💾 Archived View for gemini.bortzmeyer.org › rfc-mirror › rfc2065.txt captured on 2024-05-10 at 16:05:32.
⬅️ Previous capture (2021-11-30)
-=-=-=-=-=-=-
Network Working Group D. Eastlake, 3rd
Request for Comments: 2065 CyberCash
Updates: 1034, 1035 C. Kaufman
Category: Standards Track Iris
January 1997
Domain Name System Security Extensions
Status of this Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Abstract
The Domain Name System (DNS) has become a critical operational part
of the Internet infrastructure yet it has no strong security
mechanisms to assure data integrity or authentication. Extensions to
the DNS are described that provide these services to security aware
resolvers or applications through the use of cryptographic digital
signatures. These digital signatures are included in secured zones
as resource records. Security can still be provided even through
non-security aware DNS servers in many cases.
The extensions also provide for the storage of authenticated public
keys in the DNS. This storage of keys can support general public key
distribution service as well as DNS security. The stored keys enable
security aware resolvers to learn the authenticating key of zones in
addition to those for which they are initially configured. Keys
associated with DNS names can be retrieved to support other
protocols. Provision is made for a variety of key types and
algorithms.
In addition, the security extensions provide for the optional
authentication of DNS protocol transactions.
Eastlake & Kaufman Standards Track [Page 1]
RFC 2065 DNS Security Extensions January 1997
Acknowledgments
The significant contributions of the following persons (in alphabetic
order) to this document are gratefully acknowledged:
Harald T. Alvestrand
Madelyn Badger
Scott Bradner
Matt Crawford
James M. Galvin
Olafur Gudmundsson
Edie Gunter
Sandy Murphy
Masataka Ohta
Michael A. Patton
Jeffrey I. Schiller
Table of Contents
1. Overview of Contents....................................3
2. Overview of the DNS Extensions.........................4
2.1 Services Not Provided..................................4
2.2 Key Distribution.......................................5
2.3 Data Origin Authentication and Integrity...............5
2.3.1 The SIG Resource Record..............................6
2.3.2 Authenticating Name and Type Non-existence...........7
2.3.3 Special Considerations With Time-to-Live.............7
2.3.4 Special Considerations at Delegation Points..........7
2.3.5 Special Considerations with CNAME RRs................8
2.3.6 Signers Other Than The Zone..........................8
2.4 DNS Transaction and Request Authentication.............8
3. The KEY Resource Record.................................9
3.1 KEY RDATA format......................................10
3.2 Object Types, DNS Names, and Keys.....................10
3.3 The KEY RR Flag Field.................................11
3.4 The Protocol Octet....................................13
3.5 The KEY Algorithm Number and the MD5/RSA Algorithm....13
3.6 Interaction of Flags, Algorithm, and Protocol Bytes...14
3.7 KEY RRs in the Construction of Responses..............15
3.8 File Representation of KEY RRs........................16
4. The SIG Resource Record................................16
4.1 SIG RDATA Format......................................17
4.1.1 Signature Data......................................19
4.1.2 MD5/RSA Algorithm Signature Calculation.............20
4.1.3 Zone Transfer (AXFR) SIG............................21
4.1.4 Transaction and Request SIGs........................22
4.2 SIG RRs in the Construction of Responses..............23
4.3 Processing Responses and SIG RRs......................24
Eastlake & Kaufman Standards Track [Page 2]
RFC 2065 DNS Security Extensions January 1997
4.4 Signature Expiration, TTLs, and Validity..............24
4.5 File Representation of SIG RRs........................25
5. Non-existent Names and Types...........................26
5.1 The NXT Resource Record...............................26
5.2 NXT RDATA Format......................................27
5.3 Example...............................................28
5.4 Interaction of NXT RRs and Wildcard RRs...............28
5.5 Blocking NXT Pseudo-Zone Transfers....................29
5.6 Special Considerations at Delegation Points...........29
6. The AD and CD Bits and How to Resolve Securely.........30
6.1 The AD and CD Header Bits.............................30
6.2 Boot File Format......................................32
6.3 Chaining Through Zones................................32
6.4 Secure Time...........................................33
7. Operational Considerations.............................33
7.1 Key Size Considerations...............................34
7.2 Key Storage...........................................34
7.3 Key Generation........................................35
7.4 Key Lifetimes.........................................35
7.5 Signature Lifetime....................................36
7.6 Root..................................................36
8. Conformance............................................36
8.1 Server Conformance....................................36
8.2 Resolver Conformance..................................37
9. Security Considerations................................37
References................................................38
Authors' Addresses........................................39
Appendix: Base 64 Encoding................................40
1. Overview of Contents
This document describes extensions of the Domain Name System (DNS)
protocol to support DNS security and public key distribution. It
assumes that the reader is familiar with the Domain Name System,
particularly as described in RFCs 1033, 1034, and 1035.
Section 2 provides an overview of the extensions and the key
distribution, data origin authentication, and transaction and request
security they provide.
Section 3 discusses the KEY resource record, its structure, use in
DNS responses, and file representation. These resource records
represent the public keys of entities named in the DNS and are used
for key distribution.
Eastlake & Kaufman Standards Track [Page 3]
RFC 2065 DNS Security Extensions January 1997
Section 4 discusses the SIG digital signature resource record, its
structure, use in DNS responses, and file representation. These
resource records are used to authenticate other resource records in
the DNS and optionally to authenticate DNS transactions and requests.
Section 5 discusses the NXT resource record and its use in DNS
responses. The NXT RR permits authenticated denial in the DNS of the
existence of a name or of a particular type for an existing name.
Section 6 discusses how a resolver can be configured with a starting
key or keys and proceed to securely resolve DNS requests.
Interactions between resolvers and servers are discussed for all
combinations of security aware and security non-aware. Two
additional query header bits are defined for signaling between
resolvers and servers.
Section 7 reviews a variety of operational considerations including
key generation, lifetime, and storage.
Section 8 defines levels of conformance for resolvers and servers.
Section 9 provides a few paragraphs on overall security
considerations.
An Appendix is provided that gives details of base 64 encoding which
is used in the file representation of some RR's defined in this
document.
2. Overview of the DNS Extensions
The Domain Name System (DNS) protocol security extensions provide
three distinct services: key distribution as described in Section 2.2
below, data origin authentication as described in Section 2.3 below,
and transaction and request authentication, described in Section 2.4
below.
Special considerations related to "time to live", CNAMEs, and
delegation points are also discussed in Section 2.3.
2.1 Services Not Provided
It is part of the design philosophy of the DNS that the data in it is
public and that the DNS gives the same answers to all inquirers.
Following this philosophy, no attempt has been made to include any
sort of access control lists or other means to differentiate
inquirers.
Eastlake & Kaufman Standards Track [Page 4]
RFC 2065 DNS Security Extensions January 1997
In addition, no effort has been made to provide for any
confidentiality for queries or responses. (This service may be
available via IPSEC [RFC 1825].)
2.2 Key Distribution
Resource records (RRs) are defined to associate keys with DNS names.
This permits the DNS to be used as a public key distribution
mechanism in support of the DNS data origin authentication and other
security services.
The syntax of a KEY resource record (RR) is described in Section 3.
It includes an algorithm identifier, the actual public key
parameters, and a variety of flags including those indicating the
type of entity the key is associated with and/or asserting that there
is no key associated with that entity.
Under conditions described in Section 3.7, security aware DNS servers
will automatically attempt to return KEY resources as additional
information, along with those resource records actually requested, to
minimize the number of queries needed.
2.3 Data Origin Authentication and Integrity
Authentication is provided by associating with resource records in
the DNS cryptographically generated digital signatures. Commonly,
there will be a single private key that signs for an entire zone. If
a security aware resolver reliably learns the public key of the zone,
it can verify, for signed data read from that zone, that it was
properly authorized and is reasonably current. The expected
implementation is for the zone private key to be kept off-line and
used to re-sign all of the records in the zone periodically.
This data origin authentication key belongs to the zone and not to
the servers that store copies of the data. That means compromise of
a server or even all servers for a zone will not necessarily affect
the degree of assurance that a resolver has that it can determine
whether data is genuine.
A resolver can learn the public key of a zone either by reading it
from DNS or by having it staticly configured. To reliably learn the
public key by reading it from DNS, the key itself must be signed.
Thus, to provide a reasonable degree of security, the resolver must
be configured with at least the public key of one zone that it can
use to authenticate signatures. From there, it can securely read the
public keys of other zones, if the intervening zones in the DNS tree
are secure and their signed keys accessible. (It is in principle
more secure to have the resolver manually configured with the public
Eastlake & Kaufman Standards Track [Page 5]
RFC 2065 DNS Security Extensions January 1997
keys of multiple zones, since then the compromise of a single zone
would not permit the faking of information from other zones. It is
also more administratively cumbersome, however, particularly when
public keys change.)
Adding data origin authentication and integrity requires no change to
the "on-the-wire" DNS protocol beyond the addition of the signature
resource type and, as a practical matter, the key resource type
needed for key distribution. This service can be supported by
existing resolver and server implementations so long as they can
support the additional resource types (see Section 8). The one
exception is that CNAME referrals from a secure zone can not be
authenticated if they are from non-security aware servers (see
Section 2.3.5).
