💾 Archived View for gmi.noulin.net › rfc › rfc8668.gmi captured on 2024-08-25 at 09:03:25. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2022-06-12)
-=-=-=-=-=-=-
Internet Engineering Task Force (IETF) L. Ginsberg, Ed.
Request for Comments: 8668 Cisco Systems, Inc.
Category: Standards Track A. Bashandy
ISSN: 2070-1721 Unaffiliated
C. Filsfils
Cisco Systems, Inc.
M. Nanduri
Oracle
E. Aries
Arrcus Inc.
December 2019
Advertising Layer 2 Bundle Member Link Attributes in IS-IS
Abstract
There are deployments where the Layer 3 interface on which IS-IS
operates is a Layer 2 interface bundle. Existing IS-IS
advertisements only support advertising link attributes of the Layer
3 interface. If entities external to IS-IS wish to control traffic
flows on the individual physical links that comprise the Layer 2
interface bundle, link attribute information about the bundle members
is required.
This document introduces the ability for IS-IS to advertise the link
attributes of Layer 2 (L2) Bundle Members.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
https://www.rfc-editor.org/info/rfc8668.
Copyright Notice
Copyright (c) 2019 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction
2. Requirements Language
3. L2 Bundle Member Attributes TLV
3.1. Parallel L3 Adjacencies
3.2. Shared Attribute Sub-TLVs
4. Advertising L2 Bundle Member Adj-SIDs
4.1. L2 Bundle Member Adjacency Segment Identifier Sub-TLV
4.2. L2 Bundle Member LAN Adjacency SID Sub-TLV
5. IANA Considerations
6. Security Considerations
7. References
7.1. Normative References
7.2. Informative References
Appendix A. Example Encoding
Acknowledgements
Contributors
Authors' Addresses
1. Introduction
There are deployments where the Layer 3 interface on which an IS-IS
adjacency is established is a Layer 2 interface bundle, for instance,
a Link Aggregation Group (LAG) [IEEE802.1AX]. This reduces the
number of adjacencies that need to be maintained by the routing
protocol in cases where there are parallel links between the
neighbors. Entities external to IS-IS such as Path Computation
Elements (PCEs) [RFC4655] may wish to control traffic flows on
individual members of the underlying Layer 2 bundle. In order to do
so, link attribute information about individual bundle members is
required. The protocol extensions defined in this document provide
the means to advertise this information.
This document introduces a new TLV to advertise link attribute
information for each of the L2 Bundle Members that comprise the Layer
3 interface on which IS-IS operates.
[RFC8667] introduces a new link attribute, adjacency segment
identifier (Adj-SID), which can be used as an instruction to
forwarding to send traffic over a specific link. This document
introduces additional sub-TLVs to advertise Adj-SIDs for L2 Bundle
Members.
Note that the new advertisements defined in this document are
intended to be provided to external (to IS-IS) entities. The
following items are intentionally not defined and/or are outside the
scope of this document:
* What link attributes will be advertised. This is determined by
the needs of the external entities.
* A minimum or default set of link attributes.
* How these attributes are configured.
* How the advertisements are used.
* What impact the use of these advertisements may have on traffic
flow in the network.
* How the advertisements are passed to external entities.
2. Requirements Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
3. L2 Bundle Member Attributes TLV
A new TLV is introduced to advertise L2 Bundle Member attributes.
Although much of the information is identical to and uses the same
sub-TLVs included in Extended IS Neighbor advertisements (TLVs 22 and
222), a new TLV is used so that changes to the advertisement of the
L2 Bundle Member link attributes do not trigger unnecessary action by
the [ISO10589] Decision Process.
Advertisement of this information implies that the identified link is
a member of the L2 Bundle associated with the identified Parent L3
Neighbor and that the member link is operationally up. Therefore,
advertisements MUST be withdrawn if the link becomes operationally
down or it is no longer a member of the identified L2 Bundle.
This new TLV utilizes the sub-TLV space defined for TLVs 22, 23, 141,
222, and 223.
