDA #1 ;Describe sector length as 256 bytes
(AB2D) STA SECSIZWA+1 ;(in the FM work area).
* Get record length from the FM parameter
* list & put it in the FM work area.
* (Don't allow a zero length. If zero,
* change it to one.)
(AB30) LDX RECLENFM+1
LDA RECLENFM
BNE STRECLEN ;Non-zero record length is ok.
CPX #0
BNE STRECLEN
INX ;Was zero, make it one instead.
STRECLEN STA RECLENWA ;Put length in FM work area.
STX RECLENWA+1
(AB43) JSR GETFNTRY ;Try to find a directory sector for the file.
* Locate or create a file entry in the
* directory buffer.
* Make two searches if necessary:
* - Search1 - try to locate entry with same name as file wanted.
* - Search2 - couldn't locate entry corresponding to file
* wanted so create a new entry in first available
* space in the directory sector.
(B1C9)
GETFNTRY JSR READVTOC ;Read in the VTOC so we can get the link to
;TRKMAPS & to the first directory sector.
* Read the Volume Table of Contents (VTOC).
(AFF7)
READVTOC LDA #1 ;Read opcode for RWTS.
(AFF9) BNE RDWRVTOC ;ALWAYS.
* Code common to read/write VTOC.
(AFFD)
RDWRVTOC LDY ADRVTOC ;Get address of VTOC from the
STY IBBUFP ;FM constants table & designate it
LDY ADRVTOC+1 ;as the I/O buffer in RWTS's IOB.
STY IBBUFP+1
LDX TRKWA ;Enter RWTS driver with (x)/(y) equal
LDY #0 ;to the trk/sec values of the VTOC.
(B00E) JMP RWTSDRVR ;Call driver to read/write the VTOC.
------------
* Read/Write Track/Sector driver.
(B052)
RWTSDRVR .
.
(See dism'bly of RWTS driver using READ.)
.
.
(RTS)
* Point A4L/H at the primary file name buffer.
(B1CC) LDA FNAMBUFM ;Get address of the name buffer from the
STA A4L ;FM parameter list & put it in the A4L/H
LDA FNAMBUFM+1 ;pointer.
(B1D4) STA A4L+1
* Try to find the directory sector with the
* wanted file name. Make two searches if necessary.
* On the first search, try to find a matching name.
* If that doesn't work, do a second search to store
* the description in the first available file
* description field in a directory sector.
(B1D6) LDA #1 ;Initialize the search counter (SCRNSRCH)
SETSRCH STA SCRNSRCH ;in the FM scratch space for two searches.
(B1D8) ;(1 = search1, 0 = search2)
(B1DB) LDA #0 ;Initialize offset of file description from
STA SECNXD1R ;the very first directory sector.
CLC ;(c)=0=signal to read first directory sec.
GETDIRSC INC SECNXD1R ;Kick up offset from first directory.
(B1E1) ;(On first entry, $00 --> $01.)
(B1E4) JSR RDDIRECT ;Go read directory sector into buffer.
* Read a directory sector.
(B011)
RDDIRECT PHP ;Save (c) on stack:
; (c) = 0 = read 1rst directory sector.
; (c) = 1 = read next directory sector.
(B012) JSR PT2DIRBF
* Designate the directory sector buffer
* as I/O buffer in RWTS's IOB.
(B045)
PT2DIRBF LDA ADRDIRBF ;Get addr of direc
STA IBBUFP ;sec buf from the
LDA ADRDIRBF+1 ;FM constants tbl
STA IBBUFP+1 ;& designate it as
(B051) RTS ;as the I/O buffer.
(B015) PLP ;Check if 1rst directory sec or not.
(B016) BCS RDNXTDIR ;Go read next directory sector.
* Read the first directory sector.
* (Carry = 0.)
(B018)
RDFIRDIR LDY FIRDIRSC ;(y)/(x) = trk/sec vals of first directory
LDX FIRDIRTK ;sector (from the VTOC buffer).
