💾 Archived View for gemini.bortzmeyer.org › rfc-mirror › rfc4146.txt captured on 2024-02-05 at 11:41:14.
⬅️ Previous capture (2021-11-30)
-=-=-=-=-=-=-
Network Working Group R. Gellens
Request for Comments: 4146 QUALCOMM
Category: Informational August 2005
Simple New Mail Notification
Status of This Memo
This memo provides information for the Internet community. It does
not specify an Internet standard of any kind. Distribution of this
memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (2005).
Abstract
This memo documents a long-standing technique, supported by a large
number of mail servers, which allows users to be notified of new
mail. In addition to server support, there are a number of clients
that support this, ranging from full email clients to specialized
clients whose only purpose is to receive new mail notifications and
alert a mail client.
In brief, the server sends the string "nm_notifyuser" CRLF to the
finger port on the IP address (either configured or last used) of the
user who has received new mail.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Conventions Used in this Document . . . . . . . . . . . . . . 2
3. Simple Mail Notification . . . . . . . . . . . . . . . . . . 2
4. Example . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
5. Security Considerations . . . . . . . . . . . . . . . . . . 3
6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 3
7. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . 3
Gellens Informational [Page 1]
RFC 4146 Simple New Mail Notification August 2005
1. Introduction
There is a long-standing technique supported by a large number of
mail servers that allows users to be notified of new mail. In
addition to server support, there are a number of clients that
support this, ranging from full email clients to specialized clients
whose only purpose is to receive new mail notifications and alert a
mail client. This technique is sometimes known as "notify mail"
(after a shareware client of the same name), "biff", and the "finger
hack".
2. Conventions Used in This Document
In examples, "C:" indicates lines sent by the client, and "S:"
indicates those sent by the server. Line breaks within a command
example are for editorial purposes only. Line breaks in the protocol
are indicated by "CRLF".
3. Simple Mail Notification
With this technique, the server sends the string "nm_notifyuser"
immediately followed by CRLF to the finger port on the IP address for
the user who has received new mail. The finger port is 79. Note
that only the port for finger is used; the finger protocol itself is
not used.
The IP address to use may be configured, or the server may use the IP
address that was last used to check mail by the user. Typically,
this is a per-account configuration option.
On the client system, a process must be listening to the finger port
to be useful. When it receives the "nm_notifyuser" string, it takes
a configured action, typically instructing a mail client to fetch
mail.
Normally, a TCP connection to the target computer is opened, the
"nm_notifyuser" string is sent, and the connection is closed without
waiting for a response.
In some cases, UDP is used instead of TCP, but the default and
general practice is TCP. Even though only a single message in one
direction is sent (with no reply), TCP is used most often, probably
for reliability.
There is an assumption that the client listening on an IP address
only has responsibility for one email account. If a client can check
multiple accounts and receives the "nm_notifyuser" string, it does
not know which account received the mail.
Gellens Informational [Page 2]
RFC 4146 Simple New Mail Notification August 2005
There is a requirement that a finger daemon not be active on the
client.
4. Example
This example assumes that new mail has arrived at the server
mail.isp.example.com for account fastness@example.net. The server
has determined an IP address to which notification should be sent.
C: <listens on TCP port 79>
S: <opens TCP connection to IP address port 79>
C: <accepts inbound connection on port 79>
S: nm_notifyuserCRLF
S: <closes TCP connection>
5. Security Considerations
There is no assurance that the "nm_notifyuser" message is being sent
to the correct IP address. Nor does the listening agent on the
client system have any assurance that an "nm_notifyuser" string was
sent by a mail server that has received new mail for the user.
It is trivial for an attacker to send large numbers of
"nm_notifyuser" messages to a targeted system. Client systems that
are listening for this message SHOULD implement protections against
being flooded with notifications. Many server systems already
implement protections against users logging in and checking mail too
frequently.
Because use of this protocol requires that a port be open with an
agent listening on it, if that agent contains vulnerabilities, it may
create a remotely exploitable attack (for example, buffer overflows
that permit an attacker to execute arbitrary code on the client
system with the permissions of the agent). As usual, with a process
listening on a port, the process should execute with the least
possible privilege level and access.
6. IANA Considerations
The notify mail hack (and this document) should be included as an
additional usage for port 79.
7. Acknowledgments
The NotifyMail shareware utility was written by Scott Gruby.
Gellens Informational [Page 3]
RFC 4146 Simple New Mail Notification August 2005
Author's Address
Randall Gellens
QUALCOMM Incorporated
6455 Lusk Blvd.
San Diego, CA 92121-2779
USA
EMail: randy@qualcomm.com
Gellens Informational [Page 4]
RFC 4146 Simple New Mail Notification August 2005
Full Copyright Statement
Copyright (C) The Internet Society (2005).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at ietf-
ipr@ietf.org.
Acknowledgement
Funding for the RFC Editor function is currently provided by the
Internet Society.
Gellens Informational [Page 5]