The following new TLV is introduced:
L2 Bundle Member Attributes
Type: 25
Length: Number of octets to follow
Parent L3 Neighbor Descriptor
L3 Neighbor System ID + pseudonode ID (7 octets)
Flags: 1-octet field of the following flags:
0 1 2 3 4 5 6 7
+-+-+-+-+-+-+-+-+
|P| |
+-+-+-+-+-+-+-+-+
where:
P-Flag: When set to 1, one of the sub-TLVs described in
Section 3.1 immediately follows the flags field.
If the P-Flag is set to 0, then none of the sub-
TLVs described in Section 3.1 are present.
Other bits: MUST be zero when originated and ignored when
received.
One or more L2 Bundle Attribute Descriptors (as defined below).
Length of L2 Bundle Attribute Descriptor (1 octet)
NOTE: This includes all fields described below.
Number of L2 Bundle Member Descriptors (1 octet)
L2 Bundle Member Link Local Identifiers
(4 * Number of L2 Bundle Member Descriptors octets)
NOTE: An L2 Bundle Member Descriptor is a Link Local
Identifier as defined in [RFC4202].
Sub-TLV(s)
A sub-TLV may define an attribute common to all of the bundle
members listed, or it may define an attribute unique to each
bundle member. Use of these two classes of sub-TLVs is
described in the following sections.
NOTE: Only one Parent L3 Neighbor Descriptor is present in a given
TLV. Multiple L2 Bundle Attribute Descriptors may be present in a
single TLV.
3.1. Parallel L3 Adjacencies
When there exist multiple L3 adjacencies to the same neighbor,
additional information is required to uniquely identify the L3
Neighbor. One and only one of the following three sub-TLVs is used
to uniquely identify the L3 adjacency:
* IPv4 Interface Address (sub-TLV 6 defined in [RFC5305])
* IPv6 Interface Address (sub-TLV 12 defined in [RFC6119])
* Link Local/Remote Identifiers (sub-TLV 4 defined in [RFC5307])
When the P-Flag is set in the flags field in the Parent L3 Neighbor
Descriptor, one and only one of the above sub-TLVs MUST be present.
The chosen sub-TLV MUST immediately follow the flags field described
in Section 3.
These sub-TLVs MAY be omitted if no parallel adjacencies to the
neighbor exist.
3.2. Shared Attribute Sub-TLVs
These sub-TLVs advertise a single copy of an attribute (e.g., link
bandwidth). The attribute applies to all of the L2 Bundle Members in
the set advertised under the preceding L2 Bundle Member Attribute
Descriptor. No more than one copy of a given sub-TLV in this
category may appear in the set of sub-TLVs under the preceding L2
Bundle Member Attribute Descriptor. If multiple copies of a given
sub-TLV are present, all copies MUST be ignored.
The set of L2 Bundle Member Descriptors that may be advertised under
a single L2 Bundle Member Attribute Descriptor is therefore limited
to bundle members that share the set of attributes advertised in the
shared attribute sub-TLVs.
All existing sub-TLVs defined in the IANA registry for Sub-TLVs for
TLVs 22, 23, 141, 222, and 223 are in the category of shared
attribute sub-TLVs unless otherwise specified in this document.
4. Advertising L2 Bundle Member Adj-SIDs
[RFC8667] defines sub-TLVs to advertise Adj-SIDs for L3 adjacencies.
However, these sub-TLVs only support the advertisement of a single
Adj-SID. As it is expected that each L2 Bundle Member will have
unique Adj-SIDs in many deployments, it is desirable to define a new
sub-TLV that allows more efficient encoding of a set of Adj-SIDs in a
single sub-TLV. Two new sub-TLVs are therefore introduced to support
advertising Adj-SIDs for L2 Bundle Members. The format of the new
sub-TLVs is similar to that used for L3 adjacencies, but it is
optimized to allow advertisement of a set of Adj-SIDs (one per L2
Bundle Member) in a single sub-TLV.
