💾 Archived View for mirrors.apple2.org.za › archive › ground.icaen.uiowa.edu › Faqs › Formatted › Cs… captured on 2023-11-04 at 18:24:29.

View Raw

More Information

⬅️ Previous capture (2023-01-29)

-=-=-=-=-=-=-

Apple II Frequently Asked Questions: Main Hall 1 ... Start Here!

Csa2 FAQs-on-Ground ref: Csa21MAIN1.txt  rev086 May 2005



The Csa2 (comp.sys.apple2) Usenet newsgroup Apple II FAQs and Resource
 files originate from the Ground Apple II archive, 1997-2005.
 Ground Apple II Administrator: Steve Nelson

 ftp://ground.ecn.uiowa.edu/apple2/Faqs/
 ftp://ground.ecn.uiowa.edu/apple2/Faqs/Formatted/

 Note: FAQs files in the main folder on Ground are pure Text files
 which have no Font, Color, etc. formatting and no set line length.
 This makes them ideal for printing out or for viewing via an ftp
 client which places the content in a text viewer such as WordPad.

 Text in the "Formatted" folder is line-length formatted for
 convenient on-line perusing via Netscape, etc..


Mirrors- GS WorldView (formatted Text) also maintains copies 
 of the FAQs Resource files.
 http://apple2.org.za/gswv/a2zine/faqs/

 Text and HTML-ized Text versions are maintained by FAQs mirrors
 around the world-- ref. the news.answers pure Text MIT archive.
 ftp://rtfm.mit.edu/pub/usenet/comp.sys.apple2/
 
Note: To correctly view tables and diagrams in Text files, use
a fixed spacing Font such as CoPilot or PCMononspaced (IIgs)
or Roman 12cpi (PC).


The HTML version of the FAQs is maintained on the II Computing site.
 http://home.swbell.net/rubywand/A2FAQs1START.html

____________________________





                   Csa2 Apple II FAQs Main Hall

                  Revision 085 Update: 1 May 2005


     Welcome to the comp.sys.apple2 newsgroup Frequently Asked Questions!
This file is called "Main Hall" because it's your starting-off point for
accessing the Apple II FAQs.

     You can peruse a listing of all FAQs questions in Main Hall-2; OR,
you can check out some 'getting started' and 'what's where?' 
Questions & Answers here.

     There have been a few revisions since the April 1, 2005 release.
Beside the usual updates to site listings, these include additions to the
Error List FAQs.

     Thanks to those who have suggested modifications and posted answers
or sent contributions which have been incorporated.


Best wishes to all Apple II users! 

Jeff Hurlburt, 1 May 2005
rubywand@swbell.net




General Apple II and Getting Started Q&A

 001- What is a FAQ?
 002- What is comp.sys.apple2 and how can I read/post messages there?
 003- What software do I need to get started and how do I get it?
 004- How and where do I download and upload Apple II files?
 005- Where can I get Apple II information, software, books, and parts?
 006- What is an Apple II: The KIM
 007- What is an Apple II: The Apple I
 008- What is an Apple II: The Apple ][ and Apple ][+
 009- What is an Apple II: The "Black Apple"
 010- What is an Apple II: The Apple //e
 011- What is an Apple II: The Apple //c and IIc+
 012- What is an Apple II: The Laser 128EX and 'EX/2
 013- What is an Apple II: The Apple IIgs
 014- What is an Apple II: The Apple IIe Emulation Card
 015- What is an Apple II: The Trackstar Apple II Emulation Card
 016- What is an Apple II: Emulators
 017- Apple "][", "Apple II", "Apple //"-- which is correct?
 018- What is "8 bit" and "16 bit"?
 019- How can I tell what version my computer is?
 020- Suppose I just want to start using my Apple II Now!?
 021- Where do I find out about Apple II users' groups?
 022- How can I find out more about using and programming my Apple II?
 023- Where can I find out about Apple II developers?






001- What is a FAQ?

     A "FAQ" is a "Frequently Asked Question". The Csa2 FAQs is a collection of
topics files and resource files which seeks to supply answers to questions
about the Apple II series of computers and Apple II computing. --Rubywand

____________________________



002- What is comp.sys.apple2 and how can I read/post messages there?


     Comp.sys.apple2 (Csa2) is a USENET newsgroup. Messages posted to these
newsgroups spread to many thousands of servers and millions of readers
throughout the world.

     Most Internet Service Providers support posting and reading newsgroup
messages via popular browsers like Netscape and Internet Explorer. A few
internet sites also provide free access to newsgroups and allow posting
messages. Two are Google and Mailgate. Google also allows searching for
information in an archive of newsgroup messages which goes back to 1981. (For
links see Q&A 001 in MAINHALL4.txt.)

     There are several newsgroups in the Csa2 and related families, all
concerned with Apple II series affairs. They provide a forum for users to
compare notes, ask questions, and share insights.


comp.sys.apple2 (Csa2)       - Discussion plus questions & answers
                               relating to all Apple II computers

comp.sys.apple2.comm         - Communications and networking related
                               issues

comp.sys.apple2.gno          - Discussion of GNO/ME, a UNIX-like
                               multi-tasking environment for IIgs

comp.sys.apple2.marketplace  - Buying, selling, and promoting
                               Apple II and related products

comp.sys.apple2.programmer   - Discussion relating to any aspect of
                               programming the Apple II

comp.sys.apple2.usergroups   - Discussion relating to Apple II
                               users' groups

comp.binaries.apple2         - Public Domain software, shareware, and
                               freeware for Apple II's in Text-encoded
                               (binscii) form.

comp.emulators.apple2        - The unofficial 'Apple II games stuff'
                               newsgroup features discussions of
                               Apple II games as well as of Apple II
                               emulation on PC, Mac, and other
                               platforms.

comp.sources.apple2          - A newsgroup for the posting of Apple II
                               source code

alt.emulators.ibmpc.apple2   - Discussion about the use of Apple II
                               emulation software/hardware on a PC.


