💾 Archived View for gmi.noulin.net › man › man5 › tzfile.5.gmi captured on 2023-12-28 at 17:36:38. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2022-06-12)
-=-=-=-=-=-=-
TZFILE(5) Linux Programmer's Manual TZFILE(5)
NAME
tzfile - timezone information
DESCRIPTION
The timezone information files used by tzset(3) are typically found under a directory with a name like /usr/share/zoneinfo. These files use the format described
in Internet RFC 8536. Each file is a sequence of 8-bit bytes. In a file, a binary integer is represented by a sequence of one or more bytes in network order
(bigendian, or high-order byte first), with all bits significant, a signed binary integer is represented using two's complement, and a boolean is represented by
a one-byte binary integer that is either 0 (false) or 1 (true). The format begins with a 44-byte header containing the following fields:
* The magic four-byte ASCII sequence “TZif” identifies the file as a timezone information file.
* A byte identifying the version of the file's format (as of 2017, either an ASCII NUL, or “2”, or “3”).
* Fifteen bytes containing zeros reserved for future use.
* Six four-byte integer values, in the following order:
tzh_ttisutcnt
The number of UT/local indicators stored in the file. (UT is Universal Time.)
tzh_ttisstdcnt
The number of standard/wall indicators stored in the file.
tzh_leapcnt
The number of leap seconds for which data entries are stored in the file.
tzh_timecnt
The number of transition times for which data entries are stored in the file.
tzh_typecnt
The number of local time types for which data entries are stored in the file (must not be zero).
tzh_charcnt
The number of bytes of time zone abbreviation strings stored in the file.
The above header is followed by the following fields, whose lengths depend on the contents of the header:
* tzh_timecnt four-byte signed integer values sorted in ascending order. These values are written in network byte order. Each is used as a transition time (as
returned by time(2)) at which the rules for computing local time change.
* tzh_timecnt one-byte unsigned integer values; each one but the last tells which of the different types of local time types described in the file is associated
with the time period starting with the same-indexed transition time and continuing up to but not including the next transition time. (The last time type is
present only for consistency checking with the POSIX-style TZ string described below.) These values serve as indices into the next field.
* tzh_typecnt ttinfo entries, each defined as follows:
struct ttinfo {
int32_t tt_utoff;
unsigned char tt_isdst;
unsigned char tt_desigidx;
};
Each structure is written as a four-byte signed integer value for tt_utoff, in network byte order, followed by a one-byte boolean for tt_isdst and a one-byte
value for tt_desigidx. In each structure, tt_utoff gives the number of seconds to be added to UT, tt_isdst tells whether tm_isdst should be set by local‐
time(3) and tt_desigidx serves as an index into the array of time zone abbreviation bytes that follow the ttinfo structure(s) in the file. The tt_utoff value
is never equal to -2**31, to let 32-bit clients negate it without overflow. Also, in realistic applications tt_utoff is in the range [-89999, 93599] (i.e.,
more than -25 hours and less than 26 hours); this allows easy support by implementations that already support the POSIX-required range [-24:59:59, 25:59:59].
* tzh_leapcnt pairs of four-byte values, written in network byte order; the first value of each pair gives the nonnegative time (as returned by time(2)) at which
a leap second occurs; the second is a signed integer specifying the total number of leap seconds to be applied during the time period starting at the given
time. The pairs of values are sorted in ascending order by time. Each transition is for one leap second, either positive or negative; transitions always sep‐
arated by at least 28 days minus 1 second.
* tzh_ttisstdcnt standard/wall indicators, each stored as a one-byte boolean; they tell whether the transition times associated with local time types were speci‐
fied as standard time or local (wall clock) time.
* tzh_ttisutcnt UT/local indicators, each stored as a one-byte boolean; they tell whether the transition times associated with local time types were specified as
UT or local time. If a UT/local indicator is set, the corresponding standard/wall indicator must also be set.
