💾 Archived View for spam.works › mirrors › textfiles › computers › ASTRESEARCH › 0222a.tb captured on 2023-12-28 at 22:20:30.
⬅️ Previous capture (2023-06-16)
-=-=-=-=-=-=-
AST RESEARCH TECHNICAL BULLETIN TB-O222A 09/18/86
AST RAMPAGE PAK
The silkscreen on the AST RAMpage-PAK I/O piggy back board is
incorrectly marked with regards to COM2. At the bottom of the
board on the port enable jumper block, is a set of horizontal
pins labeled CM2 (see drawing). These are not the correct pins
form enabling COM2. The third set from the left, of vertically
placed pins is the correct set of pins to be jumpered for
enabling COM2. Affected assemblies: 202078-301X3.
NOTE: As a portion of the data is in pictorial form, it is not
included here. To obtain a complete copy of this
technical bulletin, contact:
AST RESEARCH, INC.
2121 Alton Avenue
Irvine, California 92714-4992
Attention: Product Support
(Technical Bulletin)