--David Kopper, Dan DeMaggio, David Empson, Al Kalal, Rubywand

____________________________



003- I'm an Apple II beginner. What software does a newbie need
     to get started and how do I get it?

     If you bought an Apple II with no software at all, then, at the very
least, you will need to get diskettes which boot DOS 3.3 and ProDOS (which
pretty well means you need to have a disk drive). Here is a listing of basic
stuff to get ...

o- DOS 3.3: DOS 3.3 is an old but a good operating system for software on 5.25"
diskette. There is a _lot_ of Apple II software on DOS 3.3 diskettes. To write
and save programs, etc. under DOS 3.3 you want a disk which boots DOS 3.3 and
lets you get to a BASIC prompt. Once in BASIC after booting DOS you will be
able to CATALOG the diskette, and LOAD, RUN, SAVE, ... programs. DOS 3.3
commands are described in more detail in the Csa2DOSMM Q&A.

Commercial game disks often do not allow you to get to a BASIC prompt. Disks
with programs from other users, software from Apple user groups, and copies of
Apple's System Master disks will, usually, let you get to BASIC either by
exiting a program or by doing a Reset. (See Q&A 020 below for more about this.)

o- ProDOS: Practically all of the above applies to ProDOS. ProDOS is the newer
Apple II DOS which allows having sub-directories. It works with 5.25" and 3.5"
diskettes as well as hard disks and other large media. (See Csa2DOSMM Q&A for
more about ProDOS.)

Note: Diskettes used with an Apple II should be double-density (DD) diskettes.
High-density (HD) diskettes sold for PC's will not work reliably in Apple II
disk drives.

o- Copy II Plus: This is the standard general purpose disk/file management
utility. Good versions for working with both DOS 3.3 and ProDOS disks are
Version 7.1 and 7.2.

o- A telecom utility: an Apple II telecom utility (e.g. ZLink, ProTerm, ...)
together with a serial interface board (or built-in serial port) lets you
transfer the Apple II files you download on the net from your PC or Mac to your
Apple II.

o- ShrinkIt: Most Apple II files are maintained on the net as shrinked files
(.shk files) or on shrinked disks (.sdk files). ShrinkIt v3.4 is the standard
utility for unshrinking these files; it requires a 128k Apple IIe or later
Apple II. Earlier versions of ShrinkIt work on Apple II's with less than 128k
memory.


     Aside from Apple II user friends, there are many places you can get the
above, as well as all sorts of other Apple II utility, game, etc. software:

1. Apple II Users' Groups maintain software libraries of utility and games
diskettes you can copy. (See Csa2USERGRP.txt.)

2. Some schools and universities have Apple II areas where you can copy system
and utility diskettes.

3. Many sellers of original and second-hand software advertise on the
comp.sys.apple2.marketplace newsgroup and/or maintain web sites you can browse.
Be sure to check the listing of vendors presented later on.

4. If requested via email, regular posters to Csa2 will often send one or more
'getting started' diskettes which will boot DOS 3.3 and/or ProDOS and which
include some copy, telecom, etc. utilities plus games. (Expect to pay mailing
and materials costs.)

5. The Apple II archive sites listed below maintain large collections of
software which you can download via PC or Mac and transfer to your Apple II.

--Rubywand

____________________________



004- How and where do I download and upload Apple II files?

     How: By far, the easiest and quickest way is to access software sites on
the net using a PC or Mac. Files can be moved to and from your Apple II via a
NULL modem connection with the net computer. If you use a Mac, you may have the
option of transferring the files via a ProDOS or HFS diskette or an HFS Zip
disk. (For details on hardware, file transfers, downloading, and uploading, see
the Telecom-1 and Telecom-2 Q&A.)

     Where: Today, most users upload software, info files, etc. to one or more
of the major Apple II ftp software archive sites. Other options include
comp.binaries.apple2 and BBS systems. The software archive sites are good
places from which to download software. In addition, some software vendors,
developers, and Apple Computer make software available for download at their
sites.

--Rubywand

____________________________



005- Where can I get Apple II information, software, books,
     magazines, and hardware?

     A good place to look is Csa21MAIN3.txt ("Main Hall-3: Apple II Web Sites")
...

For places to buy systems, parts, boards, and software, see Q&A 005.
 Or, see http://home.swbell.net/rubywand/A2FAQs3VENDORS.html

For places to get books and periodicals, see Q&A 006.
 Or, see http://home.swbell.net/rubywand/A2FAQs3VENDORS.html#021

For places to get Apple II information and software on the net, see general
and/or game-specific Q&A.
 Or, see http://home.swbell.net/rubywand/A2FAQs4MAJORSITES.html
 or http://home.swbell.net/rubywand/A2FAQs7GAMESITES.html


     If you are looking for a specific piece of utility or system software,
check Csa21MAIN4.txt ("Main Hall-4: Get It- Links to popular software
packages") ...

For links to File handling utilities, see Q&A 001.
 Or, see http://home.swbell.net/rubywand/Csa2FLUTILS.html

For links to Telecom wares, see Q&A 002.
 Or, see http://home.swbell.net/rubywand/Csa2T1TCOM.html

For links to System software, see Q&A 003.
 Or, see http://home.swbell.net/rubywand/Csa2DOSMM.html
 or http://home.swbell.net/rubywand/Csa2APPLICS.html
 or http://home.swbell.net/rubywand/csa2pfaq.html


     For links to specific emulator packages, check Csa2APPLICS.txt
("Applications") Q&A 003; or, see 
http://home.swbell.net/rubywand/Csa2APPLICS.html#003 .


--Rubywand

____________________________



006- What is an Apple II: KIM and SYM

My Ex bought a KIM in ... had to be 1976, 'cause that's the year we
split. He played Hunt the Wumpus on it. I couldn't see the point of
messing with those red LEDs at the time.