If signatures are always separately retrieved and verified when
retrieving the information they authenticate, there will be more
trips to the server and performance will suffer. To avoid this,
security aware servers mitigate that degradation by always attempting
to send the signature(s) needed.
2.3.1 The SIG Resource Record
The syntax of a SIG resource record (signature) is described in
Section 4. It includes the type of the RR(s) being signed, the name
of the signer, the time at which the signature was created, the time
it expires (when it is no longer to be believed), its original time
to live (which may be longer than its current time to live but cannot
be shorter), the cryptographic algorithm in use, and the actual
signature.
Every name in a secured zone will have associated with it at least
one SIG resource record for each resource type under that name except
for glue RRs and delgation point NS RRs. A security aware server
supporting the performance enhanced version of the DNS protocol
security extensions will attempt to return, with RRs retrieved, the
corresponding SIGs. If a server does not support the protocol, the
resolver must retrieve all the SIG records for a name and select the
one or ones that sign the resource record(s) that resolver is
interested in.
Eastlake & Kaufman Standards Track [Page 6]
RFC 2065 DNS Security Extensions January 1997
2.3.2 Authenticating Name and Type Non-existence
The above security mechanism provides only a way to sign existing RRs
in a zone. "Data origin" authentication is not obviously provided
for the non-existence of a domain name in a zone or the non-existence
of a type for an existing name. This gap is filled by the NXT RR
which authenticatably asserts a range of non-existent names in a zone
and the non-existence of types for the name just before that range.
Section 5 below covers the NXT RR.
2.3.3 Special Considerations With Time-to-Live
A digital signature will fail to verify if any change has occurred to
the data between the time it was originally signed and the time the
signature is verified. This conflicts with our desire to have the
time-to-live field tick down when resource records are cached.
This could be avoided by leaving the time-to-live out of the digital
signature, but that would allow unscrupulous servers to set
arbitrarily long time to live values undetected. Instead, we include
the "original" time-to-live in the signature and communicate that
data in addition to the current time-to-live. Unscrupulous servers
under this scheme can manipulate the time to live but a security
aware resolver will bound the TTL value it uses at the original
signed value. Separately, signatures include a time signed and an
expiration time. A resolver that knows the absolute time can
determine securely whether a signature has expired. It is not
possible to rely solely on the signature expiration as a substitute
for the TTL, however, since the TTL is primarily a database
consistency mechanism and, in any case, non-security aware servers
that depend on TTL must still be supported.
2.3.4 Special Considerations at Delegation Points
DNS security would like to view each zone as a unit of data
completely under the control of the zone owner and signed by the
zone's key. But the operational DNS views the leaf nodes in a zone,
which are also the apex nodes of a subzone (i.e., delegation points),
as "really" belonging to the subzone. These nodes occur in two
master files and may have RRs signed by both the upper and lower
zone's keys. A retrieval could get a mixture of these RRs and SIGs,
especially since one server could be serving both the zone above and
below a delegation point.
In general, there must be a zone KEY RR for the subzone in the
superzone and the copy signed in the superzone is controlling. For
all but one other RR type that should appearing in both the superzone
Eastlake & Kaufman Standards Track [Page 7]
RFC 2065 DNS Security Extensions January 1997
and subzone, the data from the subzone is more authoritative. To
avoid conflicts, only the KEY RR in the superzone should be signed
and the NS and any A (glue) RRs should only be signed in the subzone.
The SOA and any other RRs that have the zone name as owner should
appear only in the subzone and thus are signed there. The NXT RR type
is an exceptional case that will always appear differently and
authoritatively in both the superzone and subzone, if both are
secure, as described in Section 5.
2.3.5 Special Considerations with CNAME RRs
There is a significant problem when security related RRs with the
same owner name as a CNAME RR are retrieved from a non-security-aware
server. In particular, an initial retrieval for the CNAME or any
other type will not retrieve any associated signature, key, or NXT
RR. For types other than CNAME, it will retrieve that type at the
target name of the CNAME (or chain of CNAMEs) and will return the
CNAME as additional information. In particular, a specific retrieval
for type SIG will not get the SIG, if any, at the original CNAME
domain name but rather a SIG at the target name.
In general, security aware servers MUST be used to securely CNAME in
DNS. Security aware servers must (1) allow KEY, SIG, and NXT RRs
along with CNAME RRs, (2) suppress CNAME processing on retrieval of
these types as well as on retrieval of the type CNAME, and (3)
automatically return SIG RRs authenticating the CNAME or CNAMEs
encountered in resolving a query. This is a change from the previous
DNS standard which prohibited any other RR type at a node where a
CNAME RR was present.
2.3.6 Signers Other Than The Zone
There are two cases where a SIG resource record is signed by other
than the zone private key. One is for support of dynamic update
where an entity is permitted to authenticate/update its own records.
The public key of the entity must be present in the DNS and be
appropriately signed but the other RR(s) may be signed with the
entity's key. The other is for support of transaction and request
authentication as described in Section 2.4 immediately below.
2.4 DNS Transaction and Request Authentication
The data origin authentication service described above protects
retrieved resource records but provides no protection for DNS
requests or for message headers.
Eastlake & Kaufman Standards Track [Page 8]
RFC 2065 DNS Security Extensions January 1997
If header bits are falsely set by a server, there is little that can
be done. However, it is possible to add transaction authentication.
Such authentication means that a resolver can be sure it is at least
getting messages from the server it thinks it queried, that the
response is from the query it sent, and that these messages have not
been diddled in transit. This is accomplished by optionally adding a
special SIG resource record at the end of the reply which digitally
signs the concatenation of the server's response and the resolver's
query.
Requests can also be authenticated by including a special SIG RR at
the end of the request. Authenticating requests serves no function
in the current DNS and requests with a non-empty additional
information section are ignored by almost all current DNS servers.
However, this syntax for signing requests is defined in connection
with authenticating future secure dynamic update requests or the
like.
The private keys used in transaction and request security belongs to
the host composing the request or reply message, not to the zone
involved. The corresponding public key is normally stored in and
retrieved from the DNS.
Because requests and replies are highly variable, message
authentication SIGs can not be pre-calculated. Thus it will be
necessary to keep the private key on-line, for example in software or
in a directly connected piece of hardware.
3. The KEY Resource Record
The KEY resource record (RR) is used to document a key that is
associated with a Domain Name System (DNS) name. It will be a public
key as only public keys are stored in the DNS. This can be the
public key of a zone, a host or other end entity, or a user. A KEY
RR is, like any other RR, authenticated by a SIG RR. Security aware
DNS implementations MUST be designed to handle at least two
simultaneously valid keys of the same type associated with a name.
The type number for the KEY RR is 25.
Eastlake & Kaufman Standards Track [Page 9]
RFC 2065 DNS Security Extensions January 1997
3.1 KEY RDATA format
The RDATA for a KEY RR consists of flags, a protocol octet, the
algorithm number, and the public key itself. The format is as
follows:
1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| flags | protocol | algorithm |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| /
/ public key /
/ /
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-|
The meaning of the KEY RR owner name, flags, and protocol octet are
described in Sections 3.2, 3.3 and 3.4 below respectively. The flags
and algorithm must be examined before any data following the
algorithm octet as they control the format and even whether there is
any following data. The algorithm and public key fields are
described in Section 3.5. The format of the public key is algorithm
dependent.
3.2 Object Types, DNS Names, and Keys
The public key in a KEY RR belongs to the object named in the owner
name.
This DNS name may refer to up to three different categories of
things. For example, dee.cybercash.com could be (1) a zone, (2) a
host or other end entity , and (3) the mapping into a DNS name of the
user or account dee@cybercash.com. Thus, there are flags, as
described below, in the KEY RR to indicate with which of these roles
the owner name and public key are associated. Note that an
appropriate zone KEY RR MUST occur at the apex node of a secure zone
and at every leaf node which is a delegation point (and thus the same
owner name as the apex of a subzone) within a secure zone.
Although the same name can be used for up to all three of these
categories, such overloading of a name is discouraged. It is also
possible to use the same key for different things with the same name
or even different names, but this is strongly discouraged. In
particular, the use of a zone key as a non-zone key will usually
require that the corresponding private key be kept on line and
thereby become more vulnerable.
Eastlake & Kaufman Standards Track [Page 10]
RFC 2065 DNS Security Extensions January 1997
In addition to the name type bits, there are additional flag bits
including the "type" field, "experimental" bit, "signatory" field,
etc., as described below.
3.3 The KEY RR Flag Field
In the "flags" field:
Bit 0 and 1 are the key "type" field. Bit 0 a one indicates
that use of the key is prohibited for authentication. Bit 1 a one
indicates that use of the key is prohibited for confidentiality. If
this field is zero, then use of the key for authentication and/or
confidentiality is permitted. Note that DNS security makes use of
keys for authentication only. Confidentiality use flagging is
provided for use of keys in other protocols. Implementations not
intended to support key distribution for confidentiality MAY require
that the confidentiality use prohibited bit be on for keys they
serve. If both bits of this field are one, the "no key" value, there
is no key information and the RR stops after the algorithm octet. By
the use of this "no key" value, a signed KEY RR can authenticatably
assert that, for example, a zone is not secured.