(B01E) BNE DODIRRD ;ALWAYS - go read in directory sector.
* Read the next directory sector.
* (Carry = 1.)
(B020)
RDNXTDIR LDX DIRLNKTK ;Get track of next directory sec from the
;link in the current directory sector.
(B023) BNE GETDIRLK ;Link not zeroed out.
SEC ;Link zeroed out - exit with (c) = 1 to
(B026) RTS ;signal there are no more directory secs.
============
(B027)
GETDIRLK LDY DIRLNKSC ;Get sector of next directory sec from the
;link in the current directory sector.
* Call to read in the directory sector.
(B02A)
DODIRRD STX CURDIRTK ;Save trk/sec vals of directory sec that
(B02D) STY CURDIRSC ;we are about to read so they will be
;the current directory sec values for the
;next time around.
(B030) LDA #1 ;Read opcode for RWTS.
(B032) JSR RWTSDRVR ;Call RWTS driver to do the read.
* Read/Write Track/Sector driver.
(B052)
RWTSDRVR .
.
(See dis'mbly of RWTS driver using READ.)
.
.
(RTS)
(B035) CLC ;Link didn't zero out so signal that there
(B036) RTS ;are more directory secs to read & exit.
============
(B1E7) BCS CHNGSRCH ;Link zeroed out, no more directory secs,
;so go switch searches.
(B1E9) LDX #0
CKDIRTRK STX CURDIRNX ;Offset of file description into the current
(B1EB) ;directory sector.
(B1EF) LDA FIL1TSTK,X ;Get track number of first T/S list
;for a particular file from the file
;description entry in the directory sector.
(B1F1) BEQ CHRSRCHA ;If trk=0, no more files in this direc sec.
(B1F3) BMI CHRSRCHB ;Skip deleted file. (When a file is
;deleted, #$FF is put in byte where trk #
;of first T/S list is usually kept.
* Compare the name found in the file
* description entry portion of the
* directory sector with the file name
* wanted. (On entry, A4L/H points at
* the primary file name buffer.)
(B1F5) LDY #0 ;Initialize index to file name buffer.
INX ;Point (x) at the first char position
INX ;in the name field of description entry.
CMPNAMES INX
LDA (A4L),Y ;Get char of name from primary.
CMP FIL1TSTRK,X ;Compare to char in name of description.
BNE DONTMTCH ;Chars (and therefore names) don't match.
INY
CPY #30 ;Done all chars yet (0 to 29)?
BNE CMPNAMES ;Chars matched, branch if more to check.
LDX CURDIRNX ;All chars matched, so names matched.
CLC ;Return with (x) = index to file
(B20A) RTS ;description in current directory sector
============ ;and with (c) = 0 to signal that the
;correct file description was found.
* Advance index to point at the next
* potential file description entry.
(B20B)
DONTMTCH JSR NXPLUS35 ;Names didn't match, so adjust index
;to point at the next entry.
* Add 35 to the offset to point the index
* at the next file description entry.
* (Check to make sure that we don't index
* right off the end of the directory sec.)
(B230)
NXPLUS35 CLC
LDA CURDIRNX
(B234) ADC #35 ;Add 35 to index. (Each file description
;entry is 35 bytes long.)
(B236) TAX ;Check if there is more space for entries
CPX #245 ;in the current directory sector.
(B239) RTS ;Exit with (c) conditioned:
; (c) = 0 = more space in directory.
; (c) = 1 = ran off end of directory.
(B20E) BCC CKDIRTRK ;More potential file descriptions to check
;in this directory sector.
(B210) BCS GETDIRSC ;Go get next directory sector.
------------
* If we just completed the first search,
* go back to do the second search.
(B212)
CHRSRCHA LDY SCRNSRCH ;(1 = search1, 0 = search2)
(B215) BNE SETSRCH ;Go switch to second search.
* If first search, skip deleted files.
* If second search, fall through to store
* the description in the first unused
* space in the directory.