Nancy Crawford,  Csa2 post on 27 December, 1995


     KIM (for "Keyboard Input Monitor") was a 6502 'development system' release
in 1976 by MOS Technology. A single board with six 7-segment LED displays, it
soon had a wide following of avid experimenters who wrote programs like Jim
Butterfield's "Lunar Lander" and Stan Ockers's "Hunt the Wumpus" and published
numerous articles in magazines like Byte and KiloBaud describing hardware
add-ons.

     Another 6502 based board was SYM from Synertek Systems. It arrived two
years after KIM near the end of the 'computer experimenter' era. SYM offered a
speaker and more extensive interfacing capability, including support for a CRT
display.

     KIM and, to a lesser extent, SYM, were the introductions to 6502 computing
which would, in a few years, lead many to become Apple II users. -- Rubywand
and Tim Aaronson

____________________________


Related FAQs Resources: R010APPLE1.GIF (gif picture file)

007- What is an Apple II: The Apple 1

     The original Apple was not much more than a board.  You had to supply your
own keyboard, monitor and case. It sold for $666.66, but now they are worth
much more as a collector's item.

     For Apple 1 pics and more information, ...

Applefritter Apple 1 Owners Club 
  http://www.applefritter.com/apple1/index.html 

Dr. Tom's Apple 1 Pics and Info
  http://apple2.org.za/gswv/gsezine/GS.WorldView/@APPLE.HISTORY/
  Faqs Resource File R010APPLE1.GIF at ...
  ftp://ground.ecn.uiowa.edu/apple2/Faqs/R010APPLE1.GIF


--Dan DeMaggio, Charles T. Turley

____________________________


008- What is an Apple II: The Apple ][ and Apple ][+

     The II and II+ are the computers that launched the Apple II line. They
have the 6502 microprocessor, ability to do Hires and Lores color graphics,
sound, joystick input, and cassette tape I/O. They have a total of eight
expansion Slots for adding peripherals such as the Disk ][ controller,
MockingBoard, serial I/O, and printer interface. Clock speed is 1MHz and, with
Apple's Language Card installed, standard memory size is 64kB.

     The distinction between the ][ and ][+ is the installed ROMs. The ][
starts you in the Monitor program and includes in-ROM Integer BASIC. The ][+
has the AutoStart ROM which tries to locate and boot a diskette upon startup
and defaults to Applesoft BASIC which is included in-ROM. Many ][ owners
upgraded to the ][+ ROMs.

     Apple ][ and ][+ computers can run thousands of games, utilities, and
other programs created to run under Apple DOS-- chiefly, DOS 3.3. Both machines
can, also, run under ProDOS through v1.9 so long as the software does not
require features of an "enhanced" 128k IIe. For instance, you can run
Appleworks if you have more than 128K RAM installed and a program called
PlusWorks. However, the ][ can not run BASIC programs under ProDOS since
Applesoft must be in ROM.

Recommended configuration: 16K "language card" (in Slot 0), an 80-column video
card (not the same as a //e Extended 80-column card), shift key modification (a
wire running from shift key to game port), modified character ROMs to display
lower case, composite color monitor, Disk ][ controller card, two 5.25" Disk ][
or compatible drives, parallel printer interface card, and parallel-interface
printer. You can add memory beyond 64k in various ways, but many programs that
"require 128K" probably will not work, no matter how much RAM you have. You can
also add accelerators like the SpeeDemon or Rocket/Zip. --Dan DeMaggio, David
Empson, Rubywand


____________________________


009- What is an Apple II: The "Black Apple"

     Bell & Howell marketed the "Black Apple" made by Apple. It is an Apple II+
done in black with some extra audio/video connections to fit with projectors,
etc. made by B&H-- mainly for use in the classroom. A nice feature is the
"handle" attached to the back. It contains a few power outlets, allowing the
CPU, Monitor, etc., to be controlled with one switch. Evidently, 5000-10,000
units were produced. --Coaxial, Mike McGovern, Rubywand


____________________________


010- What is an Apple II: The Apple //e

     The //e comes in two flavors: Enhanced and unenhanced. When you start your
computer, the unenhanced IIe displays "Apple ][" at the top of screen; the
Enhanced IIe displays "Apple //e". Apple made an Enhancement kit to upgrade an
unenhanced to Enhanced by replacing 4 chips (CPU [65C02], Video ROM
[MouseText], and new Monitor/Applesoft ROMs). Apple Resource Center sells a IIe
Enhancement kit for $20.00.

     The current IIe operating system is ProDOS-8. (The IIe can also run DOS
3.3, earlier DOS's, and Pascal.) A lot of ProDOS software requires an Enhanced
//e, and sometimes 128K, too.

     A IIe Enhancement Kit does not include any extra RAM. You can expand a 64k
IIe to the standard 128k required for a fully Enhanced IIe via an Extended
80-column card. It plugs into the Aux Connector on the motherboard. Alltech
($19.00), and MC Price Breakers ($14.95) sell such cards.

     Except for being able to type and display lower-case characters, the
unenhanced IIe is very similar to the II+. A 128k Enhanced IIe adds a number of
features including 80-column firmware and 16-color double-lores and
double-hires display capability.


     The Apple //e remains useful for four major reasons:

 1) It runs AppleWorks, a simple to use, yet sophisticated Spreadsheet/Word
Processor/Database.

 2) It can run many games and other entertainment software products.

 3) There are many Apples in schools-- an example is Louis Cornelio's room at
Clairemont High School ( http://www.n2.net/clairemont/ )-- so there is a ton of
Apple II educational software.

 4) It is was and will always be a _Personal_ computer.  You can learn as
little or as much as you want, and nothing stops you from learning about every
nook and cranny in it. Ask any big name programmer in MS/DOS or Mac where they
learned to program.  Most of them taught themselves on a good ol' Apple II.