The standard/wall and UT/local indicators were designed for transforming a TZif file's transition times into transitions appropriate for another time zone speci‐
fied via a POSIX-style TZ string that lacks rules. For example, when TZ="EET-2EEST" and there is no TZif file "EET-2EEST", the idea was to adapt the transition
times from a TZif file with the well-known name "posixrules" that is present only for this purpose and is a copy of the file "Europe/Brussels", a file with a
different UT offset. POSIX does not specify this obsolete transformational behavior, the default rules are installation-dependent, and no implementation is
known to support this feature for timestamps past 2037, so users desiring (say) Greek time should instead specify TZ="Europe/Athens" for better historical cover‐
age, falling back on TZ="EET-2EEST,M3.5.0/3,M10.5.0/4" if POSIX conformance is required and older timestamps need not be handled accurately.
The localtime(3) function normally uses the first ttinfo structure in the file if either tzh_timecnt is zero or the time argument is less than the first transi‐
tion time recorded in the file.
Version 2 format
For version-2-format timezone files, the above header and data are followed by a second header and data, identical in format except that eight bytes are used for
each transition time or leap second time. (Leap second counts remain four bytes.) After the second header and data comes a newline-enclosed, POSIX-TZ-environ‐
ment-variable-style string for use in handling instants after the last transition time stored in the file or for all instants if the file has no transitions.
The POSIX-style TZ string is empty (i.e., nothing between the newlines) if there is no POSIX representation for such instants. If nonempty, the POSIX-style TZ
string must agree with the local time type after the last transition time if present in the eight-byte data; for example, given the string
“WET0WEST,M3.5.0,M10.5.0/3” then if a last transition time is in July, the transition's local time type must specify a daylight-saving time abbreviated “WEST”
that is one hour east of UT. Also, if there is at least one transition, time type 0 is associated with the time period from the indefinite past up to but not
including the earliest transition time.
Version 3 format
For version-3-format timezone files, the POSIX-TZ-style string may use two minor extensions to the POSIX TZ format, as described in newtzset(3). First, the
hours part of its transition times may be signed and range from -167 through 167 instead of the POSIX-required unsigned values from 0 through 24. Second, DST is
in effect all year if it starts January 1 at 00:00 and ends December 31 at 24:00 plus the difference between daylight saving and standard time.
Interoperability considerations
Future changes to the format may append more data.
Version 1 files are considered a legacy format and should be avoided, as they do not support transition times after the year 2038. Readers that only understand
Version 1 must ignore any data that extends beyond the calculated end of the version 1 data block.
Writers should generate a version 3 file if TZ string extensions are necessary to accurately model transition times. Otherwise, version 2 files should be gener‐
ated.
The sequence of time changes defined by the version 1 header and data block should be a contiguous subsequence of the time changes defined by the version 2+
header and data block, and by the footer. This guideline helps obsolescent version 1 readers agree with current readers about timestamps within the contiguous
subsequence. It also lets writers not supporting obsolescent readers use a tzh_timecnt of zero in the version 1 data block to save space.
Time zone designations should consist of at least three (3) and no more than six (6) ASCII characters from the set of alphanumerics, “-”, and “+”. This is for
compatibility with POSIX requirements for time zone abbreviations.
When reading a version 2 or 3 file, readers should ignore the version 1 header and data block except for the purpose of skipping over them.
Readers should calculate the total lengths of the headers and data blocks and check that they all fit within the actual file size, as part of a validity check
for the file.
Common interoperability issues
This section documents common problems in reading or writing TZif files. Most of these are problems in generating TZif files for use by older readers. The
goals of this section are:
* to help TZif writers output files that avoid common pitfalls in older or buggy TZif readers,
* to help TZif readers avoid common pitfalls when reading files generated by future TZif writers, and
* to help any future specification authors see what sort of problems arise when the TZif format is changed.
When new versions of the TZif format have been defined, a design goal has been that a reader can successfully use a TZif file even if the file is of a later TZif
version than what the reader was designed for. When complete compatibility was not achieved, an attempt was made to limit glitches to rarely used timestamps,
and to allow simple partial workarounds in writers designed to generate new-version data useful even for older-version readers. This section attempts to docu‐
ment these compatibility issues and workarounds, as well as to document other common bugs in readers.
