💾 Archived View for gemini.bortzmeyer.org › rfc-mirror › rfc9394.txt captured on 2024-02-05 at 09:49:08.
⬅️ Previous capture (2023-06-14)
-=-=-=-=-=-=-
Internet Engineering Task Force (IETF) A. Melnikov
Request for Comments: 9394 Isode
Updates: 4731, 5267 A. P. Achuthan
Category: Standards Track V. Nagulakonda
ISSN: 2070-1721 Yahoo!
L. Alves
June 2023
IMAP PARTIAL Extension for Paged SEARCH and FETCH
Abstract
The PARTIAL extension of the Internet Message Access Protocol (see
RFCs 3501 and 9051) allows clients to limit the number of SEARCH
results returned, as well as to perform incremental (paged) searches.
This also helps servers to optimize resource usage when performing
searches.
This document extends the PARTIAL SEARCH return option originally
specified in RFC 5267. It also clarifies some interactions between
RFC 5267 and RFCs 4731 and 9051.
This document updates RFCs 4731 and 5267.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
https://www.rfc-editor.org/info/rfc9394.
Copyright Notice
Copyright (c) 2023 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Revised BSD License text as described in Section 4.e of the
Trust Legal Provisions and are provided without warranty as described
in the Revised BSD License.
This document may contain material from IETF Documents or IETF
Contributions published or made publicly available before November
10, 2008. The person(s) controlling the copyright in some of this
material may not have granted the IETF Trust the right to allow
modifications of such material outside the IETF Standards Process.
Without obtaining an adequate license from the person(s) controlling
the copyright in such materials, this document may not be modified
outside the IETF Standards Process, and derivative works of it may
not be created outside the IETF Standards Process, except to format
it for publication as an RFC or to translate it into languages other
than English.
Table of Contents
1. Introduction and Overview
2. Document Conventions
3. The PARTIAL Extension
3.1. Incremental SEARCH and Partial Results
3.2. Interaction between PARTIAL, MIN, MAX, and SAVE SEARCH
Return Options
3.3. Extension to UID FETCH
3.4. Use of "PARTIAL" and "CONDSTORE" IMAP Extensions Together
4. Formal Syntax
5. Security Considerations
6. IANA Considerations
6.1. Changes/Additions to the IMAP Capabilities Registry
7. References
7.1. Normative References
7.2. Informative References
Acknowledgments
Authors' Addresses
1. Introduction and Overview
This document defines an extension to the Internet Message Access
Protocol [RFC3501] [RFC9051] for performing incremental searches and
fetches. This extension is compatible with both IMAP4rev1 [RFC3501]
and IMAP4rev2 [RFC9051]. This extension uses IMAP extensibility
rules defined in [RFC4466].
The PARTIAL extension of the Internet Message Access Protocol allows
clients to limit the number of SEARCH results returned, as well as to
perform incremental (paged) searches. This also helps servers to
optimize resource usage when performing searches.
This document extends the PARTIAL SEARCH return option originally
specified in RFC 5267. It also clarifies some interactions between
RFC 5267 and RFCs 4731 and 9051.
2. Document Conventions
In protocol examples, this document uses a prefix of "C: " to denote
lines sent by the client to the server and "S: " for lines sent by
the server to the client. Lines prefixed with "// " are comments
explaining the previous protocol line. These prefixes and comments
are not part of the protocol. Lines without any of these prefixes
are continuations of the previous line, and no line breaks are
present in the protocol unless specifically mentioned.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
Other capitalized words are IMAP key words [RFC3501] [RFC9051] or key
words from this document.
3. The PARTIAL Extension
An IMAP server advertises support for the PARTIAL extension by
including the "PARTIAL" capability in the CAPABILITY response /
response code.
3.1. Incremental SEARCH and Partial Results
The PARTIAL SEARCH return option causes the server to provide in an
ESEARCH response [RFC4731] [RFC9051] a subset of the results denoted
by the sequence range given as the mandatory argument. The first
result (message with the lowest matching Unique Identifier (UID)) is
1; thus, the first 500 results would be obtained by a return option
of "PARTIAL 1:500" and the second 500 by "PARTIAL 501:1000". This
intentionally mirrors message sequence numbers.