The two new sub-TLVs defined in the following sections do not fall
into the category of shared attribute sub-TLVs.
4.1. L2 Bundle Member Adjacency Segment Identifier Sub-TLV
This sub-TLV is used to advertise Adj-SIDs for L2 Bundle Members
associated with a parent L3 adjacency that is point-to-point. The
following format is defined for this sub-TLV:
Type: 41 (1 octet)
Length: variable (1 octet)
Flags: 1-octet field of the following flags:
0 1 2 3 4 5 6 7
+-+-+-+-+-+-+-+-+
|F|*|V|L|S|P| |
+-+-+-+-+-+-+-+-+
where:
F-Flag: Address-Family Flag. If unset, then the Adj-SID
refers to an L2 Bundle Member with outgoing IPv4
encapsulation. If set, then the Adj-SID refers to an
L2 Bundle Member with outgoing IPv6 encapsulation.
V-Flag: Value Flag. If set, then the Adj-SID carries a value.
By default, the flag is SET.
L-Flag: Local Flag. If set, then the value/index carried by
the Adj-SID has local significance. By default, the
flag is SET.
S-Flag: Set Flag. When set, the S-Flag indicates that the
Adj-SID refers to a set of L2 Bundle Members (and
therefore MAY be assigned to other L2 Bundle Members
as well).
P-Flag: Persistent Flag. When set, the P-Flag indicates that
the Adj-SID is persistently allocated, i.e., the Adj-
SID value remains consistent across router restart
and/or interface flap.
Other bits: MUST be zero when originated and ignored when
received.
NOTE: The flags are deliberately kept congruent to the flags in
the L3 ADJ-SID defined in [RFC8667]. * indicates a flag used
in the L3 Adj-SID sub-TLV, but one that is NOT used in this
sub-TLV. These bits SHOULD be sent as 0 and MUST be ignored on
receipt.
Weight: 1 octet. The value represents the weight of the Adj-SID
for the purpose of load balancing. The use of the weight
is defined in [RFC8402].
NOTE: Flags and weight are shared by all L2 Bundle Members listed
in the L2 Bundle Attribute Descriptor.
L2 Bundle Member Adj-SID Descriptors:
There MUST be one descriptor for each of the L2 Bundle Members
advertised under the preceding L2 Bundle Member Attribute
Descriptor. Each descriptor consists of one of the following
fields:
SID/Index/Label: According to the V- and L-Flags, it contains
either:
o A 3-octet local label where the 20 rightmost bits are used
for encoding the label value. In this case, the V- and
L-Flags MUST be set.
o A 4-octet index defining the offset in the SID/Label space
advertised by this router. See [RFC8667]. In this case, V-
and L-Flags MUST be unset.
4.2. L2 Bundle Member LAN Adjacency SID Sub-TLV
This sub-TLV is used to advertise Adj-SIDs for L2 Bundle Members
associated with a parent L3 adjacency that is a LAN adjacency. In
LAN subnetworks, the Designated Intermediate System (DIS) is elected
and originates the Pseudonode-LSP (PN-LSP) including all neighbors of
the DIS. When Segment Routing is used, each router in the LAN MAY
advertise the Adj-SID of each of its neighbors on the LAN.
Similarly, for each L2 Bundle Member, a router MAY advertise an Adj-
SID to each neighbor on the LAN.
The following format is defined for this sub-TLV:
Type: 42 (1 octet)
Length: variable (1 octet)
Neighbor System ID: 6 octets
Flags: 1-octet field of the following flags:
0 1 2 3 4 5 6 7
+-+-+-+-+-+-+-+-+
|F|*|V|L|S|P| |
+-+-+-+-+-+-+-+-+
where:
F-Flag: Address-Family Flag. If unset, then the Adj-SID
refers to an L2 Bundle Member with outgoing IPv4
encapsulation. If set, then the Adj-SID refers to an
L2 Bundle Member with outgoing IPv6 encapsulation.