Bit 2 is the "experimental" bit. It is ignored if the type
field indicates "no key" and the following description assumes that
type field to be non-zero. Keys may be associated with zones,
entities, or users for experimental, trial, or optional use, in which
case this bit will be one. If this bit is a zero, it means that the
use or availability of security based on the key is "mandatory".
Thus, if this bit is off for a zone key, the zone should be assumed
secured by SIG RRs and any responses indicating the zone is not
secured should be considered bogus. If this bit is a one for a host
or end entity, it might sometimes operate in a secure mode and at
other times operate without security. The experimental bit, like all
other aspects of the KEY RR, is only effective if the KEY RR is
appropriately signed by a SIG RR. The experimental bit must be zero
for safe secure operation and should only be a one for a minimal
transition period.
Bits 3-4 are reserved and must be zero.
Bit 5 on indicates that this is a key associated with a "user"
or "account" at an end entity, usually a host. The coding of the
owner name is that used for the responsible individual mailbox in the
SOA and RP RRs: The owner name is the user name as the name of a node
under the entity name. For example, "j.random_user" on
host.subdomain.domain could have a public key associated through a
KEY RR with name j\.random_user.host.subdomain.domain and the user
bit a one. It could be used in an security protocol where
Eastlake & Kaufman Standards Track [Page 11]
RFC 2065 DNS Security Extensions January 1997
authentication of a user was desired. This key might be useful in IP
or other security for a user level service such a telnet, ftp,
rlogin, etc.
Bit 6 on indicates that this is a key associated with the non-
zone "entity" whose name is the RR owner name. This will commonly be
a host but could, in some parts of the DNS tree, be some other type
of entity such as a telephone number [RFC 1530]. This is the public
key used in connection with the optional DNS transaction
authentication service if the owner name is a DNS server host. It
could also be used in an IP-security protocol where authentication of
at the host, rather than user, level was desired, such as routing,
NTP, etc.
Bit 7 is the "zone" bit and indicates that this is a zone key
for the zone whose name is the KEY RR owner name. This is the public
key used for DNS data origin authentication.
Bit 8 is reserved to be the IPSEC [RFC 1825] bit and indicates
that this key is valid for use in conjunction with that security
standard. This key could be used in connection with secured
communication on behalf of an end entity or user whose name is the
owner name of the KEY RR if the entity or user bits are on. The
presence of a KEY resource with the IPSEC and entity bits on and
experimental and no-key bits off is an assertion that the host speaks
IPSEC.
Bit 9 is reserved to be the "email" bit and indicate that this
key is valid for use in conjunction with MIME security multiparts.
This key could be used in connection with secured communication on
behalf of an end entity or user whose name is the owner name of the
KEY RR if the entity or user bits are on.
Bits 10-11 are reserved and must be zero.
Bits 12-15 are the "signatory" field. If non-zero, they
indicate that the key can validly sign RRs or updates of the same
name. If the owner name is a wildcard, then RRs or updates with any
name which is in the wildcard's scope can be signed. Fifteen
different non-zero values are possible for this field and any
differences in their meaning are reserved for definition in
connection with DNS dynamic update or other new DNS commands. Zone
keys always have authority to sign any RRs in the zone regardless of
the value of this field. The signatory field, like all other aspects
of the KEY RR, is only effective if the KEY RR is appropriately
signed by a SIG RR.
Eastlake & Kaufman Standards Track [Page 12]
RFC 2065 DNS Security Extensions January 1997
3.4 The Protocol Octet
It is anticipated that some keys stored in DNS will be used in
conjunction with Internet protocols other than DNS (keys with zone
bit or signatory field non-zero) and IPSEC/email (keys with IPSEC
and/or email bit set). The protocol octet is provided to indicate
that a key is valid for such use and, for end entity keys or the host
part of user keys, that the secure version of that protocol is
implemented on that entity or host.
Values between 1 and 191 decimal inclusive are available for
assignment by IANA for such protocols. The 63 values between 192 and
254 inclusive will not be assigned to a specific protocol and are
available for experimental use under bilateral agreement. Value 0
indicates, for a particular key, that it is not valid for any
particular additional protocol beyond those indicated in the flag
field. And value 255 indicates that the key is valid for all assigned
protocols (those in the 1 to 191 range).
It is intended that new uses of DNS stored keys would initially be
implemented, and operational experience gained, using the
experimental range of the protocol octet. If demand for widespread
deployment for the indefinite future warrants, a value in the
assigned range would then be designated for the protocol. Finally,
(1) should the protocol become so widespread in conjunction with
other protocols and with which it shares key values that duplicate
RRs are a serious burden and (2) should the protocol provide
substantial facilities not available in any protocol for which a
flags field bit has been allocated, then one of the remaining flag
field bits may be allocated to the protocol. When such a bit has been
allocated, a key can be simultaneously indicated as valid for that
protocol and the entity or host can be simultaneously flagged as
implementing the secure version of that protocol, along with other
protocols for which flag field bits have been assigned.
3.5 The KEY Algorithm Number and the MD5/RSA Algorithm
This octet is the key algorithm parallel to the same field for the
SIG resource. The MD5/RSA algorithm described in this document is
number 1. Numbers 2 through 252 are available for assignment should
sufficient reason arise. However, the designation of a new algorithm
could have a major impact on interoperability and requires an IETF
standards action. Number 254 is reserved for private use and will
never be assigned a specific algorithm. For number 254, the public
key area shown in the packet diagram above will actually begin with a
length byte followed by an Object Identifier (OID) of that length.
The OID indicates the private algorithm in use and the remainder of
the area is whatever is required by that algorithm. Number 253 is
Eastlake & Kaufman Standards Track [Page 13]
RFC 2065 DNS Security Extensions January 1997
reserved as the "expiration date algorithm" for use where the
expiration date or other labeling fields of SIGs are desired without
any actual security. It is anticipated that this algorithm will only
be used in connection with some modes of DNS dynamic update. For
number 253, the public key area is null. Values 0 and 255 are
reserved.
If the type field does not have the "no key" value and the algorithm
field is 1, indicating the MD5/RSA algorithm, the public key field is
structured as follows:
1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| pub exp length| public key exponent /
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| /
+- modulus /
| /
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-/
To promote interoperability, the exponent and modulus are each
limited to 2552 bits in length. The public key exponent is a
variable length unsigned integer. Its length in octets is
represented as one octet if it is in the range of 1 to 255 and by a
zero octet followed by a two octet unsigned length if it is longer
than 255 bytes. The public key modulus field is a multiprecision
unsigned integer. The length of the modulus can be determined from
the RDLENGTH and the preceding RDATA fields including the exponent.
Leading zero bytes are prohibited in the exponent and modulus.
3.6 Interaction of Flags, Algorithm, and Protocol Bytes
Various combinations of the no-key type value, algorithm byte,
protocol byte, and any protocol indicating flags (such as the
reserved IPSEC flag) are possible. (Note that the zone flag bit
being on or the signatory field being non-zero is effectively a DNS
protocol flag on.) The meaning of these combinations is indicated
below:
Eastlake & Kaufman Standards Track [Page 14]
RFC 2065 DNS Security Extensions January 1997
NK = no key type value
AL = algorithm byte
PR = protocols indicated by protocol byte or protocol flags
x represents any valid non-zero value(s).
AL PR NK Meaning
0 0 0 Illegal, claims key but has bad algorithm field.
0 0 1 Specifies total lack of security for owner.
0 x 0 Illegal, claims key but has bad algorithm field.
0 x 1 Specified protocols insecure, others may be secure.
x 0 0 Useless. Gives key but no protocols to use it.
x 0 1 Useless. Denies key but for no protocols.
x x 0 Specifies key for protocols and asserts that
those protocols are implemented with security.
x x 1 Algorithm not understood for protocol.
(remember, in reference to the above table, that a protocol
byte of 255 means all protocols with protocol byte values
assigned)
3.7 KEY RRs in the Construction of Responses
An explicit request for KEY RRs does not cause any special additional
information processing except, of course, for the corresponding SIG
RR from a security aware server.
Security aware DNS servers MUST include KEY RRs as additional
information in responses where appropriate including the following:
(1) On the retrieval of NS RRs, the zone key KEY RR(s) for the zone
served by these name servers MUST be included as additional
information if space is avilable. There will always be at least one
such KEY RR in a secure zone, even if it has the no-key type value to
indicate that the subzone is insecure. If not all additional
information will fit, the KEY RR(s) have higher priority than type A
or AAAA glue RRs. If such a KEY RR does not fit on a retrieval, the
retrieval must be considered truncated.
(2) On retrieval of type A or AAAA RRs, the end entity KEY RR(s) MUST
be included if space is available. On inclusion of A or AAAA RRs as
additional information, their KEY RRs will also be included but with
lower priority than the relevant A or AAAA RRs.