(B217)
CHRSRCHB LDY SCRNSRCH ;(1 = search1, 0 = search2)
(B21A) BNE DONTMTCH
* Couldn't locate the named file in the
* directory description entries, so begin
* creating a new description in the first available
* space in a directory (in case command can
* legally create a new file).
(B21C)
NWDESCRP LDY #0 ;Initialize index to primary file name buffer.
INX ;Set index to first char position in the
INX ;name field of the file description entry
SETNWNAM INX ;space in the directory sector.
LDA (A4L),Y ;Copy char from primary file name buffer
STA FIL1TSTK,X ;to the directory description space.
INY
CPY #30 ;30 chars in name (0 to 29).
BNE SETNWNAM ;Branch if more chars to copy.
LDX CURDIRNX ;Return with (x) = index to file
SEC ;description space in current directory
(B22F) RTS ;sector & with (c)=1 to signal new entry
============ ;was just created.
* If first search, switch to second search.
* If second search, link zeroed out because
* there isn't enough room left on the
* disk for a new entry. Therefore,
* exit with a disk-full error message.
(B23A)
CHNGSRCH LDA #0 ;Used to reset SCRNSRCH if branch
;back to do a second search.
(B23C) LDY SCRNSRCH ;(1 = search1, 0 = search2)
BNE SETSRCH ;Just did search1 so go start seach2.
(B241) JMP DISKFULL ;Even second search was unsuccesful
------------ ;so go handle a disk-full error.
(AB46) BCC FILLINWA ;Branch if found a directory sector with
;name wanted in the file description entry.
* Named file wasn't found in directory,
* so prepare a new file entry in case
* command can legally create a new file.
(AB48) STX CURDIRNX ;Offset to new description entry in
;case want to create a new file.
* Check to see if command can
* legally create a new file.
(AB4B) LDX NDX2CMD ;(x) = index representing command.
(AB4E) LDA CMDATTRB,X ;Get first byte containing description
;of the given command's attributes.
(AB51) LDX CURDIRNX ;(x) = index for new file description
;entry into the directory sector.
(AB54) LSR ;(c) = bit 0 of 1rst attribute byte.
(AB55) BCS CREATNEW ;If (c) = 1, command can create a new file.
* Command can't create a new file.
* See which language we are using and
* exit with the appropriate error msg.
(AB57)
NEWILLGL LDA CONDNFLG ;$00=warmstart, $01=reading, $40=A(RAM),
;$80=coldstart & $C0=integer.
(AB5A) CMP #$C0 ;Integer in ROM?
BNE TOFILNOT ;No.
(AB5E) JMP LNGNOTAV ;Yes - handle language-not-available error.
------------
TOFILNOT JMP FILENOT ;Handle file-not-found error.
(AB61) ------------
* Create a new file.
* - Initialize file size = 1 sector long.
* - Assign sectors for data sectors & update file size.
* - Write updated VTOC to the disk.
* - Put link & update file size in appropriate
* file description area contained in the directory sector.
* - Write the updated VTOC to the disk.
* - Write a new T/S list to the disk.
(AB64)
CREATNEW LDA #0 ;Initialize the file size = 1 sector long
STA FIL1SIZE+1,X ;(cause at first, only starting with a
LDA #1 ;a T/S list sector).
STA FIL1SIZE,X
(AB6E) STX CURDIRNX ;Save byte offset of file description
;into the directory sector.
(AB71) JSR ASGNTKSC ;Find trk/sec values for new file.
* Asign trk(s)/sec(s) for the new file.
*
* Note: This routine usually assigns more
* sectors than are needed. Each time
* a trk with one or more free sectors is
* located, the entire track (or at least
* all of the free sectors left on that
* track) are assigned. The unneeded sectors
* are later released by the CLOSE command.
*
* Note: DOS does not support the allocation
* of track 0 for a file. Instead, track 0 is
* reserved for storing part of the DOS image.
* However, as shown below, track 0 has special
* significance for the following flags:
* ASIGNTRK = trk # being assigned or,
* if it equals 0, then it is a
* signal to get the next track
* to assign from the VTOC.