V-Flag: Value Flag. If set, then the Adj-SID carries a value.
By default, the flag is SET.
L-Flag: Local Flag. If set, then the value/index carried by
the Adj-SID has local significance. By default, the
flag is SET.
S-Flag: Set Flag. When set, the S-Flag indicates that the
Adj-SID refers to a set of L2 Bundle Members (and
therefore MAY be assigned to other L2 Bundle Members
as well).
P-Flag: Persistent Flag. When set, the P-Flag indicates that
the Adj-SID is persistently allocated, i.e., the Adj-
SID value remains consistent across router restart
and/or interface flap.
Other bits: MUST be zero when originated and ignored when
received.
NOTE: The flags are deliberately kept congruent to the flags in
the L3 LAN Adjacency SID defined in [RFC8667]. * indicates a
flag used in the L3 Adj-SID sub-TLV, but one that is NOT used
in this sub-TLV. These bits SHOULD be sent as 0 and MUST be
ignored on receipt.
Weight: 1 octet. The value represents the weight of the Adj-SID
for the purpose of load balancing. The use of the weight
is defined in [RFC8402].
NOTE: Flags and weight are shared by all L2 Bundle Members listed
in the L2 Bundle Attribute Descriptor.
L2 Bundle Member LAN Adjacency SID Descriptors:
There MUST be one descriptor for each of the L2 Bundle Members
advertised under the preceding L2 Bundle Member Attribute
Descriptor. Each descriptor consists of one of the following
fields:
SID/Index/Label: According to the V- and L-Flags, it contains
either:
o A 3-octet local label where the 20 rightmost bits are used
for encoding the label value. In this case, the V- and
L-Flags MUST be set.
o A 4-octet index defining the offset in the SID/Label space
advertised by this router. See [RFC8667]. In this case, V-
and L-Flags MUST be unset.
5. IANA Considerations
This document adds the following new TLV to the IS-IS "TLV Codepoints
Registry".
Value: 25
Name: L2 Bundle Member Attributes
The name of the IANA registry for Sub-TLVs for TLVs 22, 23, 141, 222,
and 223 has been changed to include sub-TLV 25. An additional column
has been added to the registry to indicate which sub-TLVs may appear
in the new L2 Bundle Member Attributes TLV. The column for TLV 25
has one of the following three values:
y sub-TLV may appear in TLV 25 but MUST NOT be shared by multiple
L2 Bundle Members
y(s) sub-TLV may appear in TLV 25 and MAY be shared by multiple L2
Bundle Members
n sub-TLV MUST NOT appear in TLV 25
The following table indicates the appropriate settings for all
currently defined sub-TLVs with regard to their use in the new L2
Bundle Member Attributes TLV.
+-------+-------------------------------------------+--------+
| Value | Description | TLV 25 |
+=======+===========================================+========+
| 3 | Administrative group (color) | y(s) |
+-------+-------------------------------------------+--------+
| 4 | Link Local/Remote Identifiers | y(s) |
+-------+-------------------------------------------+--------+
| 6 | IPv4 interface address | y(s) |
+-------+-------------------------------------------+--------+
| 8 | IPv4 neighbor address | y(s) |
+-------+-------------------------------------------+--------+
| 9 | Maximum link bandwidth | y(s) |
+-------+-------------------------------------------+--------+
| 10 | Maximum reservable link bandwidth | y(s) |
+-------+-------------------------------------------+--------+
| 11 | Unreserved bandwidth | y(s) |
+-------+-------------------------------------------+--------+
| 12 | IPv6 Interface Address | y(s) |
+-------+-------------------------------------------+--------+
| 13 | IPv6 Neighbor Address | y(s) |
+-------+-------------------------------------------+--------+
| 14 | Extended Administrative Group | y(s) |
+-------+-------------------------------------------+--------+
| 18 | TE Default metric | y(s) |
+-------+-------------------------------------------+--------+
| 19 | Link-attributes | y(s) |
+-------+-------------------------------------------+--------+
| 20 | Link Protection Type | y(s) |
+-------+-------------------------------------------+--------+