Recommended configuration: Extended 80 Column card (gives you 128K) or RamWorks
(512K to 1MB RAM), Enhancement kit (for unenhanced IIe), and a composite color
monitor which can display decent 80-column text, Super Serial card, Disk ][
controller card, two 5.25" Disk ][ or compatible drives, parallel printer
interface card, and parallel-interface printer. A Hard Drive is recommended if
you use a lot of different programs. Heavy Appleworks users should add the hard
disk, extra RAM, and a 4MHz or better accelerator (like the Rocket Chip, Zip
Chip or TransWarp). --Dan DeMaggio, Rubywand

____________________________


011- What is an Apple II: The Apple //c and IIc+

     The //c and IIc+ are compact 'luggable' versions of an Enhanced //e, with
many built-in 'cards'. Included are 2 serial ports, a mouse port, a disk port
and 128K of RAM. Support for the original Apple cassette tape I/O is gone. The
//c has a built-in 5.25" drive while the IIc+ has a built-in 3.5" drive.

     The IIc+ has a built-in accelerator that runs at 4MHz (vs. the //c's 1MHz)
making it the fastest Apple II as well as faster than any of the A2 clones. (To
boot your IIc+ at 'regular', 1MHz, speed, include the Escape key in the usual
boot keypresses-- i.e. OpenApple-CTRL-ESC-RESET.) The IIc+, which was
introduced after the IIgs, also allows daisey chaining the GS Apple 3.5" drive
along with 5.25" drives.

     The //c and IIc+ run just about all of the DOS 3.3, ProDOS, "128k"
software, etc. that an Enhanced //e runs plus the few //c-only software
releases. However, the use of certain locations for storing system variables
and ROM differences means that //c series machines will not run a number of old
games designed for the ][ and ][+ which the IIe and IIgs will run.

     Even though //c machines don't have slots, you can still add extra memory
(there's room under the keyboard) and a hard drive (through the disk port-- a
bit slow by ordinary standards, but usable.  Hard to find though.. Was made by
Chinook). There is also a for-//c "D" version of MockingBoard you can plug in
to get much improved sound and music from software supporting the board, and a
module you can attach to convert output to RF for using a TV as a monitor.

Recommended configuration: A composite color monitor which can display decent
80-column text, 1 MB RAM, and, maybe, a hard drive. For the //c, add a second
5.25" drive; for the IIc+, add a second 3.5" drive and two 5.25" drives. --Dan
DeMaggio, Rubywand

____________________________


012- What is an Apple II: The Laser 128EX and 'EX/2

     While not made by Apple, these Lasers can run just about anything that an
Enhanced //e can run. They are as luggable as a //c and include built-in
'cards'. They are also fast; the entire motherboard runs at 3.6MHz. If you want
to use a card in the single expansion Slot, you may have to disable the
internal UDC (for 3.5" drives) or the internal 1MB memory expansion.

     Unlike the EX model, which supports one additional disk drive, the EX/2
supports as many daisy chained drives as a IIgs and has a built in BRAM control
panel for saving settings. The EX/2 also has a built in 3.5" disk drive, a MIDI
port, and a video port which can support analog RGB and digital CGA monitors as
well as an LCD display. --Supertimer, Dan DeMaggio

____________________________



Related FAQs Resources: R024GSSPECS.txt (text file)
Related FAQs Resources: R002WOZGS.GIF (gif picture file)

013- What is an Apple II: The Apple IIgs

     The IIgs (or "GS") represents a giant leap in the Apple II line.  It's
65C816 microprocessor can switch to 6502-emulation  mode for running 8-bit
Apple II software favorites, while, in native mode, it runs 16-bit GS
applications. GS delivers  new super-hires graphics modes, a toolbox in ROM, a
32-oscillator Ensoniq sound chip, and a max base speed of 2.8MHz. Base RAM
memory is 256kB (ROM-01) or 1MB (ROM 3) expandable up to 8MB.

     GS built-ins include modem and printer serial ports good for up to 230k
baud, Disk Port supporting two 5.25" and two 3.5" (800k) drives, RGB and
composite video outputs, enhanced and 'old Apple' sound, ADB bus for keyboard
and mouse, game port supporting two two-button joysticks, clock/calendar, and
battery RAM to retain user settings accessible via the Control Panel. (To get
to the Control Panel press OpenApple-Control-Escape and select "Control
Panel".) There is more about Apple IIgs specifications in the FAQs resource
file R024GSSPECS.txt.

     The IIgs can run DOS 3.3, ProDOS, Pascal, and any other OS the earlier 8-
bit models can run. In 8-bit or "emulation" mode, it works much like an
enhanced //e, even down to supporting nearly all of the old monitor routines
and softswitches. One notable difference is that users must go to 64k Bank $FF
(e.g. FF/F800 - FF/FFFF) to view monitor ROM contents. In the default (Bank
$00) area, an F800L etc. monitor command shows code in the "Language Card" RAM.
Like the //c series, it does not support the original Apple cassette tape I/O.

     GS is the only A2 machine which can run GS/OS. GS/OS and Toolbox routines
make it possible for the System Finder program to deliver a sophisticated
'mouse and windows' environment which looks very much like PC's Windows. The
current version of System is System 6.0.1.

     The first GS's were released in the Fall of 1986. The batches produced
until mid-late 1987 became known as "ROM 00" machines after release of the "ROM
01" models. When you turn ON or force restart a ROM-01 GS, the startup screen
shows "ROM Version 01"; on a ROM-00 GS the startup screen says nothing about
ROM version. (Press OpenApple-Control-Reset to do a forced restart.)

     The original GS's came in cases marked "Limited Edition" with Steve
Wozniak's signature. Often, these are referred to as "Woz GS's". (See FAQs
resource file R002WOZGS.GIF for a picture.) Only about 50,000 ROM-00 IIgs's had
the "Woz" signature. A relatively small number of users chose Apple's option to
upgrade their //e's with a motherboard swap. Introduced in early 1987, the
upgrade included "IIgs" labels which users could substitute for "//e" in the
case insert.