Eastlake & Kaufman Standards Track [Page 15]
RFC 2065 DNS Security Extensions January 1997
3.8 File Representation of KEY RRs
KEY RRs may appear as lines in a zone data master file.
The flag field, protocol, and algorithm number octets are then
represented as unsigned integers. Note that if the type field has
the "no key" value or the algorithm specified is 253, nothing appears
after the algorithm octet.
The remaining public key portion is represented in base 64 (see
Appendix) and may be divided up into any number of white space
separated substrings, down to single base 64 digits, which are
concatenated to obtain the full signature. These substrings can span
lines using the standard parenthesis.
Note that the public key may have internal sub-fields but these do
not appear in the master file representation. For example, with
algorithm 1 there is a public exponent size, then a public exponent,
and then a modulus. With algorithm 254, there will be an OID size,
an OID, and algorithm dependent information. But in both cases only a
single logical base 64 string will appear in the master file.
4. The SIG Resource Record
The SIG or "signature" resource record (RR) is the fundamental way
that data is authenticated in the secure Domain Name System (DNS). As
such it is the heart of the security provided.
The SIG RR unforgably authenticates other RRs of a particular type,
class, and name and binds them to a time interval and the signer's
domain name. This is done using cryptographic techniques and the
signer's private key. The signer is frequently the owner of the zone
from which the RR originated.
Eastlake & Kaufman Standards Track [Page 16]
RFC 2065 DNS Security Extensions January 1997
4.1 SIG RDATA Format
The RDATA portion of a SIG RR is as shown below. The integrity of
the RDATA information is protected by the signature field.
1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| type covered | algorithm | labels |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| original TTL |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| signature expiration |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| time signed |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| key footprint | /
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ signer's name /
/ /
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| /
+- signature /
/ /
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The value of the SIG RR type is 24.
The "type covered" is the type of the other RRs covered by this SIG.
The algorithm number is an octet specifying the digital signature
algorithm used parallel to the algorithm octet for the KEY RR. The
MD5/RSA algorithm described in this document is number 1. Numbers 2
through 252 are available for assignment should sufficient reason
arise to allocate them. However, the designation of a new algorithm
could have a major impact on the interoperability of the global DNS
system and requires an IETF standards action. Number 254 is reserved
for private use and will not be assigned a specific algorithm. For
number 254, the "signature" area shown above will actually begin with
a length byte followed by an Object Identifier (OID) of that length.
The OID indicates the private algorithm in use and the remainder of
the area is whatever is required by that algorithm. Number 253,
known as the "expiration date algorithm", is used when the expiration
date or other non-signature fields of the SIG are desired without any
actual security. It is anticipated that this algorithm will only be
used in connection with some modes of DNS dynamic update. For number
253, the signature field will be null. Values 0 and 255 are
reserved.
Eastlake & Kaufman Standards Track [Page 17]
RFC 2065 DNS Security Extensions January 1997
The "labels" octet is an unsigned count of how many labels there are
in the original SIG RR owner name not counting the null label for
root and not counting any initial "*" for a wildcard. If a secured
retrieval is the result of wild card substitution, it is necessary
for the resolver to use the original form of the name in verifying
the digital signature. This field helps optimize the determination
of the original form thus reducing the effort in authenticating
signed data.
If, on retrieval, the RR appears to have a longer name than indicated
by "labels", the resolver can tell it is the result of wildcard
substitution. If the RR owner name appears to be shorter than the
labels count, the SIG RR must be considered corrupt and ignored. The
maximum number of labels allowed in the current DNS is 127 but the
entire octet is reserved and would be required should DNS names ever
be expanded to 255 labels. The following table gives some examples.
The value of "labels" is at the top, the retrieved owner name on the
left, and the table entry is the name to use in signature
verification except that "bad" means the RR is corrupt.
labels= | 0 | 1 | 2 | 3 | 4 |
--------+-----+------+--------+----------+----------+
.| . | bad | bad | bad | bad |
d.| *. | d. | bad | bad | bad |
c.d.| *. | *.d. | c.d. | bad | bad |
b.c.d.| *. | *.d. | *.c.d. | b.c.d. | bad |
a.b.c.d.| *. | *.d. | *.c.d. | *.b.c.d. | a.b.c.d. |
The "original TTL" field is included in the RDATA portion to avoid
(1) authentication problems that caching servers would otherwise
cause by decrementing the real TTL field and (2) security problems
that unscrupulous servers could otherwise cause by manipulating the
real TTL field. This original TTL is protected by the signature
while the current TTL field is not.
NOTE: The "original TTL" must be restored into the covered RRs when
the signature is verified. This implies that all RRs for a
particular type, name, and class must have the same TTL to start
with.
The SIG is valid until the "signature expiration" time which is an
unsigned number of seconds since the start of 1 January 1970, GMT,
ignoring leap seconds. (See also Section 4.4.) SIG RRs should not
have a date signed significantly in the future. To prevent
misordering of network requests to update a zone dynamically,
monotonically increasing "time signed" dates may be necessary.
Eastlake & Kaufman Standards Track [Page 18]
RFC 2065 DNS Security Extensions January 1997
The "time signed" field is an unsigned number of seconds since the
start of 1 January 1970, GMT, ignoring leap seconds.
A SIG RR with an expiration date before the time signed must be
considered corrupt and ignored.
The "key footprint" is a 16 bit quantity that is used to help
efficiently select between multiple keys which may be applicable and
as a quick check that a public key about to be used for the
computationally expensive effort to check the signature is possibly
valid. Its exact meaning is algorithm dependent. For the MD5/RSA
algorithm, it is the next to the bottom two octets of the public key
modulus needed to decode the signature field. That is to say, the
most significant 16 of the lest significant 24 bits of the modulus in
network order.
The "signer's name" field is the domain name of the signer generating
the SIG RR. This is the owner of the public KEY RR that can be used
to verify the signature. It is frequently the zone which contained
the RR(s) being authenticated. The signer's name may be compressed
with standard DNS name compression when being transmitted over the
network.
The structure of the "signature" field is described below.
4.1.1 Signature Data
Except for algorithm number 253 where it is null, the actual
signature portion of the SIG RR binds the other RDATA fields to all
of the "type covered" RRs with that owner name and class. These
covered RRs are thereby authenticated. To accomplish this, a data
sequence is constructed as follows:
data = RDATA | RR(s)...
where "|" is concatenation, RDATA is all the RDATA fields in the SIG
RR itself before and not including the signature, and RR(s) are all
the RR(s) of the type covered with the same owner name and class as
the SIG RR in canonical form and order. How this data sequence is
processed into the signature is algorithm dependent.
For purposes of DNS security, the canonical form for an RR is the RR
with domain names (1) fully expanded (no name compression via
pointers), (2) all domain name letters set to lower case, and (3) the
original TTL substituted for the current TTL.
Eastlake & Kaufman Standards Track [Page 19]
RFC 2065 DNS Security Extensions January 1997
For purposes of DNS security, the canonical order for RRs is to sort
them in ascending order by name, considering labels as a left
justified unsigned octet sequence in network (transmission) order
where a missing octet sorts before a zero octet. (See also ordering
discussion in Section 5.1.) Within any particular name they are
similarly sorted by type and then RDATA as a left justified unsigned
octet sequence. EXCEPT that the type SIG RR(s) covering any
particular type appear immediately after the other RRs of that type.
(This special consideration for SIG RR(s) in ordering really only
applies to calculating the AXFR SIG RR as explained in section 4.1.3
below.) Thus if at name a.b there are two A RRs and one KEY RR,
their order with SIGs for concatenating the "data" to be signed would
be as follows:
a.b. A ....
a.b. A ....
a.b. SIG A ...
a.b. KEY ...
a.b. SIG KEY ...
SIGs covering type ANY should not be included in a zone.
4.1.2 MD5/RSA Algorithm Signature Calculation
For the MD5/RSA algorithm, the signature is as follows
hash = MD5 ( data )
signature = ( 01 | FF* | 00 | prefix | hash ) ** e (mod n)
where MD5 is the message digest algorithm documented in RFC 1321, "|"
is concatenation, "e" is the private key exponent of the signer, and
"n" is the modulus of the signer's public key. 01, FF, and 00 are
fixed octets of the corresponding hexadecimal value. "prefix" is the
ASN.1 BER MD5 algorithm designator prefix specified in PKCS1, that
is,
hex 3020300c06082a864886f70d020505000410 [NETSEC].
This prefix is included to make it easier to use RSAREF or similar
packages. The FF octet is repeated the maximum number of times such
that the value of the quantity being exponentiated is one octet
shorter than the value of n.
(The above specifications are identical to the corresponding part of
Public Key Cryptographic Standard #1 [PKCS1].)
Eastlake & Kaufman Standards Track [Page 20]
RFC 2065 DNS Security Extensions January 1997
The size of n, including most and least significant bits (which will
be 1) SHALL be not less than 512 bits and not more than 2552 bits. n
and e SHOULD be chosen such that the public exponent is small.