* TRK0YET = 0 = haven't encountered trk 0 yet.
* = 1 = trk 0 has been encountered.
* (Track 0 is used as a reference point. The first
* time track 0 is encountered, TRK0YET is set to 1.
* The next time track 0 is encountered, the entire
* disk has been searched.)
* Has a track already been assigned for this file?
(B244)
ASGNTKSC LDA ASIGNTRK
(B247) BEQ PRPNWTRK ;Branch if no trk assigned yet.
;(Always take branch the 1rst time we
;"JSR" to here from CREATNEW. However,
;when we later JSR to here, ASIGNTRK = trk
;number for T/S list.)
* A track was already assigned, so now
* see if there are any free sectors which
* we can use on this track.
(B249)
ANYAVAIL DEC ASIGNSEC ;Next sector to be assigned.
(B24C) BMI ASGNWTRK ;If decrement from $00 --> $FF, then there
;aren't any more secs free on this track.
* Check if any secs are free.
(B24E) CLC ;Roll bits in the 4-bytes of ASIGNMAP as a
(B24F) LDX #4 ;unit. Roll them back to their standard
(B251) ;position.
ADJSTMAP ROL ASIGNMAP-1,X ;If (c) = 1, sector assoc with rolled
DEX ;bit position is free to be assigned to
BNE ADJSTMAP ;a new file.
(B257) BCC ANYAVAIL
* Found a free sector.
(B259) INC FILENSEC ;Sector was free, so kick file size up by
BNE XWITHFRE ;one & return with free sector number in
INC FILENSEC+1 ;(a) so it can later be used for the T/S
XWITHFRE LDA ASIGNSEC ;list sector.
(B264) RTS ;(Actually only good exit available.)
=============
* Prepare to assign a new track (cause all
* sectors were assigned on the last track).
(B265)
ASGNWTRK LDA #0 ;Set signal to assign a new trk.
(B267) STA ASIGNTRK
* Continue preparations to assign a new
* track or begin preparations to assign
* the first track.
(B26A)
PRPNWTRK LDA #0
STA TRK0YET ;Signal that not all trks checked yet.
(B26F) JSR READVTOC ;Read in the VTOC to find the next trk to use.
* Read the Volume Table of Contents (VTOC).
(AFF7)
READVTOC LDA #1 ;Read opcode for RWTS.
(AFF9) BNE RDWRVTOC ;ALWAYS.
* Code common to read/write VTOC.
(AFFD)
RDWRVTOC LDY ADRVTOC ;Get address of VTOC from the
STY IBBUFP ;FM constants table & designate it
LDY ADRVTOC+1 ;as the I/O buffer in RWTS's IOB.
STY IBBUFP+1
LDX TRKWA ;Enter RWTS driver with (x)/(y) equal
LDY #0 ;to the trk/sec values of the VTOC.
(B00E) JMP RWTSDRVR ;Call driver to read/write the VTOC.
------------
* Read/Write Track/Sector driver.
(B052)
RWTSDRVR .
.
(See dism'bly of RWTS driver using READ.)
.
.
(RTS)
* Find & re-assign free sectors for the
* next track. Calculate the next trk to
* assign.
(B272)
GETNWTRK CLC
LDA NXTRKUSE ;Get next track to assign.
ADC DRECTION ;Direction (+1/-1) of assignment.
(B279) BEQ CKIFFULL ;If 0, go see if checked all tracks.
* Is track number legal?
(B27B) CMP TKPERDSK ;Number of tracks on disk (from VTOC).
(B27E) BCC CHK4FREE ;Branch if trk number is valid.
* Track number is too large,
* so reverse direction.
(B280) LDA #$FF ;(a) = -1.
(B282) BNE SRCH4TRK ;ALWAYS.
* At track 0, see if checked all tracks.
* If at track 0 for the first time, set
* the flag. If this is the second time
* at track 0, go issue a disk-full error
* message (because we just searched all
* tracks and didn't find any free sectors.
