💾 Archived View for mirrors.apple2.org.za › archive › apple.cabi.net › Utilities › VULCAN.HD.STUFF ›… captured on 2024-05-10 at 15:55:57.
⬅️ Previous capture (2023-05-25)
-=-=-=-=-=-=-
Newsgroups: comp.sys.apple2.marketplace Path: news.weeg.uiowa.edu!news.uiowa.edu!hobbes.physics.uiowa.edu!newsrelay.iastate.edu!vixen.cso.uiuc.edu!howland.reston.ans.net!news.intercon.com!udel!news.sprintlink.net!crash!pro-nsdapple!tomk From: tomk@pro-nsdapple.cts.com (Tom Kelly) Subject: Vulcan Hard Drive Organization: ProLine [pro-nsdapple] - North San Diego Apple Users Group Date: Sat, 29 Jan 1994 21:09:45 GMT Message-ID: <1994Jan29.130945.1772@pro-nsdapple.cts.com> To: comp-sys-apple2-marketplace@crash Sender: news@crash.cts.com (news subsystem) Nntp-Posting-Host: crash.cts.com Lines: 26 I just installed a used Applied Engineering Vulcan in my gs. It is the 40 meg version. I'd like to be sure I have the lasest software and firmware. On the interface card, I have the following: U13 EPROM copyright 1989 Rev VUL1.4GS40 U16 HDC1A.N U1 HDC3B.N U2 HDC2A-N I also have two disks (5.25 and 3.50) both are Version 1.4.2. The control panel says Vulcan 1.2. I have both the Vulcan User's Manual v1.21 and Vulcan User's Manual v1.21 Addendum v1.0. Do I have the "latest and greatest"? If NOT what is the latest and greatest? Is it worth the trouble to "upgrade"? Why would I want to upgrade this setup. I am ONLY considering upgrading the firm/software (NOT NEW HARDWARE). If needed, how can I get the upgrade. I'd like to hear from others who have the same drive. I'd hope they would share their experiences with me. Thanks. ---- ProLine: tomk@pro-nsdapple Internet: tomk@pro-nsdapple.cts.com UUCP: crash!pro-nsdapple!tomk ARPA: crash!pro-nsdapple!tomk@nosc.mil