Leading zeros bytes are not permitted in the MD5/RSA algorithm
signature.
A public exponent of 3 minimizes the effort needed to decode a
signature. Use of 3 as the public exponent may be weak for
confidentiality uses since, if the same data can be collected
encrypted under three different keys with an exponent of 3 then,
using the Chinese Remainder Theorem, the original plain text can be
easily recovered. This weakness is not significant for DNS because
we seek only authentication, not confidentiality.
4.1.3 Zone Transfer (AXFR) SIG
The above SIG mechanisms assure the authentication of all zone signed
RRs of a particular name, class and type. However, to efficiently
assure the completeness and security of zone transfers, a SIG RR
owned by the zone name must be created with a type covered of AXFR
that covers all zone signed RRs in the zone and their zone SIGs but
not the SIG AXFR itself. The RRs are ordered and concatenated for
hashing as described in Section 4.1.1. (See also ordering discussion
in Section 5.1.)
The AXFR SIG must be calculated last of all zone key signed SIGs in
the zone. In effect, when signing the zone, you order, as described
above, all RRs to be signed by the zone, and all associated glue RRs
and delegation point NS RRs. You can then make one pass inserting
all the zone SIGs. As you proceed you hash RRs to be signed into
both an RRset hash and the zone hash. When the name or type changes
you calculate and insert the RRset zone SIG, clear the RRset hash,
and hash that SIG into the zone hash (note that glue RRs and
delegation point NSs are not zone signed but zone apex NSs are).
When you have finished processing all the starting RRs as described
above, you can then use the cumulative zone hash RR to calculate and
insert an AXFR SIG covering the zone. Of course any computational
technique producing the same results as above is permitted.
The AXFR SIG really belongs to the zone as a whole, not to the zone
name. Although it should be correct for the zone name, the labels
field of an AXFR SIG is otherwise meaningless. The AXFR SIG is only
retrieved as part of a zone transfer. After validation of the AXFR
SIG, the zone MAY be considered valid without verification of the
internal zone signed SIGs in the zone; however, any RRs authenticated
by SIGs signed by entity keys or the like MUST still be validated.
The AXFR SIG SHOULD be transmitted first in a zone transfer so the
Eastlake & Kaufman Standards Track [Page 21]
RFC 2065 DNS Security Extensions January 1997
receiver can tell immediately that they may be able to avoid
verifying other zone signed SIGs.
RRs which are authenticated by a dynamic update key and not by the
zone key (see Section 3.2) are not included in the AXFR SIG. They may
originate in the network and might not, in general, be migrated to
the recommended off line zone signing procedure (see Section 7.2).
Thus, such RRs are not directly signed by the zone, are not included
in the AXFR SIG, and are protected against omission from zone
transfers only to the extent that the server and communication can be
trusted.
4.1.4 Transaction and Request SIGs
A response message from a security aware server may optionally
contain a special SIG as the last item in the additional information
section to authenticate the transaction.
This SIG has a "type covered" field of zero, which is not a valid RR
type. It is calculated by using a "data" (see Section 4.1.2) of the
entire preceding DNS reply message, including DNS header but not the
IP header, concatenated with the entire DNS query message that
produced this response, including the query's DNS header but not its
IP header. That is
data = full response (less final transaction SIG) | full query
Verification of the transaction SIG (which is signed by the server
host key, not the zone key) by the requesting resolver shows that the
query and response were not tampered with in transit, that the
response corresponds to the intended query, and that the response
comes from the queried server.
A DNS request may be optionally signed by including one or more SIGs
at the end of the query. Such SIGs are identified by having a "type
covered" field of zero. They sign the preceding DNS request message
including DNS header but not including the IP header or at the
begining or any preceding request SIGs at the end. Such request SIGs
are included in the "data" used to form any optional response
transaction SIG.
WARNING: Request SIGs are unnecessary for currently defined queries
and will cause almost all existing DNS servers to completely ignore a
query. However, such SIGs may be needed to authenticate future DNS
secure dynamic update or other requests.
Eastlake & Kaufman Standards Track [Page 22]
RFC 2065 DNS Security Extensions January 1997
4.2 SIG RRs in the Construction of Responses
Security aware DNS servers MUST, for every authoritative RR the query
will return, attempt to send the available SIG RRs which authenticate
the requested RR. The following rules apply to the inclusion of SIG
RRs in responses:
1. when an RR set is placed in a response, its SIG RR has a higher
priority for inclusion than other additional RRs that may need to
be included. If space does not permit its inclusion, the response
MUST be considered truncated except as provided in 2 below.
2. when a SIG RR is present in the zone for an additional information
section RR, the response MUST NOT be considered truncated merely
because space does not permit the inclusion of its SIG RR.
3. SIGs to authenticate non-authoritative data (glue records and NS
RRs for subzones) are unnecessary and MUST NOT be sent. (Note
that KEYs for subzones are controlling in a superzone so the
superzone's signature on the KEY MUST be included (unless the KEY
was additional information and the SIG did not fit).)
4. If a SIG covers any RR that would be in the answer section of the
response, its automatic inclusion MUST be the answer section. If
it covers an RR that would appear in the authority section, its
automatic inclusion MUST be in the authority section. If it
covers an RR that would appear in the additional information
section it MUST appear in the additional information section.
This is a change in the existing standard which contemplates only
NS and SOA RRs in the authority section.
5. Optionally, DNS transactions may be authenticated by a SIG RR at
the end of the response in the additional information section
(Section 4.1.4). Such SIG RRs are signed by the DNS server
originating the response. Although the signer field MUST be the
name of the originating server host, the owner name, class, TTL,
and original TTL, are meaningless. The class and TTL fields
SHOULD be zero. To conserve space, the owner name SHOULD be root
(a single zero octet). If transaction authentication is desired,
that SIG RR must be considered higher priority for inclusion than
any other RR in the response.
Eastlake & Kaufman Standards Track [Page 23]
RFC 2065 DNS Security Extensions January 1997
4.3 Processing Responses and SIG RRs
The following rules apply to the processing of SIG RRs included in a
response:
1. a security aware resolver that receives a response from what it
believes to be a security aware server via a secure communication
with the AD bit (see Section 6.1) set, MAY choose to accept the
RRs as received without verifying the zone SIG RRs.
2. in other cases, a security aware resolver SHOULD verify the SIG
RRs for the RRs of interest. This may involve initiating
additional queries for SIG or KEY RRs, especially in the case of
getting a response from an insecure server. (As explained in 4.2
above, it will not be possible to secure CNAMEs being served up by
non-secure resolvers.)
NOTE: Implementers might expect the above SHOULD to be a MUST.
However, local policy or the calling application may not require
the security services.
3. If SIG RRs are received in response to a user query explicitly
specifying the SIG type, no special processing is required.
If the message does not pass reasonable checks or the SIG does not
check against the signed RRs, the SIG RR is invalid and should be
ignored. If all of the SIG RR(s) purporting to authenticate a set of
RRs are invalid, then the set of RR(s) is not authenticated.
If the SIG RR is the last RR in a response in the additional
information section and has a type covered of zero, it is a
transaction signature of the response and the query that produced the
response. It MAY be optionally checked and the message rejected if
the checks fail. But even if the checks succeed, such a transaction
authentication SIG does NOT authenticate any RRs in the message.
Only a proper SIG RR signed by the zone or a key tracing its
authority to the zone or to static resolver configuration can
authenticate RRs. If a resolver does not implement transaction
and/or request SIGs, it MUST ignore them without error.
If all reasonable checks indicate that the SIG RR is valid then RRs
verified by it should be considered authenticated.
4.4 Signature Expiration, TTLs, and Validity
Security aware servers must not consider SIG RRs to authenticate
anything after their expiration time and not consider any RR to be
authenticated after its signatures have expired. Within that
Eastlake & Kaufman Standards Track [Page 24]
RFC 2065 DNS Security Extensions January 1997
constraint, servers should continue to follow DNS TTL aging. Thus
authoritative servers should continue to follow the zone refresh and
expire parameters and a non-authoritative server should count down
the TTL and discard RRs when the TTL is zero. In addition, when RRs
are transmitted in a query response, the TTL should be trimmed so
that current time plus the TTL does not extend beyond the signature
expiration time. Thus, in general, the TTL on an transmitted RR
would be
min(sigExpTim,max(zoneMinTTL,min(originalTTL,currentTTL)))
4.5 File Representation of SIG RRs
A SIG RR can be represented as a single logical line in a zone data
file [RFC1033] but there are some special considerations as described
below. (It does not make sense to include a transaction or request
authenticating SIG RR in a file as they are a transient
authentication that covers data including an ephemeral transaction
number and so must be calculated in real time.)
There is no particular problem with the signer, covered type, and
times. The time fields appears in the form YYYYMMDDHHMMSS where YYYY
is the year, the first MM is the month number (01-12), DD is the day
of the month (01-31), HH is the hour in 24 hours notation (00-23),
the second MM is the minute (00-59), and SS is the second (00-59).
The original TTL and algorithm fields appear as unsigned integers.