(B284)
CKIFFULL LDA TRK0YET
(B287) BNE TODSKFUL ;Second time - disk full.
* Start the second search.
(B289) LDA #1 ;Set flag to indicate that the pending
(B28B) STA TRK0YET ;search will the second one.
* Start search at catalog track
* plus or minus one.
(B28E)
SRCH4TRK STA DRECTION ;Set the search direction.
CLC ;Begin search one trk away from cat trk.
(B292) ADC #$11
* Check trk's TRKMAP for free sectors.
(B294)
CHK4FREE STA NXTRKUSE
STA ASIGNTRK
TAY ;Irrevlevant.
ASL ;Trk*4 cause 4 bytes/trk in TRKMAP.
ASL
TAY ;Index from the last byte of TRKMAP0.
LDX #4 ;Index to ASIGNMAP.
CLC ;(c)=0, assume no free sectors available.
CPYTKMAP LDA TRKMAP0+3,Y ;Copy byte from TRKMAP to the assignment map.
STA ASIGNMAP-1,X
(B2A7) BEQ NXMAPBYT ;0 = sector used.
* Found a free sector.
(B2A9) SEC ;(c) = 1 = free sector foundl
LDA #0 ;Put 0 in TRKMAP to reassign all eight
(B2AC) STA TRKMAP0+3,Y ;sectors represented by this byte.
;(Remember, only 2 bytes of TRKMAP actually
(B2AF) ;represent secs. The other 2 bytes are duds.)
NXMAPBYT DEY ;Reduce indices to maps.
DEX
(B2B1) BNE CPYTKMAP ;Branch if not done transferring all bytes
;from TRKMAP to ASIGNMAP yet.
* Check if found a free sector.
(B2B3) BCC GETNWTRK ;If (c) = 0, then no free sectors found yet
;so go back to get a new track.
(B2B5) JSR WRITVTOC ;Update the VTOC on the disk.
* Write the Volume Table of Contents (VTOC).
(AFFB)
READVTOC LDA #2 ;Write opcode for RWTS.
* Code common to read/write VTOC.
(AFFD)
RDWRVTOC LDY ADRVTOC ;Get address of VTOC from the
STY IBBUFP ;FM constants table & designate it
LDY ADRVTOC+1 ;as the I/O buffer in RWTS's IOB.
STY IBBUFP+1
LDX TRKWA ;Enter RWTS driver with (x)/(y) equal
LDY #0 ;to the trk/sec values of the VTOC.
(B00E) JMP RWTSDRVR ;Call driver to read/write the VTOC.
------------
* Read/Write Track/Sector driver.
(B052)
RWTSDRVR .
.
(See dism'bly of RWTS driver using WRITE.)
.
.
(RTS)
(B2B8) LDA SECPERTK ;Reset ASIGNSEC with # of secs/trk
STA ASIGNSEC ;(ie. one greater than highest sector #).
(B2BE) BNE ANYAVAIL ;ALWAYS.
-----------
* Go issue a disk-full error message.
TODSKFUL JMP DISKFULL ;Go handle error.
(B2C0) ------------
* Finish setting up parameters
* in the file manager's work area.
* (Don't confuse with work buffer
* located in the chain of DOS buffers.)
(AB74) LDX CURDIRNX ;Offset into directory sec for new description entry.
STA FIL1TSSC,X ;Put sec val in directory sector.
STA FIRTSSEC ;Put sec val of 1rst T/S list sec in FM work area.
STA CURTSSEC ;Put current sector val in FM work area.
LDA ASIGNTRK ;Do the same for the track value.
STA FIL1TSTRK,X
STA FIRSTSTK
STA CURTSTRK
LDA FILTYPFM ;(From FM parm list.)
(AB8F) STA FIL1TYPE,X ;Put file type in file description entry.
* Write directory sector buffer.
(AB92) JSR WRDIRECT ;Write directory sec buf in cat.
* Write the directory buffer.
(B037)
WRDIRECT JSR PT2DIRBF ;Select directory sector buffer.