     At the time of the ROM-01 change-over in 1987, Apple supplied a ROM-00-
to-ROM-01 upgrade service free. It consists of swapping in a new ROM and a new
Video Graphics Controller ("VGC") IC. ROM-00 machines which have not had the
upgrade can not run modern GS software-- the ROM must be upgraded. Alltech
(760-724-2404; http://allelec.com ) is a good place to check for a ROM-01
'upgrade kit' consisting of the 01 ROM. (Price: around $30.00)

     The VGC upgrade is not required for software compatibility, and is not
needed for all machines anyway. It is supposed to fix cosmetic problems in
monochrome double-hires graphics mode (pink flickering or fringing on what is
supposed to be a black and white screen).  On some machines the VGC swap also
fixes some color combination problems in 80-column text mode.

Note: ROM-00 machines can boot disks which start System up through Version 3.
(Booting these disks typically starts by displaying some version of "ProDOS
16".) The downside, of course, is being unable to boot modern versions of
System and use software which needs to run under the later versions. On the
other hand, a number of very early products run under versions of System which
have no patches for ROM-01 or ROM 3. Original diskettes for these products will
boot correctly only on a ROM-00 GS.

     Whether via the upgrade or original purchase of a newer GS, by late 1987
nearly all GS users were 'on the same page'. That is, we had the ROM-01
platform with its base 256kB RAM plus the official Apple 1MB Expansion Memory
Board plugged into the Memory Expansion Slot for a total of 1.25MB of fully-
accessible system RAM. For the next couple of years, practically all GS
software was designed to launch from 3.5" diskette under "ProDOS-16" and to fit
within the 1.25MB of RAM everyone was assumed to have installed.

     In 1989 Apple introduced the "ROM 3" GS-- the startup screen shows "ROM
Version 3". (No ROM-02 GS was ever released). The only major improvement over
ROM-01 is more base RAM-- you get 1MB instead of 256kB. This is a very nice
benefit. It means that a ROM 3 with a 4MB Mem Exp Board will have 5MB of fully
accessible RAM whereas a ROM-01 can have 4.25MB of fully-accessible RAM. In
effect, the ROM 3 owner gets a 'free' 800kB RAM disk.

     As Mitch Spector notes in his listing of ROM 3 features (in the "Hardware
Hacking" FAQs), the newer GS offers a number of other nice pluses with the only
significant minus being incompatibility with a few older GS programs and
pre-System 5 versions of GS System. Chiefly, ROM 3 is a 1989 re- do of ROM-01
featuring more streamlined hardware and more built-in firmware.

     Since System 5, booting GS System applies in-RAM patches matched to ROM
version 1 or 3. The patches, located in System/System.Setup/, are TS2 for ROM-
01 and TS3 for ROM 3. This achieves nearly identical operation.

     Very few ROM-01 owners felt any urge to move to ROM 3. Even today, the
vast majority of installed GS's are ROM-01 machines.

     The 1990's saw wide adoption of four major GS enhancements:

OS- After years of foot dragging, Apple finally produced a decent 16-bit GS
operating system with release of System 5.0. Within a few years this evolved
into today's System 6 (System 6.0.1). System 6 has won wide acceptance as a
relatively stable OS which, at last, allows GS users to access many of the
features of GS computing promised back in 1986. Although any ROM-01 or ROM 3
IIgs with at least the 1MB Apple Expansion Memory card installed can boot a
fairly decent install of System 6 from diskette, the fact that it is likely to
use at least 800kB of RAM somewhat limits the applications which can be run,
especially on the ROM-01 GS.

Memory- Driven, in part, by the need for more memory to run System 6, 4MB
became the standard size of installed Memory Expansions. Except for school GS's
and GS's taken out of circulation and tucked away in closets, the old Apple 1MB
Expansion Boards have long ago been replaced with boards adding 4MB- 8MB.

Hard Disk- As with memory, the size of newer versions of System supplied a
strong push toward adding a hard disk. Software was becoming larger, too, and
there was so much of it that making everything work from diskette became
impossibly cumbersome. Lower HD prices, attractive SCSI interfaces such as
RamFAST, and low-cost, easy single-card IDE solutions such as the Focus "Hard
Card" and SHH Systeme "Turbo" cards have helped make the hard disk a standard,
expected peripheral on today's GS.

Acceleration- Few commercial software offerings actually sought to push GS
users to higher speeds; and, as a result, users went for years feeling no great
need for Applied Engineering's expensive Transwarp accelerator. The arrival of
Zip Technology's lower cost ZipGS board together with a clear need for more
speed to handle System 6 sparked a nearly overnight 'acceleration revolution'.
Today, an accelerator running at 8MHz or better is considered, very nearly, to
be a necessary IIgs enhancement.

Recommended configuration: ROM-01 or ROM 3 with 4MB or 8MB Memory Expansion
board-- i.e. at least 4.25MB (ROM-01) or 5MB (ROM 3) of total system RAM,
RamFAST SCSI + 120MB or larger SCSI hard disk OR 120MB or larger HD-on-a-card
IDE drive (e.g. Alltech's Focus Hard Card or SHH's Turbo IDE series) with
System 6.0.1 installed, 8MHz/32k TransWarp or 9MHz/32k ZipGS or better
accelerator board, Stereo Card, Imagewriter II printer, two 3.5" and two 5.25"
diskette drives.

A minimum GS system that will run many older wares and still deliver a decent
operating system is a ROM-01 GS with the Apple 1MB Memory Expansion board, two
3.5" drives, at least one 5.25" drive, and  Imagewriter II printer, which boots
System 5.0.4 or System 6.0.1 from 3.5" diskette. --Dan DeMaggio, Rubywand,
David Empson, Supertimer, Randy Shackelford, Hal Bouma

____________________________



Related FAQs Resources: R028LCA2CARD.TXT (text file)

014- What is an Apple II: The Apple IIe Emulation Card

     This is a '//e on a card' plug-in which lets you run Apple II software.
The card fits into Mac LC and some subsequent machines that have the LC
Processor Direct Slot (PDS) and which support 24-bit memory addressing.