If the original TTL, which applies to the type signed, is the same as
the TTL of the SIG RR itself, it may be omitted. The date field
which follows it is larger than the maximum possible TTL so there is
no ambiguity.
The "labels" field does not appear in the file representation as it
can be calculated from the owner name.
The key footprint appears as an unsigned decimal number.
However, the signature itself can be very long. It is the last data
field and is represented in base 64 (see Appendix) and may be divided
up into any number of white space separated substrings, down to
single base 64 digits, which are concatenated to obtain the full
signature. These substrings can be split between lines using the
standard parenthesis.
Eastlake & Kaufman Standards Track [Page 25]
RFC 2065 DNS Security Extensions January 1997
5. Non-existent Names and Types
The SIG RR mechanism described in Section 4 above provides strong
authentication of RRs that exist in a zone. But is it not clear
above how to authenticatably deny the existence of a name in a zone
or a type for an existent name.
The nonexistence of a name in a zone is indicated by the NXT ("next")
RR for a name interval containing the nonexistent name. A NXT RR and
its SIG are returned in the authority section, along with the error,
if the server is security aware. The same is true for a non-existent
type under an existing name. This is a change in the existing
standard which contemplates only NS and SOA RRs in the authority
section. NXT RRs will also be returned if an explicit query is made
for the NXT type.
The existence of a complete set of NXT records in a zone means that
any query for any name and any type to a security aware server
serving the zone will always result in an reply containing at least
one signed RR.
NXT RRs do not appear in zone master files since they can be derived
from the rest of the zone.
5.1 The NXT Resource Record
The NXT resource record is used to securely indicate that RRs with an
owner name in a certain name interval do not exist in a zone and to
indicate what zone signed RR types are present for an existing name.
The owner name of the NXT RR is an existing name in the zone. It's
RDATA is a "next" name and a type bit map. The presence of the NXT RR
means that generally no name between its owner name and the name in
its RDATA area exists and that no other zone signed types exist under
its owner name. This implies a canonical ordering of all domain
names in a zone.
The ordering is to sort labels as unsigned left justified octet
strings where the absence of a octet sorts before a zero value octet
and upper case letters are treated as lower case letters. Names are
then sorted by sorting on the highest level label and then, within
those names with the same highest level label by the next lower
label, etc. down to leaf node labels. Since we are talking about a
zone, the zone name itself always exists and all other names are the
zone name with some prefix of lower level labels. Thus the zone name
itself always sorts first.
Eastlake & Kaufman Standards Track [Page 26]
RFC 2065 DNS Security Extensions January 1997
There is a potential problem with the last NXT in a zone as it wants
to have an owner name which is the last existing name in canonical
order, which is easy, but it is not obvious what name to put in its
RDATA to indicate the entire remainder of the name space. This is
handled by treating the name space as circular and putting the zone
name in the RDATA of the last NXT in a zone.
There are special considerations due to interaction with wildcards as
explained below.
The NXT RRs for a zone SHOULD be automatically calculated and added
to the zone by the same recommended off-line process that signs the
zone (see Section 7.2). The NXT RR's TTL SHOULD not exceed the zone
minimum TTL.
5.2 NXT RDATA Format
The RDATA for an NXT RR consists simply of a domain name followed by
a bit map.
The type number for the NXT RR is 30.
1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| next domain name /
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| type bit map /
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The NXT RR type bit map is one bit per RR type present for the owner
name similar to the WKS socket bit map. The first bit represents RR
type zero (an illegal type which should not be present.) A one bit
indicates that at least one RR of that type is present for the owner
name. A zero indicates that no such RR is present. All bits not
specified because they are beyond the end of the bit map are assumed
to be zero. Note that bit 30, for NXT, will always be on so the
minimum bit map length is actually four octets. The NXT bit map
should be printed as a list of RR type mnemonics or decimal numbers
similar to the WKS RR.
The domain name may be compressed with standard DNS name compression
when being transmitted over the network. The size of the bit map can
be inferred from the RDLENGTH and the length of the next domain name.
Eastlake & Kaufman Standards Track [Page 27]
RFC 2065 DNS Security Extensions January 1997
5.3 Example
Assume zone foo.tld has entries for
big.foo.tld,
medium.foo.tld.
small.foo.tld.
tiny.foo.tld.
Then a query to a security aware server for huge.foo.tld would
produce an error reply with the authority section data including
something like the following:
big.foo.tld. NXT medium.foo.tld. A MX SIG NXT
big.foo.tld. SIG NXT 1 3 ( ;type-cov=NXT, alg=1, labels=3
19960102030405 ;signature expiration
19951211100908 ;time signed
21435 ;key footprint
foo.tld. ;signer
MxFcby9k/yvedMfQgKzhH5er0Mu/vILz45IkskceFGgiWCn/GxHhai6VAuHAoNUz4YoU
1tVfSCSqQYn6//11U6Nld80jEeC8aTrO+KKmCaY= ;signature (640 bits)
)
Note that this response implies that big.foo.tld is an existing name
in the zone and thus has other RR types associated with it than NXT.
However, only the NXT (and its SIG) RR appear in the response to this
query for huge.foo.tld, which is a non-existent name.
5.4 Interaction of NXT RRs and Wildcard RRs
Since, in some sense, a wildcard RR causes all possible names in an
interval to exist, there should not be an NXT RR that would cover any
part of this interval. Thus if *.X.ZONE exists you would expect an
NXT RR that ends at X.ZONE and one that starts with the last name
covered by *.X.ZONE. However, this "last name covered" is something
very ugly and long like \255\255\255....X.zone. So the NXT for the
interval following is simply given the owner name *.X.ZONE and an
RDATA of the next name after the wildcard. This "*" type owner name
is not expanded when the NXT is returned as authority information in
connection with a query for a non-existent name.
If there could be any wildcard RRs in a zone and thus wildcard NXTs,
care must be taken in interpreting the results of explicit NXT
retrievals as the owner name may be a wildcard expansion.
The existence of one or more wildcard RRs covering a name interval
makes it possible for a malicious server to hide any more
specifically named RRs in the internal. The server can just falsely
Eastlake & Kaufman Standards Track [Page 28]
RFC 2065 DNS Security Extensions January 1997
return the wildcard match NXT instead of the more specifically named
RRs. If there is a zone wide wildcard, there will be an NXT RR whose
owner name is the wild card and whose RDATA is the zone name. In this
case a server could conceal the existence of any more specific RRs in
the zone. It would be possible to design a more strict NXT feature
which would eliminate this possibility. But it would be more complex
and might be so constraining as to make any dynamic update feature
very difficult.
5.5 Blocking NXT Pseudo-Zone Transfers
In a secure zone, a resolver can query for the initial NXT associated
with the zone name. Using the next domain name RDATA field from that
RR, it can query for the next NXT RR. By repeating this, it can walk
through all the NXTs in the zone. If there are no wildcards, it can
use this technique to find all names in a zone. If it does type ANY
queries, it can incrementally get all information in the zone and
thus defeat attempts to administratively block zone transfers.
If there are any wildcards, this NXT walking technique will not find
any more specific RR names in the part of the name space the wildcard
covers. By doing explicit retrievals for wildcard names, a resolver
could determine what intervals are covered by wildcards but still
could not, with these techniques, find any names inside such
intervals except by trying every name.
If it is desired to block NXT walking, the recommended method is to
add a zone wide wildcard of the KEY type with the no-key type value
and with no type (zone, entity, or user) bit on. This will cause
there to be one zone covering NXT RR and leak no information about
what real names exist in the zone. This protection from pseudo-zone
transfers is bought at the expense of eliminating the data origin
authentication of the non-existence of names that NXT RRs can
provide. If an entire zone is covered by a wildcard, a malicious
server can return an RR produced by matching the resulting wildcard
NXT and can thus hide all the real data and delegations in the zone
that have more specific names.
5.6 Special Considerations at Delegation Points
A name (other than root) which is the head of a zone also appears as
the leaf in a superzone. If both are secure, there will always be
two different NXT RRs with the same name. They can be distinguished
by their signers and next domain name fields. Security aware servers
should return the correct NXT automatically when required to
authenticate the non-existence of a name and both NXTs, if available,
on explicit query for type NXT.
Eastlake & Kaufman Standards Track [Page 29]
RFC 2065 DNS Security Extensions January 1997
Insecure servers will never automatically return an NXT and some
implementations may only return the NXT from the subzone on explicit
queries.
6. The AD and CD Bits and How to Resolve Securely
Retrieving or resolving authentic data from the Domain Name System
(DNS) involves starting with one or more trusted public keys for one
or more zones. With trusted keys, a resolver willing to perform
cryptography can progress securely through the secure DNS zone
structure to the zone of interest as described in Section 6.3. Such
trusted public keys would normally be configured in a manner similar
to that described in Section 6.2. However, as a practical matter, a
security aware resolver would still gain some confidence in the
results it returns even if it was not configured with any keys but
trusted what it got from a local well known server as a starting
point.