| 21 | Interface Switching Capability Descriptor | y(s) |
+-------+-------------------------------------------+--------+
| 22 | Bandwidth Constraints | y(s) |
+-------+-------------------------------------------+--------+
| 23 | Unconstrained TE LSP Count (sub-)TLV | y(s) |
+-------+-------------------------------------------+--------+
| 24 | remote AS number | n |
+-------+-------------------------------------------+--------+
| 25 | IPv4 remote ASBR Identifier | n |
+-------+-------------------------------------------+--------+
| 26 | IPv6 remote ASBR Identifier | n |
+-------+-------------------------------------------+--------+
| 27 | Interface Adjustment Capability | y(s) |
| | Descriptor (IACD) | |
+-------+-------------------------------------------+--------+
| 28 | MTU | n |
+-------+-------------------------------------------+--------+
| 29 | SPB-Metric | y(s) |
+-------+-------------------------------------------+--------+
| 30 | SPB-A-OALG | y(s) |
+-------+-------------------------------------------+--------+
| 33 | Unidirectional Link Delay | y |
+-------+-------------------------------------------+--------+
| 34 | Min/Max Unidirectional Link Delay | y |
+-------+-------------------------------------------+--------+
| 35 | Unidirectional Delay Variation | y |
+-------+-------------------------------------------+--------+
| 36 | Unidirectional Link Loss | y |
+-------+-------------------------------------------+--------+
| 37 | Unidirectional Residual Bandwidth | y |
+-------+-------------------------------------------+--------+
| 38 | Unidirectional Available Bandwidth | y |
+-------+-------------------------------------------+--------+
| 39 | Unidirectional Utilized Bandwidth | y |
+-------+-------------------------------------------+--------+
| 40 | RTM Capability | n |
+-------+-------------------------------------------+--------+
Table 1
This document adds the following new sub-TLVs to the above registry.
+------+--------------------------+----+----+----+-----+-----+-----+
| Type | Description | 22 | 23 | 25 | 141 | 222 | 223 |
+======+==========================+====+====+====+=====+=====+=====+
| 41 | L2 Bundle Member Adj-SID | n | n | y | n | n | n |
+------+--------------------------+----+----+----+-----+-----+-----+
| 42 | L2 Bundle Member LAN | n | n | y | n | n | n |
| | Adj-SID | | | | | | |
+------+--------------------------+----+----+----+-----+-----+-----+
Table 2
6. Security Considerations
The IS-IS protocol has supported the advertisement of link attribute
information, including link identifiers, for many years. The
advertisements defined in this document are identical to existing
advertisements defined in [RFC4202], [RFC5305], [RFC8570], and
[RFC8667], but are associated with L2 links that are part of a bundle
interface on which the IS-IS protocol operates. There are therefore
no new security issues introduced by the extensions in this document.
As always, if the protocol is used in an environment where
unauthorized access to the physical links on which IS-IS Protocol
Data Units (PDUs) are sent occurs, then attacks are possible. The
use of authentication as defined in [RFC5304] and [RFC5310] is
recommended to prevent such attacks.
7. References
7.1. Normative References
[IEEE802.1AX]
IEEE, "IEEE Standard for Local and metropolitan area
networks -- Link Aggregation", IEEE 802.1AX,
<https://ieeexplore.ieee.org/document/7055197>.
[ISO10589] International Organization for Standardization,
"Information technology -- Telecommunications and
information exchange between systems -- Intermediate
System to Intermediate System intra-domain routeing
information exchange protocol for use in conjunction with
the protocol for providing the connectionless-mode network
service (ISO 8473)", ISO/IEC 10589:2002, Second Edition,
November 2002.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC4202] Kompella, K., Ed. and Y. Rekhter, Ed., "Routing Extensions
in Support of Generalized Multi-Protocol Label Switching
(GMPLS)", RFC 4202, DOI 10.17487/RFC4202, October 2005,
<https://www.rfc-editor.org/info/rfc4202>.