     Many of these cards are sold today without documentation. In case you've
just plugged one into your Mac Color Classic, etc., it will help to know that
pressing Command-Control-Escape gets you to the Preferences panel.

     The Apple IIe Emulation Card is actually more like a //c because the card
is not an expandable machine like a //e. There is a place on the back of the
card to plug in a Y-cable to which you can attach a Unidisk 3.5" disk drive
(white, A2M2053) and/or an Apple 5.25" disk drive (platinum, A9M0107) and a
joystick.

     Because the graphics are handled by the Mac, animation may be slow if you
don't have a decent Mac. For more information, see FAQs resource file
R028LCA2CARD.TXT. --Dan DeMaggio, David Empson, Owen Aaland, Edward Floden,
Liam Busey, Phil Beesley, Joan Sander

____________________________



Related FAQs Resources: R022TRKSTAR.TXT (text file)

015- What is an Apple II: The Trackstar Apple II Emulation Card

     A TrackStar is a single board Apple 2 computer that plugs into a PC Clone
with at least one ISA slot or into an IBM PS/2 computer. The most advanced
models, Trackstar E and Trackstar Plus, work like an enhanced 128k //e.

     Trackstar can run Apple II software from virtual "trackstore" disk images,
virtual hard disk, and, with Apple II disk drive plugged, Apple II diskettes.
(With the correct cables, it can use some Apple II diskettes in compatible PC
5.25" drives.)

     For more about Trackstar boards, software, and setup, see FAQs Resource
file R022TRKSTAR.TXT.) --Bill Whitson, Michael Kelsey, Mike "Moose" O'Malley,
Rubywand, Wayne Stewart

____________________________



016- What is an Apple II: Emulators

     An Apple II emulator-- also called an "emu"-- is a program which lets a
PC, Mac, etc. work like an Apple II and run Apple II software. Usually, the
Apple II software is in the form of a "disk image" file-- a kind of virtual
diskette. For more about Apple II emulators and where to get them see Q&A 003
in Csa2APPLICS. --Rubywand

____________________________



017- Apple "][", "Apple II", "Apple //"-- which is correct?

    "][", "II", and "//" tend to be used pretty much interchangeably for any
model of Apple II computer, although, practically speaking, there are a few
usages which may provoke a correction.

    "][" is the original Apple II symbol. It appears on all early II's and
II+'s as well as on the Disk ][ drive. It is, easily, the most attractive and
distinctive II symbol; but, it is also associated with _old_ Apple II 's. The
"//" usage is associated with the c and newer e models.

    "II" is widely accepted as  'okay' for all Apple II models. (And "II" and
"A2" are commonly used for referring to series-wide products, etc. as in "II
software", "A2 programmers", ... .)


     The generally preferred machine designations are ...

Apple ][   or  Apple II for pre-II+ models
Apple ][+  or  Apple II+
Apple IIe  for non-enhanced IIe computers
Apple //e  for 128k enhanced //e computers
Apple //c
Apple IIc+
Apple IIgs or  GS  or best (if you have the fonts for a small "GS")  IIGS

--Rubywand

____________________________



018- What is "8 bit" and "16 bit"?

     Number of bits usually indicates how big a chunk of data a computer's main
microprocessor can manipulate. The Apple IIgs is based on the 65C816
microprocessor and is considered to be a 16-bit machine. Previous Apple ]['s
are based upon pure 8-bit microprocessors such as the 6502 and 65C02. These are
considered to be 8-bit machines. Sometimes II+ or IIe or IIc software is called
"8-bit software".

     The 65C816 is a member of the 6502 family which includes expanded
registers and adds many new commands while retaining the ability to go into 8-
bit mode. So; the GS can run most 8-bit wares designed for older Apple II
machines as well as newer 16-bit wares. Meanwhile, 8-bit machines are pretty
well limited to 8-bit wares. --Rubywand

____________________________



019- How can I tell what version my computer is?

Apple II

     Upon Reset, the original Apple II starts you in the system monitor looking
at the "*" prompt. It allows step execution of machine code and has Integer
BASIC in ROM. The major division between kinds of Apple II is Revision 0 and
Revision 1. The Revision 1 motherboard adds a number of features including a
few which are easily observed:

Power-On Reset: The computer automatically does a Reset when turned On.

More hires colors: To the Black, White, Violet, and Green available on a Rev0
machine, Rev1 adds Blue and Orange.

Color Killer added: Full-text displays are black&white without the color
fringing and tinting you see on Rev0 machines.


Apple II+

     All Apple II+ machines have the Revision 1 or higher motherboard and the
Autostart ROM. On power-up the Apple II+ does a Reset and displays "APPLE ]["
at the top of the screen. If a disk drive is connected, the II+ will try to
boot a diskette. The Apple II+ loses some monitor features (like instruction
stepping) and in-ROM Integer BASIC found in the earlier Apple II; but, it gains
the more powerful Applesoft BASIC in ROM. A II+ Reset normally leaves you in
BASIC looking at the "]" Applesoft BASIC prompt.


Apple IIe

     You can usually tell a IIe from a II or II+ by the nameplate. On models
with the classic Apple II case but no nameplate, you can check the keyboard.
IIe models include a key embossed with the outline of an apple called the
"OpenApple" key located near the bottom left corner of the keyboard. (All later
Apple II's have this key, too; but, they do not look anything like a II, II+,
or IIe).  A few IIe models produced for third parties may have some other
special-logo key in place of OpenApple.

     Within the IIe series, the major division is between Enhanced and
unenhanced IIe models. Look at your computer while booting.  If it says "Apple
][", it is not enhanced. The enhanced computers will say "Apple //e".