Data stored at a security aware server needs to be internally
categorized as Authenticated, Pending, or Insecure. There is also a
fourth transient state of Bad which indicates that all SIG checks
have explicitly failed on the data. Such Bad data is not retained at
a security aware server. Authenticated means that the data has a
valid SIG under a KEY traceable via a chain of zero or more SIG and
KEY RRs to a KEY configured at the resolver via its boot file.
Pending data has no authenticated SIGs and at least one additional
SIG the resolver is still trying to authenticate. Insecure data is
data which it is known can never be either Authenticated or found Bad
because it is in or has been reached via a non-secured zone. Behavior
in terms of control of and flagging based on such data labels is
described in Section 6.1.
The proper validation of signatures requires a reasonably secure
shared opinion of the absolute time between resolvers and servers as
described in Section 6.4.
6.1 The AD and CD Header Bits
Two previously unused bits are allocated out of the DNS
query/response format header. The AD (authentic data) bit indicates
in a response that the data included has been verified by the server
providing it. The CD (checking disabled) bit indicates in a query
that non-verified data is acceptable to the resolver sending the
query.
Eastlake & Kaufman Standards Track [Page 30]
RFC 2065 DNS Security Extensions January 1997
These bits are allocated from the must-be-zero Z field as follows:
1 1 1 1 1 1
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
| ID |
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
|QR| Opcode |AA|TC|RD|RA| Z|AD|CD| RCODE |
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
| QDCOUNT |
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
| ANCOUNT |
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
| NSCOUNT |
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
| ARCOUNT |
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
These bits are zero in old servers and resolvers. Thus the responses
of old servers are not flagged as authenticated to security aware
resolvers and queries from non-security aware resolvers do not assert
the checking disabled bit and thus will be answered by security aware
servers only with authenticated data. Aware resolvers MUST not trust
the AD bit unless they trust the server they are talking to and
either have a secure path to it or use DNS transaction security.
Any security aware resolver willing to do cryptography SHOULD assert
the CD bit on all queries to reduce DNS latency time by allowing
security aware servers to answer before they have resolved the
validity of data.
Security aware servers NEVER return Bad data. For non-security aware
resolvers or security aware resolvers requesting service by having
the CD bit clear, security aware servers MUST return only
Authenticated or Insecure data with the AD bit set in the response.
Security aware resolvers will know that if data is Insecure versus
Authentic by the absence of SIG RRs. Security aware servers MAY
return Pending data to security aware resolvers requesting the
service by clearing the AD bit in the response. The AD bit MUST NOT
be set on a response unless all of the RRs in the response are either
Authenticated or Insecure.
Eastlake & Kaufman Standards Track [Page 31]
RFC 2065 DNS Security Extensions January 1997
6.2 Boot File Format
Two boot file directives are added as described in this section.
The format for a boot file directive to configure a starting zone key
is as follows:
pubkey name flags protocol algorithm key-data
for a public key. "name" is the owner name (if the line is
translated into a KEY RR). Flags indicates the type of key and is
the same as the flag octet in the KEY RR. Protocol and algorithm
also have the same meaning as they do in the KEY RR. The material
after the algorithm is algorithm dependent and, for private
algorithms (algorithm 254), starts with the algorithm's identifying
OID and its length. If the "no key" type value is set in flags or
the algorithm is specified as 253, then the key-data after algorithm
is null. When present the key-data is treated as an octet stream and
encoded in base 64 (see Appendix).
A file of keys for cross certification or other purposes can be
configured though the keyfile directive as follows:
keyfile filename
The file looks like a master file except that it can only contain KEY
and SIG RRs with the SIGs signed under a key configured with the
pubkey directive.
While it might seem logical for everyone to start with the key for
the root zone, this has problems. The logistics of updating every
DNS resolver in the world when the root key changes would be
excessive. It may be some time before there even is a root key.
Furthermore, many organizations will explicitly wish their "interior"
DNS implementations to completely trust only their own zone. Such
interior resolvers can then go through the organization's zone
servers to access data outsize the organization's domain and should
only be configured with the key forthe organization's DNS apex.
6.3 Chaining Through Zones
Starting with one or more trusted keys for a zone, it should be
possible to retrieve signed keys for its subzones which have a key
and, if the zone is not root, for its superzone. Every authoritative
secure zone server MUST also include the KEY RR for a super-zone
signed by the secure zone via a keyfile directive. This makes it
possible to climb the tree of zones if one starts below root. A
secure sub-zone is indicated by a KEY RR with non-null key
Eastlake & Kaufman Standards Track [Page 32]
RFC 2065 DNS Security Extensions January 1997
information appearing with the NS RRs for the sub-zone. These make
it possible to descend within the tree of zones.
A resolver should keep track of the number of successive secure zones
traversed from a starting point to any secure zone it can reach. In
general, the lower such a distance number is, the greater the
confidence in the data. Data configured via a boot file directive
should be given a distance number of zero. If a query encounters
different data for the same query with different distance values,
that with a larger value should be ignored.
A security conscious resolver should completely refuse to step from a
secure zone into a non-secure zone unless the non-secure zone is
certified to be non-secure, or only experimentally secure, by the
presence of an authenticated KEY RR for the non-secure zone with the
no-key type value or the presence of a KEY RR with the experimental
bit set. Otherwise the resolver is getting bogus or spoofed data.
If legitimate non-secure zones are encountered in traversing the DNS
tree, then no zone can be trusted as secure that can be reached only
via information from such non-secure zones. Since the non-secure zone
data could have been spoofed, the "secure" zone reach via it could be
counterfeit. The "distance" to data in such zones or zones reached
via such zones could be set to 512 or more as this exceeds the
largest possible distance through secure zones in the DNS.
Nevertheless, continuing to apply secure checks within "secure" zones
reached via non-secure zones is a good practice and will, as a
practical matter, provide some small increase in security.
6.4 Secure Time
Coordinated interpretation of the time fields in SIG RRs requires
that reasonably consistent time be available to the hosts
implementing the DNS security extensions.
A variety of time synchronization protocols exist including the
Network Time Protocol (NTP, RFC1305). If such protocols are used,
they MUST be used securely so that time can not be spoofed.
Otherwise, for example, a host could get its clock turned back and
might then believe old SIG and KEY RRs which were valid but no longer
are.
7. Operational Considerations
This section discusses a variety of considerations in secure
operation of the Domain Name System (DNS) using these protocol
extensions.
Eastlake & Kaufman Standards Track [Page 33]
RFC 2065 DNS Security Extensions January 1997
7.1 Key Size Considerations
There are a number of factors that effect public key size choice for
use in the DNS security extension. Unfortunately, these factors
usually do not all point in the same direction. Choice of zone key
size should generally be made by the zone administrator depending on
their local conditions.
For most schemes, larger keys are more secure but slower. Given a
small public exponent, verification (the most common operation) for
the MD5/RSA algorithm will vary roughly with the square of the
modulus length, signing will vary with the cube of the modulus
length, and key generation (the least common operation) will vary
with the fourth power of the modulus length. The current best
algorithms for factoring a modulus and breaking RSA security vary
roughly with the 1.6 power of the modulus itself. Thus going from a
640 bit modulus to a 1280 bit modulus only increases the verification
time by a factor of 4 but increases the work factor of breaking the
key by over 2^900. An upper bound of 2552 bits has been established
for the MD5/RSA DNS security algorithm for interoperability purposes.
However, larger keys increase the size of the KEY and SIG RRs. This
increases the chance of DNS UDP packet overflow and the possible
necessity for using higher overhead TCP in responses.
The recommended minimum RSA algorithm modulus size, 640 bits, is
believed by the authors to be secure at this time but high level
zones in the DNS tree may wish to set a higher minimum, perhaps 1000
bits, for security reasons. (Since the United States National
Security Agency generally permits export of encryption systems using
an RSA modulus of up to 512 bits, use of that small a modulus, i.e.
n, must be considered weak.)
For a key used only to secure data and not to secure other keys, 640
bits should be adequate at this time.
7.2 Key Storage
It is recommended that zone private keys and the zone file master
copy be kept and used in off-line non-network connected physically
secure machines only. Periodically an application can be run to add
authentication to a zone by adding SIG and NXT RRs and adding no-key
type KEY RRs for subzones where a real KEY RR is not provided. Then
the augmented file can be transferred, perhaps by sneaker-net, to the
networked zone primary server machine.
The idea is to have a one way information flow to the network to
avoid the possibility of tampering from the network. Keeping the
Eastlake & Kaufman Standards Track [Page 34]
RFC 2065 DNS Security Extensions January 1997
zone master file on-line on the network and simply cycling it through
an off-line signer does not do this. The on-line version could still
be tampered with if the host it resides on is compromised. For
maximum security, the master copy of the zone file should be off net
and should not be updated based on an unsecured network mediated
communication.
Note, however, that secure resolvers must be configured with some
trusted on-line public key information (or a secure path to such a
resolver) or they will be unable to authenticate.
Non-zone private keys, such as host or user keys, generally have to
be kept on line to be used for real-time purposes such as DNS
transaction security, IPSEC session set-up, or secure mail.