* Designate the directory sector buffer
* as I/O buffer in RWTS's IOB.
(B045)
PT2DIRBF LDA ADRDIRBF ;Get addr of the directory sector buffer
STA IBBUFP ;from the FM constants table and designate
LDA ADRDIRBF+1 ;it as the I/O buffer.
STA IBBUFP+1
(B051) RTS
(B03A) LDX CURDIRTK ;Enter RWTS driver with (x)/(y) = trk/sec
LDY CURDIRSC ;values of the directory sector.
LDA #2 ;Write opcode for RWTS.
(B042) JMP RWTSDRVR ;Call RWTS driver to write the directory buffer.
-------------
* Read/Write Track/Sector driver.
(B052)
RWTSDRVR .
.
(See dis'mbly of RWTS
driver using WRITE.)
.
.
(RTS)
* Write T/S list sector buffer.
(AB95) JSR SELTSBUF ;Get adr of T/S list sec buf from
;the FM parameter list.
* Point A4L/H at the T/S list sector buffer.
(AF0C)
SELTSBUF LDX #2 ;Index for T/S list buf.
(AF0E) BNE PT2FMBUF ;ALWAYS.
(AF12)
PT2FMBUF LDA WRKBUFFM,X ;Get address of the desired buffer from
STA A4L ;the FM parameter list & put it in the
LDA WRKBUFFM+1,X ;A4L/H pointer.
STA A4L+1
(AF1C) RTS
(AB98) JSR CURBUF ;Zero out the T/S list sector buffer.
* Zero out the current 256-byte buffer.
(B7D6)
ZCURBUF LDA #0
TAY
ZCURBUF1 STA (A4L),Y
INY
BNE ZCURBUF1
(B7DE) RTS
(AB9B) JSR WRITETS ;Write zeroed out T/S list sector buffer.
;NOTE: If the write subfunction is later
;entered to write new data to the disk, the
;zero bytes are detected & used as signals
;that a new data pair should be put in the
;T/S list sector buffer.)
* Write the T/S list buffer.
(AF3A)
WRITETS JSR SETTSIOB ;Prepare RWTS's IOB for WRITING the
;the T/S list buffer.
* Prepare RWTS's IOB for reading
* or writing the T/S list sector.
(AF4B)
SETTSIOB LDA TSBUFFM ;Get adr of the T/S list buf from the FM
STA IBBUFP ;parameter list & designate T/S list buf
LDA TSBUFFM+1 ;as the I/O buffer in RWTS's IOB.
STA IBBUFP+1
LDX CURTSTRK ;Set (x)/(y) = trk/sec of current T/S list.
LDY CURTSSEC
(AF5D) RTS
(AF3D) LDA #2 ;Write opcode for RWTS.
(AF3F) JSR RWTSDRVR ;Call RWTS driver to write the T/S list.
* Read/Write Track/Sector driver.
(B052)
RWTSDRVR .
.
(See dis'mbly of RWTS driver using WRITE.)
.
.
(RTS)
(AF42) LDA #$7F ;Clear bit 7 of the update flag to signal
AND UPDATFLG ;that the T/S list sector is up to date.
STA UPDATFLG
(AF4A) RTS
(AB9E) LDX CURDIRNX ;Offset to new file descrip in directory sec.
LDA #6 ;Default return code value to that for
(ABA3) STA RTNCODFM ;a file-not-found error.
* Fill in the FM work area buffer.
* (Routine common to opening a new
* or pre-existing file.)
(ABA6)
FILLINWA LDA FIL1TSTK,X ;T/S list trk val (from directory sec).
STA FIRSTSTK
LDA FIL1TSSC,X ;T/S list sec val (from directory sec).
STA FIRTSSEC
LDA FIL1TYPE,X ;File type (from directory sec).
STA FILTYPFM
STA FILTYPWA
LDA FIL1SIZE,X ;File size (from directory sec).
STA FILENSEC
LDA FIL1SIZE+1,X
STA FILENSEC+1
STX BYTNXDIR ;Index into directory sec to description.
