💾 Archived View for spam.works › mirrors › textfiles › computers › ASTRESEARCH › 0682.tb captured on 2023-12-28 at 22:28:55.
⬅️ Previous capture (2023-06-16)
-=-=-=-=-=-=-
=============================================================================
AST RESEARCH, INC. TECHNICAL BULLETIN #0682 05-06-91
=============================================================================
AST PREMIUM SYSTEMS WITH BUILT-IN MOUSE PORTS AND ADIC'S DCB
When installing two ADIC DCB controller cards, Channel 1 and Channel 2 in an
AST computer, errors will occur on the second DCB controller which is Channel
2, (i.e., Channel 2 will fail to initialize under Novell Netware environment
and will also fail ADIC diagnostics).
The problem lies with IRQ12, which supports the PS/2 mouse port. ADIC's DCB
controller card Channel 2 is hard wired, this cannot be changed. (IRQ12 is
accepted as Industry Standard for PS/2 mouse port). ADIC's Technical Support
recommends that the customer using the DCB Channel 2, switch and use DCB
controller Channel 3 which uses IRQ10. Customers experiencing the above
problem should contact ADIC's Technical Support to exchange DCB controller
cards.