It is also possible to direct the server to start the SEARCH from the
latest matching (with the highest UID) message. This can be done by
prepending "-" to the index. For example, -1 is the last message, -2
is next to the last, and so on. Using this syntax helps server
implementations to optimize their SEARCHes.
A single command MUST NOT contain more than one PARTIAL or ALL search
return option; that is, either one PARTIAL, one ALL, or neither
PARTIAL nor ALL is allowed.
For SEARCH results, the entire list of results MUST be ordered in
mailbox order -- that is, in UID or message sequence number order.
In cases where a PARTIAL SEARCH return option references results that
do not exist by using a range that starts or ends higher (or lower)
than the current number of results, the server returns the results
that are in the set. This yields a PARTIAL return data item that
has, as payload, the original range and a potentially missing set of
results that may be shorter than the extent of the range. If the
whole range references results that do not exist, a special value
"NIL" is returned by the server instead of the sequence set.
Clients need not request PARTIAL results in any particular order.
Because mailboxes may change, clients might wish to use PARTIAL in
combination with UPDATE (see [RFC5267]) if the server also advertises
the "CONTEXT=SEARCH" capability, especially if the intent is to walk
a large set of results; however, these return options do not interact
-- the UPDATE will provide notifications for all matching results.
// Let's assume that the A01 SEARCH without PARTIAL would return
// 23764 results.
C: A01 UID SEARCH RETURN (PARTIAL -1:-100) UNDELETED
UNKEYWORD $Junk
S: * ESEARCH (TAG "A01") UID PARTIAL (-1:-100 ...)
// 100 most recent results in set syntax elided.
S: A01 OK Completed.
// Let's assume that the A02 SEARCH without PARTIAL would return
// 23764 results.
C: A02 UID SEARCH RETURN (PARTIAL 23500:24000) UNDELETED
UNKEYWORD $Junk
C: A03 UID SEARCH RETURN (PARTIAL 1:500) UNDELETED
UNKEYWORD $Junk
C: A04 UID SEARCH RETURN (PARTIAL 24000:24500) UNDELETED
UNKEYWORD $Junk
S: * ESEARCH (TAG "A02") UID PARTIAL (23500:24000 ...)
// 264 results in set syntax elided;
// this spans the end of the results.
S: A02 OK Completed.
S: * ESEARCH (TAG "A03") UID PARTIAL (1:500 ...)
// 500 results in set syntax elided.
S: A03 OK Completed.
S: * ESEARCH (TAG "A04") UID PARTIAL (24000:24500 NIL)
// No results are present; this is beyond the end of the results.
S: A04 OK Completed.
3.2. Interaction between PARTIAL, MIN, MAX, and SAVE SEARCH Return
Options
This section only applies if the server advertises the "PARTIAL" IMAP
capability or "CONTEXT=SEARCH" [RFC5267], together with "ESEARCH"
[RFC4731] and/or IMAP4rev2 [RFC9051].
The SAVE result option doesn't change whether the server would return
items corresponding to PARTIAL SEARCH result options.
As specified in Section 3.1, it is an error to specify both the
PARTIAL and ALL result options in the same SEARCH command.
When the SAVE result option is combined with the PARTIAL result
option and none of the MIN/MAX/COUNT result options are present, the
corresponding PARTIAL is returned, and the "$" marker would contain
references to all messages returned by the PARTIAL result option.
When the SAVE and PARTIAL result options are combined with the MIN or
MAX result option and the COUNT result option is absent, the
corresponding PARTIAL result and MIN/MAX are returned (if the SEARCH
result is not empty), and the "$" marker would contain references to
all messages returned by the PARTIAL result option together with the
corresponding MIN/MAX message.
If the SAVE and PARTIAL result options are combined with both the MIN
and MAX result options and the COUNT result option is absent, the
PARTIAL, MIN, and MAX result options are returned (if the SEARCH
result is not empty), and the "$" marker would contain references to
all messages returned by the PARTIAL result option together with the
MIN and MAX messages.
If the SAVE and PARTIAL result options are combined with the COUNT
result option, the PARTIAL and COUNT result options are returned, and
the "$" marker would always contain references to all messages found
by the SEARCH or UID SEARCH command.
Table 1 summarizes additional requirements for ESEARCH server
implementations described in this section.
Note regarding Table 1: "[m]" means optional "MIN" and/or "MAX".