LDA #$FF ;Pretend that the last data sector used had a
STA RELPREV ;relative sector number (in relation to
(ABCF) STA RELPREV+1 ;the entire file) of #$FFFF. NOTE: This
;value is later used to trick the read and
;write subfunctions into ignoring the data
;sector currently in memory.
(ABD2) LDA MXIN1TSL ;Dictate that a T/S list can only describe $7A
(ABD5) STA MXSCURTS ;(#122) data sectors. Note: This value is later
;used by the read and write subfunctions to decide
;whether or not the T/S list currently in memory
;should be used.
* Read first T/S list sector
* to the T/S list buffer.
(ABD8) CLC ;(c) = 0 = signal 1rst T/S list sector.
(ABD9) JMP READTS ;Go read in the T/S list sector.
------------
* Read T/S list sector.
(AF5E)
READTS PHP ;Save (c) denoting if 1rst T/S list or not.
;(c) = 0 = read 1rst T/S list sec.
;(c) = 1 = read next T/S list sec.
(AF5F) JSR CKTSUPDT ;Write T/S list sec buf if updating is
;required. (If T/S list buf has changed
;since last read or write, then write it
;back to the disk so don't overwrite buf
;and lose information when read the new
;T/S list sector.)
* Check if T/S list requires updating.
* (ie. Has T/S list buf changed since
* the last read or write?)
(AF34)
CKTSUPDT LDA UPDATFLG
BMI WRITETS ;If bit 7 set, updating is required.
(AF39) RTS
===========
* Write the T/S list buffer.
(AF3A)
WRITETS JSR SETTSIOB ;Prepare RWTS's IOB for WRITING the
;the T/S list buffer.
* Prepare RWTS's IOB for reading
* or writing the T/S list sector.
(AF4B)
SETTSIOB LDA TSBUFFM ;Get adr of the T/S list buf from the FM
STA IBBUFP ;parameter list & designate T/S list buf
LDA TSBUFFM+1 ;as the I/O buffer in RWTS's IOB.
STA IBBUFP+1
LDX CURTSTRK ;Set (x)/(y) = trk/sec of current T/S list.
LDY CURTSSEC
(AF5D) RTS
(AF3D) LDA #2 ;Write opcode for RWTS.
(AF3F) JSR RWTSDRVR ;Call RWTS driver to write the T/S list.
* Read/Write Track/Sector driver.
(B052)
RWTSDRVR .
.
(See dis'mbly of RWTS driver using WRITE.)
.
.
(RTS)
(AF42) LDA #$7F ;Clear bit 7 of the update flag to signal
AND UPDATFLG ;that the T/S list sector is up to date.
STA UPDATFLG
(AF4A) RTS
============
(AF62) JSR SETTSIOB ;Prepare RWTS's IOB for READING a T/S list.
* Prepare RWTS's IOB for reading
* or writing the T/S list sector.
(AF4B)
SETTSIOB LDA TSBUFFM ;Get adr of the T/S list buf from the FM
STA IBBUFP ;parameter list & designate T/S list buf
LDA TSBUFFM+1 ;as the I/O buffer in RWTS's IOB.
STA IBBUFP+1
LDX CURTSTRK ;Set (x)/(y) = trk/sec of current T/S list.
LDY CURTSSEC
(AF5D) RTS
(AF65) JSR SELTSBUF ;Select the T/S list buffer.
* Point A4L/H at the T/S list sector buffer.
(AF0C)
SELTSBUF LDX #2 ;Index for T/S list buf.
(AF0E) BNE PT2FMBUF ;ALWAYS.
(AF12)
PT2FMBUF LDA WRKBUFFM,X ;Get address of the desired buffer from
STA A4L ;the FM parameter list & put it in the
LDA WRKBUFFM+1,X ;A4L/H pointer.
STA A4L+1
(AF1C) RTS
(AF68) PLP ;Get saved (c) back from stack.