     Today, "Enhanced IIe", "//e", and "128k Apple IIe" are used
interchangeably because nearly every Enhanced IIe has an Extended 80-Column
Card plugged into the 60-pin Aux Slot (which adds 64kB of RAM).  Technically,
an Enhanced IIe is defined by the presence of three or four IC's: the 65C02
microprocessor (replaces the 6502), new Character (or "Video") ROM which
includes MouseText characters, and new monitor firmware in ROM.

     If a IIe has the 65C02 microprocessor, it is probably an Enhanced IIe. If
your IIe is not enhanced, you can do the enhancement yourself with an
"enhancement kit" consisting of the four chips you need to swap in.

     The last significant upgrade to the IIe series came in 1987 with the
release of the Extended Keyboard //e. This model is a 128k Enhanced IIe-- it
comes with an Extended 80-Column Card plugged into the Aux Slot-- which adds an
18-key 'numeric keypad'. It also replaces the eight on-motherboard RAM chips
with two 64kx4 IC's; and, it replaces the two BASIC/monitor ROMs with a single
large ROM.

     Quite a lot of later 80's 8-bit software, including all double-hires
software, requires a 128k Enhanced IIe. (If you have a //c, IIc+, IIgs, Laser
128, or Franklin Ace 2000-2200, you have good to at least decent Enhanced IIe
compatibility.)  Unfortunately, a small number of early-release IIe's can not
be upgraded to handle double-hires. Check the serial number on the motherboard
(in the back, by the power-on led). If it is 820-0064-A, you must change the
motherboard to upgrade (unless you have the PAL video output version).

     The IIe was produced in very large numbers and sold around the world in
countries with different power systems using different video standards. So, it
is not all that unlikely that you may need to check a bargain IIe to make sure
it will work in your home using your monitor. The two major video output
formats you may run into are NTSC (used in the US, Canada, Japan, and most
countries with 60Hz power, except Brazil) and PAL (used in Australia, most of
Europe, and most countries with 50Hz power). One way to tell which video
standard a IIe uses is the location of the Aux Slot. If it is on the side of
the motherboard near the power supply, you have an NTSC model. If it is in line
with Slot 3, you have a PAL model.


Apple //c and Apple IIc+

     Go into Basic and type "PRINT PEEK (64447)" and press return.  If it says
255, you have a very old //c. This model is known to have problems producing
accurate baud rates for serial communications. It's been many years since the
//c was released; but, some long-time Apple dealers may still perform the
upgrade for a nominal fee. (Tell the dealer that the Apple authorization number
is ODL660.)

     If PRINT PEEK (64447) displays 0, you can use 3.5" drives, but you don't
have the memory expansion connector. If it says 3, you have the memory
expansion connector and can plug in extra memory. If it says 4, you have the
latest model of the //c with the memory expansion connector and other upgrades.

     If PRINT PEEK (64447) displays 5, you have an Apple IIc+. The IIc+ also
has "IIc Plus" silk-screened in dark gray onto the upper right corner of the
case.


Apple IIgs

     There are 3 major versions of the GS: Check the initial power-up screen.
It will probably say ROM-01 or ROM 3. If it does not say either, you have a
ROM-00 model. You must upgrade a ROM-00 machine in order to run current system
software. The ROM-01 has 256K on the motherboard, while the ROM 3 has 1 MB on
the motherboard. Most of the enhancements of the ROM 3 are added to the ROM-01
simply by booting up with current system software. --Dan DeMaggio, CreatSltn,
Steve Leahy, Nathan Mates, Bevis King, David Empson, Jeff Blakeney, David
Wilson, Rubywand

____________________________



020- Suppose I just want to start using my Apple II Now!?

     Okay; suppose you have zilch info, do not feel like looking through the
FAQs, and want to start Now. The following _may_ be all you need to get going
with some game or utility from diskette:

o The Disk Controller Card for Apple ][, ][+, and IIe goes into Slot 6 (next to
last Slot on the right when viewed from the front). Drive 1 plugs into the top
connector with the ribbon side of the cable plug facing out. Plug in the
cable(s) before plugging in the card so that you are sure the connector and
plug line up correctly.

o On the IIgs, the 3.5" drive(s) plug in first, then, the 5.25" drive(s).

o Unless a hard disk is installed, most Apple II's try to boot a diskette and
start DOS 3.3, ProDOS, or GS/OS when turned ON. (On the old Apple ][ you can
type in 6 Control-P RETURN to boot from the Monitor, assuming your Controller
Card is in Slot 6. To press Control-P, press and hold Control, then P, then
release both keys.)

o Most, but not all, diskettes are bootable. If one diskette doesn't boot, try
another. If no diskettes boot, use a Radio Shack Head Cleaner diskette to clean
the drive head(s).

o If the prompt you see is ], you are in Applesoft BASIC; > indicates Integer
BASIC; and * indicates the Monitor. If both Integer BASIC and Applesoft are in
memory, you can enter FP to switch from Integer to Applesoft and INT to switch
from Applesoft to Integer. To go from either BASIC to the Monitor, enter CALL-
151. To start the current BASIC from the Monitor, enter Control-B. To go back
to BASIC with program and variables in tact from the Monitor, enter Control-C.

o Except for the ][ and most ][+'s, you must press Control-RESET to do a Reset.

o To boot a diskette when viewing a BASIC prompt, you can enter PR#6 to boot a
drive associated with Slot 6-- usually a 5.25" drive-- and PR#5 to boot a drive
associated with Slot 5-- usually a 3.5" drive. --Rubywand, David Empson

____________________________



021- Where do I find out about Apple II Users' Groups?

     Especially for beginners, a user group is an absolute golden of software,
information, and bargain hardware.

     Many Apple II users groups continue to meet, especially in major cities 
and on university campi. If a local group listing is 'missing' from your phone 
book, check for a Mac users group-- a number of Apple II groups have merged
with their Mac counterparts. 

     For more info and links, see Csa2USERGRP.txt or see the links at
     http://home.swbell.net/rubywand/A2FAQs9USERGROUPS.html .