[RFC5304] Li, T. and R. Atkinson, "IS-IS Cryptographic
Authentication", RFC 5304, DOI 10.17487/RFC5304, October
2008, <https://www.rfc-editor.org/info/rfc5304>.
[RFC5305] Li, T. and H. Smit, "IS-IS Extensions for Traffic
Engineering", RFC 5305, DOI 10.17487/RFC5305, October
2008, <https://www.rfc-editor.org/info/rfc5305>.
[RFC5307] Kompella, K., Ed. and Y. Rekhter, Ed., "IS-IS Extensions
in Support of Generalized Multi-Protocol Label Switching
(GMPLS)", RFC 5307, DOI 10.17487/RFC5307, October 2008,
<https://www.rfc-editor.org/info/rfc5307>.
[RFC5310] Bhatia, M., Manral, V., Li, T., Atkinson, R., White, R.,
and M. Fanto, "IS-IS Generic Cryptographic
Authentication", RFC 5310, DOI 10.17487/RFC5310, February
2009, <https://www.rfc-editor.org/info/rfc5310>.
[RFC6119] Harrison, J., Berger, J., and M. Bartlett, "IPv6 Traffic
Engineering in IS-IS", RFC 6119, DOI 10.17487/RFC6119,
February 2011, <https://www.rfc-editor.org/info/rfc6119>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[RFC8570] Ginsberg, L., Ed., Previdi, S., Ed., Giacalone, S., Ward,
D., Drake, J., and Q. Wu, "IS-IS Traffic Engineering (TE)
Metric Extensions", RFC 8570, DOI 10.17487/RFC8570, March
2019, <https://www.rfc-editor.org/info/rfc8570>.
[RFC8667] Previdi, S., Ed., Ginsburg, L., Ed., Filsfils, C.,
Bashandy, A., Gredler, H., and B. Decraene, "IS-IS
Extensions for Segment Routing", RFC 8667,
DOI 10.17487/RFC8667, December 2019,
<https://www.rfc-editor.org/info/rfc8667>.
7.2. Informative References
[RFC4655] Farrel, A., Vasseur, JP., and J. Ash, "A Path Computation
Element (PCE)-Based Architecture", RFC 4655,
DOI 10.17487/RFC4655, August 2006,
<https://www.rfc-editor.org/info/rfc4655>.
[RFC8402] Filsfils, C., Ed., Previdi, S., Ed., Ginsberg, L.,
Decraene, B., Litkowski, S., and R. Shakir, "Segment
Routing Architecture", RFC 8402, DOI 10.17487/RFC8402,
July 2018, <https://www.rfc-editor.org/info/rfc8402>.
Appendix A. Example Encoding
Below is an example encoding of L2 Bundle advertisements in a case
where we have two parallel adjacencies to the same neighbor whose
system-id is 1234.1234.1234.00. The two L2 bundles have the
following sets of attributes:
L3 Adjacency #1
L3 IPv4 local link address: 192.0.2.1
Four bundle members with the following attributes:
+-----+---------------+-----------+----------------+
| Num | Link Local ID | Bandwidth | Adj-SID/Weight |
+=====+===============+===========+================+
| 1 | 0x11111111 | 1G | 0x11111/1 |
+-----+---------------+-----------+----------------+
| 2 | 0x11112222 | 1G | 0x11112/1 |
+-----+---------------+-----------+----------------+
| 3 | 0x11113333 | 10G | 0x11113/1 |
+-----+---------------+-----------+----------------+
| 4 | 0x11114444 | 10G | 0x11114/1 |
+-----+---------------+-----------+----------------+
Table 3
L3 Adjacency #2
L3 IPv4 local link address: 192.0.2.2
Three bundle members with the following attributes:
+-----+---------------+-----------+----------------+
| Num | Link Local ID | Bandwidth | Adj-SID/Weight |
+=====+===============+===========+================+
| 1 | 0x22221111 | 10G | 22221/1 |
+-----+---------------+-----------+----------------+
| 2 | 0x22222222 | 10G | 22222/1 |
+-----+---------------+-----------+----------------+
| 3 | 0x22223333 | 10G | 22223/1 |
+-----+---------------+-----------+----------------+
Table 4
This requires two TLVs, one for each L3 adjacency.