+===============================+=====================+
| Combination of Result Options | "$" Marker Value |
+===============================+=====================+
| SAVE PARTIAL | PARTIAL |
+-------------------------------+---------------------+
| SAVE PARTIAL MIN | PARTIAL & MIN |
+-------------------------------+---------------------+
| SAVE PARTIAL MAX | PARTIAL & MAX |
+-------------------------------+---------------------+
| SAVE PARTIAL MIN MAX | PARTIAL & MIN & MAX |
+-------------------------------+---------------------+
| SAVE PARTIAL COUNT [m] | all found messages |
+-------------------------------+---------------------+
Table 1
3.3. Extension to UID FETCH
The PARTIAL extension also extends the UID FETCH command with a
PARTIAL FETCH modifier. The PARTIAL FETCH modifier has the same
syntax as the PARTIAL SEARCH result option. The presence of the
PARTIAL FETCH modifier instructs the server to only return FETCH
results for messages in the specified range. It is useful when the
sequence-set (first) parameter in the UID FETCH command includes an
unknown number of messages.
// Returning information for the last 3 messages in the UID range
C: 10 UID FETCH 25900:26600 (UID FLAGS) (PARTIAL -1:-3)
S: * 12888 FETCH (FLAGS (\Seen) UID 25996)
S: * 12889 FETCH (FLAGS (\Flagged \Answered) UID 25997)
S: * 12890 FETCH (FLAGS () UID 26600)
S: 10 OK FETCH completed
// Returning information for the first 5 messages in the UID range
C: 11 UID FETCH 25900:26600 (UID FLAGS) (PARTIAL 1:5)
S: * 12591 FETCH (FLAGS (\Seen) UID 25900)
S: * 12592 FETCH (FLAGS (\Flagged) UID 25902)
S: * 12593 FETCH (FLAGS (\Answered) UID 26310)
S: * 12594 FETCH (FLAGS () UID 26311)
S: * 12595 FETCH (FLAGS (\Answered) UID 26498)
S: 11 OK FETCH completed
3.4. Use of "PARTIAL" and "CONDSTORE" IMAP Extensions Together
This section is informative.
The PARTIAL FETCH modifier can be combined with the CHANGEDSINCE
FETCH modifier [RFC7162].
// Returning information for the last 30 messages in the UID range
// that have any flags/keywords modified since MODSEQ 98305
C: 101 UID FETCH 25900:26600 (UID FLAGS
) (PARTIAL -1:-30 CHANGEDSINCE 98305)
S: * 12888 FETCH (FLAGS (\Flagged \Answered
) MODSEQ (98306) UID 25997)
S: * 12890 FETCH (FLAGS () MODSEQ (98312) UID 26600)
S: 101 OK FETCH completed
The above example causes the server to first select the last 30
messages and then only return flag changes for a subset of those
messages that have MODSEQ higher than 98305.
Note that the order of PARTIAL and CHANGEDSINCE FETCH modifiers in
the UID FETCH command is not important, i.e., the above example can
also use the "UID FETCH 25900:26600 (UID FLAGS) (CHANGEDSINCE 98305
PARTIAL -1:-30)" command and it would result in the same responses.
4. Formal Syntax
The following syntax specification uses the Augmented Backus-Naur
Form (ABNF) notation as specified in [ABNF].
Non-terminals referenced but not defined below are as defined by
IMAP4rev1 [RFC3501] or IMAP4rev2 [RFC9051].
Except as noted otherwise, all alphabetic characters are case
insensitive. The use of uppercase or lowercase characters to define
token strings is for editorial clarity only. Implementations MUST
accept these strings in a case-insensitive fashion.
SP = <Defined in RFC 5234>
MINUS = "-"
capability =/ "PARTIAL"
;; <capability> from [RFC3501].
modifier-partial = "PARTIAL" SP partial-range
partial-range-first = nz-number ":" nz-number
;; Request to search from oldest (lowest UIDs) to
;; more recent messages.
;; A range 500:400 is the same as 400:500.
;; This is similar to <seq-range> from [RFC3501]
;; but cannot contain "*".
partial-range-last = MINUS nz-number ":" MINUS nz-number
;; Request to search from newest (highest UIDs) to
;; oldest messages.