(AF69) BCS RDNXTTS ;If (c) = 1, already read FIRST T/S list
;sec, so go read next one.
* Read first T/S list sector.
* (Carry was clear.)
(AF6B)
RDFIRSTS LDX FIRSTSTK ;Set (x)/(y)=trk/sec of first T/S list sec.
LDY FIRTSSEC
(AF71) JMP RDTSLST ;Go read T/S list sector into buffer.
------------
* Subroutine to read T/S list sector.
(AFB5)
RDTSLST LDA #1 ;Read opcode for RWTS.
* Code common to read/write T/S list.
(AFB7)
RDWRTS STX CURTSTRK ;New T/S list sector trk/sec values (x)/(y)
STY CURTSSEC ;become current T/S list trk/sec values.
(AFBD) JSR RWTSDRVR ;Call RWTS driver to read/write current T/S
;list.
* Read or write the current T/S list.
(B052)
RWTSDRVR .
.
(See dis'mbly of RWTS driver using READ.)
.
.
(RTS)
* Update the FM work area
* (not in DOS buffer chain).
(AFC0) LDY #5 ;Offset into current T/S list buffer.
LDA (A4L),Y ;Get & save the relative sector number of the
(AFC4) STA RELFIRST ;FIRST data sector that can be described in this
;T/S list. (Always equals $00 when called from FNOPEN.)
(AFC7) CLC ;Add the maximum # of data secs that can described
ADC MXSCURTS ;in this T/S list.
STA RELASTP1 ;Store maximum relative sector number (plus 1) of
INY ;the last data sector that can be described in list.
LDA (A4L),Y
STA RELFIRST+1
ADC MXSCURTS+1
STA RELASTP1+1 ;(RELASTP1/+1 is always set to $007A by FNOPEN.)
CLC ;Return with "no error" signal.
(AFDB) RTS
============
(AB25) JMP GOODFMXT ;Exit cleanly.
------------
- Exit the file manager with or without errors.
(B35F)
LNGNOTAV LDA #1
(B361) BNE BADFMXIT ;ALWAYS.
(B373)
FILENOT LDA #6
(B375) BNE BADFMXIT ;ALWAYS.
(B377)
DISKFULL JMP FULLPTCH ;(See dis'mbly of errors.)
(B37F)
GOODFMXT LDA RTNCODFM
CLC ;(c) = 0 to signal good operation.
BCC FMEXIT
BADFMXIT SEC ;(c) = 1 to signal unsuccessful.
FMEXIT PHP ;Save status on stack.
STA RTNCODFM ;Store return code in FM parameter list.
LDA #0
STA STATUS
(B38E) JSR CPYFMWA ;Copy the work area to the work buffer.
* Copy the FM work area (non-chain) to
* the FM work buffer (in DOS chain).
(AE7E)
CPYFMWA JSR SELWKBUF ;Select the FM work buffer (in DOS chain).
* Point the A4L/H pointer at the FM work buffer.
(AF08)
SELWKBUF LDX #0 ;Set index to select work buffer.
(AF0A) BEQ PT2FMBUF ;ALWAYS.
(AF12)
PT2FMBUF LDA WRKBUFFM,X ;Get address of selected buffer from the
STA A4L ;FM parameter list & put it in the pointer.
LDA WRKBUFFM+1,X
STA A4L+1
(AF1C) RTS
(AE81) LDY #0 ;Initialize index.
STORWRK LDA FMWKAREA,Y ;Get byte from the FM work area.
STA (A4L),Y ;Put it in the work buffer.
INY
CPY #45 ;45 bytes to copy (0 to 44).
BNE STORWRK
(AE8D) RTS
(B391) PLP ;Retrieve status of success of operation
;from the stack.
(B392) LDX STKSAV ;Adjust stack pointer to force exit to the
TXS ;caller of the function (even if we are
(B396) RTS ;presently several subroutines deeper than
============ ;the original entry point). (Returns to
;AFTRFUNC ($A6AB) in the FMDRIVER routine
;($A6A8).)