💾 Archived View for bbs.geminispace.org › u › gemalaya › 5634 captured on 2024-03-21 at 20:22:44. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2024-02-05)
-=-=-=-=-=-=-
Re: "I've changed a few things in the misfin code: - pass..."
@flipperzero Connection refused on hashnix.club port 1958, either the port is blocked or the cert is wrong. Did you create the cert with "hashnix.club" for the hostname ?
2023-09-27 · 6 months ago
😎 flipperzero · Sep 27 at 13:20:
whenever i try to do "misfin make-cert flipperzero "flip0" hashnix.club title.pem" or "misfin make-cert flipperzero "flip0" ip.v.4.address title.pem" it seems to generate fine enough, but when I run "misfin receive-as title.pem" I get this back.
it seems to be similar to the last time i got this, tho I'm unable to modify the misfin.py file in the python3 dist package .egg
😺 gemalaya [OP] · Sep 27 at 13:34:
@flipperzero Are you sure nothing is listening on port 1958 ? What does "hashnix.club" resolve to ? I see that hashnix.club has an ipv4 and an ipv6 address, so i wonder if this could be the issue, but it shouldn't ..
😺 gemalaya [OP] · Sep 27 at 13:39:
@flipperzero Hhmmm, misfin always uses AF_INET, meaning it will always try to bind an ipv4 address. Can you try changing AF_INET to AF_INET6 in receive_forever() ?
😎 flipperzero · Sep 27 at 15:56:
@gemalaya hmmm I see what you're saying. I'm out this morning atm but once i'm back at my desk i'll give that a go
@flipperzero lmk when you want me to test again
I was able to send to alexlehm@gemini.lehmann.cx from behind IPv4 NAT w/ port forwarding. And steve@k0stk.ddns.net is listening for messages.
Is there a config option for specifying a bind address? To make misfin work for my configuration I had to edit misfin.py to force a bind to my NIC address rather than the certificate hostname.
Thanks for trying to send to me.
The error that is reported on my end is:
Error during receive - here's what we recovered:
(address elided)
UnboundLocalError local variable 'req' referenced before assignment
Aborting due to exception.
Edit: Should have said I am using the gitlab.com/cipress python client with python v3.7.3 (not v2.7.16 as previously stated) and had to patch letter.py to be able to generate a certificate.
Edit 2: Figured out which python version my misfin client is using.
😎 flipperzero · Sep 28 at 05:38:
@gemalaya whats your address? i'll test again, i edited the IP6 field you told me about and its working now.
@satch give the test another go
@BBSman I tried to send you a message but I got this
"Connection to k0stk.ddns.net (port 1958) refused "
Thats because my listener was down for repairs. It is back up now and I've been able to send to it from an external system.
@BBSman my message to you worked
@flipperzero mine to you failed errno 111
😺 gemalaya [OP] · Sep 28 at 19:46:
Added a --ipv6 option as well for "misfin send-as", to force ipv6 in case the remote server listens on an ipv6 address.
😺 gemalaya [OP] · Sep 28 at 19:49:
@flipperzero Don't have any public address. Glad it fixed your problem, you can update and use --ipv6 now ...
I've changed a few things in the misfin code: - pass flake8 test - rename the main package from "transponder" to "misfin" - Add a setup.py: "pip install ." will install all the required dependencies - Add a "misfin" command-line program (it uses the "click" module), everything can be done with this command Git repo link below [https link] misfin gitlab repository (cipres)
💬 gemalaya · 17 comments · 2 likes · 2023-09-26 · 6 months ago