;; A range -500:-400 is the same as -400:-500.
partial-range = partial-range-first / partial-range-last
search-return-opt =/ modifier-partial
;; All conform to <search-return-opt> from
;; [RFC4466] and [RFC9051].
search-return-data =/ ret-data-partial
ret-data-partial = "PARTIAL"
SP "(" partial-range SP partial-results ")"
;; <partial-range> is the requested range.
partial-results = sequence-set / "NIL"
;; <sequence-set> from [RFC3501].
;; NIL indicates that no results correspond to
;; the requested range.
tagged-ext-simple =/ partial-range-last
fetch-modifier =/ modifier-partial
;; <fetch-modifier> from [RFC4466].
5. Security Considerations
This document defines an additional IMAP4 capability. As such, it
does not change the underlying security considerations of IMAP4rev1
[RFC3501] and IMAP4rev2 [RFC9051]. The authors and reviewers believe
that no new security issues are introduced with these additional
IMAP4 capabilities.
This document defines an optimization that can reduce both the amount
of work performed by the server and the amount of data returned to
the client. Use of this extension is likely to cause the server and
the client to use less memory than when the extension is not used.
However, as this is going to be new code in both the client and the
server, rigorous testing of such code is required in order to avoid
introducing new implementation bugs.
6. IANA Considerations
6.1. Changes/Additions to the IMAP Capabilities Registry
IMAP4 capabilities are registered by publishing a Standards Track or
IESG-approved Informational or Experimental RFC. The registry is
currently located at <https://www.iana.org/assignments/imap-
capabilities>.
IANA has added the PARTIAL extension to the "IMAP Capabilities"
registry with RFC 9394 as the reference.
7. References
7.1. Normative References
[ABNF] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax
Specifications: ABNF", STD 68, RFC 5234,
DOI 10.17487/RFC5234, January 2008,
<https://www.rfc-editor.org/info/rfc5234>.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC3501] Crispin, M., "INTERNET MESSAGE ACCESS PROTOCOL - VERSION
4rev1", RFC 3501, DOI 10.17487/RFC3501, March 2003,
<https://www.rfc-editor.org/info/rfc3501>.
[RFC4466] Melnikov, A. and C. Daboo, "Collected Extensions to IMAP4
ABNF", RFC 4466, DOI 10.17487/RFC4466, April 2006,
<https://www.rfc-editor.org/info/rfc4466>.
[RFC4731] Melnikov, A. and D. Cridland, "IMAP4 Extension to SEARCH
Command for Controlling What Kind of Information Is
Returned", RFC 4731, DOI 10.17487/RFC4731, November 2006,
<https://www.rfc-editor.org/info/rfc4731>.
[RFC5267] Cridland, D. and C. King, "Contexts for IMAP4", RFC 5267,
DOI 10.17487/RFC5267, July 2008,
<https://www.rfc-editor.org/info/rfc5267>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[RFC9051] Melnikov, A., Ed. and B. Leiba, Ed., "Internet Message
Access Protocol (IMAP) - Version 4rev2", RFC 9051,
DOI 10.17487/RFC9051, August 2021,
<https://www.rfc-editor.org/info/rfc9051>.
7.2. Informative References
[RFC7162] Melnikov, A. and D. Cridland, "IMAP Extensions: Quick Flag
Changes Resynchronization (CONDSTORE) and Quick Mailbox
Resynchronization (QRESYNC)", RFC 7162,
DOI 10.17487/RFC7162, May 2014,
<https://www.rfc-editor.org/info/rfc7162>.
Acknowledgments
This document was motivated by the Yahoo! team and their questions
about best client practices for dealing with large mailboxes.
The authors of this document would like to thank the following
people, who provided useful comments or participated in discussions
of this document: Timo Sirainen and Barry Leiba.
This document uses a lot of text from RFC 5267. Thus, the work of
the RFC 5267 authors -- Dave Cridland and Curtis King -- is
appreciated.
Authors' Addresses
Alexey Melnikov
Isode Limited
Email: alexey.melnikov@isode.com
URI: https://www.isode.com
Arun Prakash Achuthan
Yahoo!
Email: arunprakash@myyahoo.com
Vikram Nagulakonda
Yahoo!
Email: nvikram_imap@yahoo.com
Luis Alves
Email: luis.alves@lafaspot.com