💾 Archived View for gopher.zcrayfish.soy › 1 › phlog › 20190605-new-old-box captured on 2024-05-10 at 10:58:01. Gemini links have been rewritten to link to archived content

View Raw

More Information

⬅️ Previous capture (2024-03-21)

➡️ Next capture (2024-05-12)

🚧 View Differences

-=-=-=-=-=-=-

----------------------------------------
New/old box
June 05th, 2019
----------------------------------------

On Monday (June 3) I decided to switch from OpenSUSE to Alpine Linux :)
I REALLY appreciate the lack of systemd (and pulseaudio, and Avahi)...
Bonus points are I use a lot less GNU software on Alpine too, and my RPM-
hating friends are cheering me on too...

While making the switch, I hit a small snag, my machine was set to not
boot from removable media or netboot (and I was feeling too lazy to put
the Alpine installer on an internal HDD)... To enter the CMOS/BIOS setup
on that box, I am supposed to hit the 'delete' key on the keyboard,
easy, right?  Wrong, I tried to do it from both a PS/2 keyboard and a
USB keyboard, no response at all... I don't know if the machine is one
of those weird ones that has its PS/2 ports running on the USB bus, so I
thought it could be related to the so-called 'legacy USB' setting that
most USB-equipped machines seem to have... Since I couldn't get into the
setup screen, I found the CMOS battery on the mobo and pulled it, and
then I used the reset jumper on the mobo... Short story is that the
machine will not turn on at all now. No biggie, I have a spare box.

So basically I have gone from this:
openSUSE Leap 15.1 (kernel 4.12.14)
AMD 1.6 GHz Athlon 64 2650e (Lima) (15 watt TDP)
3999MB RAM Non-ECC

To this:
Alpine Linux v3.9 (kernel 4.19.41)
Intel 2 GHz Pentium Dual Core E2180 (Conroe/Allendale) (65 watt TDP)
3013 MB RAM Non-ECC

Fun.
----------------------------------------

Back to phlog index

gopher.zcrayfish.soy gopher root

This phlog entry has been read 2094 times.
Future direct comment submission has been disabled for this phlog entry.
Comments are still accepted by email, please send to:
zacharygopher@gopher.zcrayfish.soy
Be sure to include the post title in the subject line! Thanks!
Nobody has commented on this post.