TLV for Adjacency #1:
0 1
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type(25) | Length(64) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Parent L3 Neighbor Descriptor
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Neighbor System-ID octets 1-4: 1234.1234 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| System-ID octets 5-6: 1234 | P-node: 00 |1|0|0|0|0|0|0|0|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
IPv4 Interface Address Sub-TLV
0 1
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type(6) | Length(4) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| IPv4 address: 192.0.2.1 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
L2 Bundle Attribute Descriptors
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|Len:9+6+10 = 25| # Desc: 2 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Link Local Identifier Bundle Member #1: 0x11111111 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Link Local Identifier Bundle Member #2: 0x11112222 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Maximum Link Bandwidth Sub-TLV
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type(9) | Length(4) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Bandwidth Value: 1G/8 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
L2 Bundle Member Adj-SID Sub-TLV
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type(41) | Length(8) |0|0|1|1|0|0|0|0| Weight: 1 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Local Label Bundle Member #1: 0x11111 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Local Label Bundle Member #2: 0x11112 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
L2 Bundle Attribute Descriptors
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|Len:9+6+10 = 25| # Desc: 2 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Link Local Identifier Bundle Member #3: 0x11113333 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Link Local Identifier Bundle Member #4: 0x11114444 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Maximum Link Bandwidth Sub-TLV
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type(9) | Length(4) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Bandwidth Value: 10G/8 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
L2 Bundle Member Adj-SID Sub-TLV
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type(41) | Length(8) |0|0|1|1|0|0|0|0| Weight: 1 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Local Label Bundle Member #3: 0x11113 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Local Label Bundle Member #4: 0x11114 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
TLV for Adjacency #2:
0 1
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type(25) | Length(46) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Parent L3 Neighbor Descriptor
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Neighbor System-ID octets 1-4: 1234.1234 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| System-ID octets 5-6: 1234 | P-node: 00 |1|0|0|0|0|0|0|0|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
IPv4 Interface Address Sub-TLV
0 1
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type(6) | Length(4) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| IPv4 address: 192.0.2.2 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
L2 Bundle Attribute Descriptors
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|Len:13+6+13=32 | # Desc: 3 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Link Local Identifier Bundle Member #1: 0x22221111 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Link Local Identifier Bundle Member #2: 0x22222222 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Link Local Identifier Bundle Member #3: 0x22223333 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Maximum Link Bandwidth Sub-TLV
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type(9) | Length(4) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Bandwidth Value: 10G/8 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
L2 Bundle Member Adj-SID Sub-TLV
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type(41) | Length(11) |0|0|1|1|0|0|0|0| Weight: 1 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Local Label Bundle Member #1: 0x22221 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Local Label Bundle Member #2: 0x22222 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Local Label Bundle Member #3: 0x22223 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Acknowledgements
The authors would like to thank Jon Mitchell for his careful review.
Contributors
The following people gave a substantial contribution to the content
of this document and should be considered coauthors:
Stefano Previdi
Huawei Technologies
Italy
Email: stefano@previdi.net
Authors' Addresses
Les Ginsberg (editor)
Cisco Systems, Inc.
Email: ginsberg@cisco.com
Ahmed Bashandy
Unaffiliated
United States of America
Email: abashandy.ietf@gmail.com
Clarence Filsfils
Cisco Systems, Inc.
Email: cf@cisco.com
Mohan Nanduri
Oracle
Email: mohan.nanduri@oracle.com
Ebben Aries
Arrcus Inc.
2077 Gateway Place, Suite #400
San Jose, CA 95119
United States of America
Email: exa@arrcus.com