7.3 Key Generation
Careful key generation is a sometimes overlooked but absolutely
essential element in any cryptographically secure system. The
strongest algorithms used with the longest keys are still of no use
if an adversary can guess enough to lower the size of the likely key
space so that it can be exhaustively searched. Suggestions will be
found in RFC 1750.
It is strongly recommended that key generation also occur off-line,
perhaps on the machine used to sign zones (see Section 7.2).
7.4 Key Lifetimes
No key should be used forever. The longer a key is in use, the
greater the probability that it will have been compromised through
carelessness, accident, espionage, or cryptanalysis. Furthermore, if
key rollover is a rare event, there is an increased risk that, when
the time does come up change the key, no one at the site will
remember how to do it or other problems will have developed in the
procedures.
While key lifetime is a matter of local policy, these considerations
suggest that no zone key should have a lifetime significantly over
four years. A reasonable maximum lifetime for zone keys that are
kept off-line and carefully guarded is 13 months with the intent that
they be replaced every year. A reasonable maximum lifetime for end
entity and useer keys that are used for IP-security or the like and
are kept on line is 36 days with the intent that they be replaced
monthly or more often. In some cases, an entity key lifetime of
somewhat over a day may be reasonable.
Eastlake & Kaufman Standards Track [Page 35]
RFC 2065 DNS Security Extensions January 1997
7.5 Signature Lifetime
Signature expiration times must be set far enough in the future that
it is quite certain that new signatures can be generated before the
old ones expire. However, setting expiration too far into the future
could, if bad data or signatures were ever generated, mean a long
time to flush such badness.
It is recommended that signature lifetime be a small multiple of the
TTL but not less than a reasonable re-signing interval.
7.6 Root
It should be noted that in DNS the root is a zone unto itself. Thus
the root zone key should only be seen signing itself or signing RRs
with names one level below root, such as .aq, .edu, or .arpa.
Implementations MAY reject as bogus any purported root signature of
records with a name more than one level below root. The root zone
contains the root KEY RR signed by a SIG RR under the root key
itself.
8. Conformance
Levels of server and resolver conformance are defined.
8.1 Server Conformance
Two levels of server conformance are defined as follows:
Minimal server compliance is the ability to store and retrieve
(including zone transfer) SIG, KEY, and NXT RRs. Any secondary,
caching, or other server for a secure zone MUST be at least
minimally compliant and even then some things, such as secure
CNAMEs, will not work without full compliance.
Full server compliance adds the following to basic compliance:
(1) ability to read SIG, KEY, and NXT RRs in zone files and (2)
ability, given a zone file and private key, to add appropriate SIG
and NXT RRs, possibly via a separate application, (3) proper
automatic inclusion of SIG, KEY, and NXT RRs in responses, (4)
suppression of CNAME following on retrieval of the security type
RRs, (5) recognize the CD query header bit and set the AD query
header bit, as appropriate, and (6) proper handling of the two NXT
RRs at delegation points. Primary servers for secure zones MUST
be fully compliant and for completely successful secure operation,
all secondary, caching, and other servers handling the zone SHOULD
be fully compliant as well.
Eastlake & Kaufman Standards Track [Page 36]
RFC 2065 DNS Security Extensions January 1997
8.2 Resolver Conformance
Two levels of resolver compliance are defined:
A basic compliance resolver can handle SIG, KEY, and NXT RRs when
they are explicitly requested.
A fully compliant resolver (1) understands KEY, SIG, and NXT RRs,
(2) maintains appropriate information in its local caches and
database to indicate which RRs have been authenticated and to what
extent they have been authenticated, (3) performs additional
queries as necessary to attempt to obtain KEY, SIG, or NXT RRs
from non-security aware servers, (4) normally sets the CD query
header bit on its queries.
9. Security Considerations
This document describes technical details of extensions to the Domain
Name System (DNS) protocol to provide data integrity and origin
authentication, public key distribution, and optional transaction and
request security.
It should be noted that, at most, these extensions guarantee the
validity of resource records, including KEY resource records,
retrieved from the DNS. They do not magically solve other security
problems. For example, using secure DNS you can have high confidence
in the IP address you retrieve for a host name; however, this does
not stop someone for substituting an unauthorized host at that
address or capturing packets sent to that address and falsely
responding with packets apparently from that address. Any reasonably
complete security system will require the protection of many
additional facets of the Internet.
Eastlake & Kaufman Standards Track [Page 37]
RFC 2065 DNS Security Extensions January 1997
References
[NETSEC] - Network Security: PRIVATE Communications in a PUBLIC
World, Charlie Kaufman, Radia Perlman, & Mike Speciner,
Prentice Hall Series in Computer Networking and
Distributed Communications 1995.
[PKCS1] - PKCS #1: RSA Encryption Standard, RSA Data Security,
Inc., 3 June 1991, Version 1.4.
[RFC1032] - Stahl, M., "Domain Administrators Guide", RFC 1032,
November 1987.
[RFC1033] - Lottor, M., "Domain Administrators Operations Guide",
RRFC 1033, November 1987.
[RFC1034] - Mockapetris, P., "Domain Names - Concepts and
Facilities", STD 13, RFC 1034, November 1987.
[RFC1035] - Mockapetris, P., "Domain Names - Implementation and
Specifications", STD 13, RFC 1035, November 1987.
[RFC1305] - Mills, D., "Network Time Protocol (v3)", RFC 1305, March
1992.
[RFC1321] - Rivest, R., "The MD5 Message-Digest Algorithm", RFC 1321,
April 1992.
[RFC1530] - Malamud, C., and M. Rose, "Principles of Operation for
the TPC.INT Subdomain: General Principles and Policy",
RFC 1530, October 1993.
[RFC1750] - Eastlake, D., Crocker, S., and J, Schiller, "Randomness
Requirements for Security", RFC 1750, December 1994.
[RFC1825] - Atkinson, R., "Security Architecture for the Internet
Protocol", RFC 1825, August 1995.
[RSA FAQ] - RSADSI Frequently Asked Questions periodic posting.
Eastlake & Kaufman Standards Track [Page 38]
RFC 2065 DNS Security Extensions January 1997
Authors' Addresses
Donald E. Eastlake 3rd
CyberCash, Inc.
318 Acton Street
Carlisle, MA 01741 USA
Telephone: +1 508-287-4877
+1 508-371-7148(fax)
+1 703-620-4200(main office, Reston, Virginia, USA)
EMail: dee@cybercash.com
Charles W. Kaufman
Iris Associates
1 Technology Park Drive
Westford, MA 01886 USA
Telephone: +1 508-392-5276
EMail: charlie_kaufman@iris.com
Eastlake & Kaufman Standards Track [Page 39]
RFC 2065 DNS Security Extensions January 1997
Appendix: Base 64 Encoding
The following encoding technique is taken from RFC 1521 by N.
Borenstein and N. Freed. It is reproduced here in an edited form for
convenience.
A 65-character subset of US-ASCII is used, enabling 6 bits to be
represented per printable character. (The extra 65th character, "=",
is used to signify a special processing function.)
The encoding process represents 24-bit groups of input bits as output
strings of 4 encoded characters. Proceeding from left to right, a
24-bit input group is formed by concatenating 3 8-bit input groups.
These 24 bits are then treated as 4 concatenated 6-bit groups, each
of which is translated into a single digit in the base 64 alphabet.
Each 6-bit group is used as an index into an array of 64 printable
characters. The character referenced by the index is placed in the
output string.
Table 1: The Base 64 Alphabet
Value Encoding Value Encoding Value Encoding Value Encoding
0 A 17 R 34 i 51 z
1 B 18 S 35 j 52 0
2 C 19 T 36 k 53 1
3 D 20 U 37 l 54 2
4 E 21 V 38 m 55 3
5 F 22 W 39 n 56 4
6 G 23 X 40 o 57 5
7 H 24 Y 41 p 58 6
8 I 25 Z 42 q 59 7
9 J 26 a 43 r 60 8
10 K 27 b 44 s 61 9
11 L 28 c 45 t 62 +
12 M 29 d 46 u 63 /
13 N 30 e 47 v
14 O 31 f 48 w (pad) =
15 P 32 g 49 x
16 Q 33 h 50 y
Special processing is performed if fewer than 24 bits are available
at the end of the data being encoded. A full encoding quantum is
always completed at the end of a quantity. When fewer than 24 input
bits are available in an input group, zero bits are added (on the
right) to form an integral number of 6-bit groups. Padding at the
end of the data is performed using the '=' character. Since all base
64 input is an integral number of octets, only the following cases
Eastlake & Kaufman Standards Track [Page 40]
RFC 2065 DNS Security Extensions January 1997
can arise: (1) the final quantum of encoding input is an integral
multiple of 24 bits; here, the final unit of encoded output will be
an integral multiple of 4 characters with no "=" padding, (2) the
final quantum of encoding input is exactly 8 bits; here, the final
unit of encoded output will be two characters followed by two "="
padding characters, or (3) the final quantum of encoding input is
exactly 16 bits; here, the final unit of encoded output will be three
characters followed by one "=" padding character.
Eastlake & Kaufman Standards Track [Page 41]