____________________________



022- How can I find out more about using and programming my Apple II?

     You can peruse the newsgroup FAQs Q&A Contents page. You can also check
out the Apple II Major Sites page (Csa21MAIN3.txt). Here are two good 'getting
starting' places:

Apple II Beginner's Guide
  http://Apple2Guide.net/Apple2/

Home of the Apple II
  http://www.callapple.org/apple2/


     All Apple II's come with some version of BASIC installed in-ROM on the
motherboard. The original Apple II's have Integer BASIC. Starting with the II+
model, all Apple II's have floating-point Applesoft BASIC in ROM. Owners of
early Apple II's can load in Applesoft or plug in a card with Applesoft ROMs.

     There are several good places to find out about Apple II BASIC
programming:


Apple II Textfiles
  http://www.textfiles.com/apple/

Byte Works (new IIgs GSoft BASIC)
  http://www.byteworks.org

Ground
  ftp://ground.ecn.uiowa.edu/2/apple2/MiscInfo/Applesoft/
  ftp://ground.ecn.uiowa.edu/apple2/MiscInfo/Programming/
  ftp://ground.ecn.uiowa.edu/2/apple2/apple8/Beagle.Oldies/

Tarnover
  http://tarnover.dyndns.org/

The comp.sys.apple2.programmer newsgroup and Csa2P FAQs
  for programming Q&A plus more links
  http://home.swbell.net/rubywand/csa2pfaq.html


     Besides BASIC, you can load and use many languages including Fortran,
Pascal, Modula, C, Logo, Forth, Assembly, and others. The Apple II "Monitor"
included in-ROM lets you enter 6502 and (on a IIgs) 65816 machine language
programs. IIgs owners can also create Hyperstudio and HyperCard stacks. For
more information and links go to the comp.sys.apple2.programmer FAQs (see URL
above).


     There is really no substitute for having the technical manual for your
particular Apple II or clone. The manual for the ][ and ][+ is the Apple ][
Reference Manual. For the IIe and IIc you want Apple's Technical Reference
Manual for your machine. For the IIgs you will want, at least, the IIgs
Hardware Reference and IIgs Firmware Reference.

     Naturally, you will want to get manuals and materials covering DOS,
ProDOS, BASIC, and many other areas relating to your Apple II. Below is a
decent 'getting started' sampling:


General Apple II

Apple II Reference Manual  from Apple
Apple II User's Guide by Poole, Martin, and Cook
  Note: Third Edition, 1985 (Apple II User's Guide for APPLE II Plus
  and APPLE IIe) is completely revised to include ProDOS coverage
Beagle Bros "Peeks, Pokes, and Pointers" (poster)  by Beagle Bros
The Apple II Circuit Description  by Winston D. Gayler
Understanding the Apple ][  by Jim Sather
What's Where in the Apple II?  by William F. Luebbert


Applesoft BASIC and Assembly Language

Assembly Lines: The Book  by Roger Wagner
BASIC Programming Reference Manual  from Apple
Programming the 65816 Including the 6502, 65C02, and 65802
  by David Eyes and Ron Lichty
65816/65802 Assembly Language Programming by Michael Fischer


DOS, ProDOS, and GS/OS

Apple IIgs GS/OS Technical Reference (Apple/ Addison-Wesley)
Beneath Apple DOS  by Worth & Lechner
Beneath Apple ProDOS  by Worth & Lechner
Exploring Apple GS/OS and ProDOS 8  by Little
ProDOS Inside and Out  by Doms and Weishaar
ProDOS Technical Reference Manual (Apple/ Addison-Wesley)
The DOS Manual  from Apple



     Some technical manuals and other materials can be obtained in original or
reprint form from Byte Works and Kula Soft. Major book sellers, such as Amazon
list many Apple II books. For current Kula Soft, Byte Works, and other seller
links, see Vendors Q&A in Csa21MAIN2.txt or go to ...

http://home.swbell.net/rubywand/A2FAQs3VENDORS.html#020 .

Though most Apple II books are out of print, many sellers will search for and,
with luck, locate the book you want.

     Apple II manuals and other books also turn up for sale on Csa2 newsgroups
like comp.sys.apple2.marketplace, at used book shops, and at local Users Group
swap meets. Some manuals and other items, such as Reference Cards and posters
(usually in Text or HTML form) are available for downloading at the major Apple
II archives and other support sites. (See Q&A 005 above.)

     You may be able to find a local Apple II users' group or a group on-line
that you like. Besides knowledgeable users, you will often find a software
library stocked with useful software. (See Csa2USERGRP.txt.)

     Another good resource is a subscription to an Apple II newsletter or
magazine; and, don't overlook collections of major Apple II magazines published
through the 1980's (e.g. inCider, Nibble, Computist, etc.). They are virtual
encyclopedias covering many areas of II computing. For current publishers and
net sites which offer on-line copies of back issues see Q&A 005 above.


     Often, the easiest, quickest way to an answer for some Apple II question
is to 'just ask it' on comp.sys.apple2 and/or another Csa2 family newsgroup.
There are no Csa2 rules about posting to just a newsgroup which deals with a
particular topic or making sure your question is hard enough or reading the
FAQs first. Supplying information is the main purpose of the newsgroups. --
Rubywand, David Wilson, Tony Cianfaglione, Steve Sanders, Terence J. Boldt,
Wayne Stewart

____________________________



023- Where can I find out about developers of Apple II and II-related
     products?

     For current information on developers and software/hardware products
see ...

GS WorldView's "Developers at Work" pages
 http://apple2.org.za/gswv/a2zine/Sel/A2DevelopersAtWork.htm

Postings on Csa2 newsgroups
 news:comp.sys.apple2

A2Central.com, including "A2 News and Notes" 'zine
 http://www.a2central.com/
 http://lamp.a2central.com/ 


     For information on classic A2 game developers see ...

The Giant List
 http://www.dadgum.com/giantlist/list.html

--Rubywand