💾 Archived View for station.martinrue.com › mntn › 621e58d770304c0c96012f193c8d152a captured on 2023-12-28 at 17:49:54. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2023-05-24)
-=-=-=-=-=-=-
Finished the prototype for my handheld DIY computer (really a Raspberry Pi Zero dock). It boots! The soldering is terrible and the joints will probably break if I bump it too hard but it boots! Will do a write up when I have time.
2 years ago · 👍 nristen, thatsredadcted, kevinsan, aka_dude, mc, cobradile94, devyl, syntheist
@kevinsan thanks for the tip, I'll try that next time. · 2 years ago
hot-melt glue can make your solder joints more resilient. if you use the craft stuff (thin flexible sticks for a mini heat-gun), then they can also be removed easily. · 2 years ago
That sounds really interesting. Look forward to more details. · 2 years ago
I wanted to do something like the EOMA68 project has been doing, but for the Pi Zero. For one thing, it's smaller and absurdly cheap. For another thing, I didn't have to use any custom components except for the case, so it's already done. Although I will probably do a custom PCB for version 2. · 2 years ago