Interoperability problems with TZif include the following:
* Some readers examine only version 1 data. As a partial workaround, a writer can output as much version 1 data as possible. However, a reader should ignore
version 1 data, and should use version 2+ data even if the reader's native timestamps have only 32 bits.
* Some readers designed for version 2 might mishandle timestamps after a version 3 file's last transition, because they cannot parse extensions to POSIX in the
TZ-like string. As a partial workaround, a writer can output more transitions than necessary, so that only far-future timestamps are mishandled by version 2
readers.
* Some readers designed for version 2 do not support permanent daylight saving time, e.g., a TZ string “EST5EDT,0/0,J365/25” denoting permanent Eastern Daylight
Time (-04). As a partial workaround, a writer can substitute standard time for the next time zone east, e.g., “AST4” for permanent Atlantic Standard Time
(-04).
* Some readers ignore the footer, and instead predict future timestamps from the time type of the last transition. As a partial workaround, a writer can output
more transitions than necessary.
* Some readers do not use time type 0 for timestamps before the first transition, in that they infer a time type using a heuristic that does not always select
time type 0. As a partial workaround, a writer can output a dummy (no-op) first transition at an early time.
* Some readers mishandle timestamps before the first transition that has a timestamp not less than -2**31. Readers that support only 32-bit timestamps are
likely to be more prone to this problem, for example, when they process 64-bit transitions only some of which are representable in 32 bits. As a partial work‐
around, a writer can output a dummy transition at timestamp -2**31.
* Some readers mishandle a transition if its timestamp has the minimum possible signed 64-bit value. Timestamps less than -2**59 are not recommended.
* Some readers mishandle POSIX-style TZ strings that contain “<” or “>”. As a partial workaround, a writer can avoid using “<” or “>” for time zone abbrevia‐
tions containing only alphabetic characters.
* Many readers mishandle time zone abbreviations that contain non-ASCII characters. These characters are not recommended.
* Some readers may mishandle time zone abbreviations that contain fewer than 3 or more than 6 characters, or that contain ASCII characters other than alphanumer‐
ics, “-”, and “+”. These abbreviations are not recommended.
* Some readers mishandle TZif files that specify daylight-saving time UT offsets that are less than the UT offsets for the corresponding standard time. These
readers do not support locations like Ireland, which uses the equivalent of the POSIX TZ string “IST-1GMT0,M10.5.0,M3.5.0/1”, observing standard time (IST,
+01) in summer and daylight saving time (GMT, +00) in winter. As a partial workaround, a writer can output data for the equivalent of the POSIX TZ string
“GMT0IST,M3.5.0/1,M10.5.0”, thus swapping standard and daylight saving time. Although this workaround misidentifies which part of the year uses daylight sav‐
ing time, it records UT offsets and time zone abbreviations correctly.
Some interoperability problems are reader bugs that are listed here mostly as warnings to developers of readers.
* Some readers do not support negative timestamps. Developers of distributed applications should keep this in mind if they need to deal with pre-1970 data.
* Some readers mishandle timestamps before the first transition that has a nonnegative timestamp. Readers that do not support negative timestamps are likely to
be more prone to this problem.
* Some readers mishandle time zone abbreviations like “-08” that contain “+”, “-”, or digits.
* Some readers mishandle UT offsets that are out of the traditional range of -12 through +12 hours, and so do not support locations like Kiritimati that are out‐
side this range.
* Some readers mishandle UT offsets in the range [-3599, -1] seconds from UT, because they integer-divide the offset by 3600 to get 0 and then display the hour
part as “+00”.
* Some readers mishandle UT offsets that are not a multiple of one hour, or of 15 minutes, or of 1 minute.
SEE ALSO
time(2), localtime(3), tzset(3), tzselect(8), zdump(8), zic(8).
Olson A, Eggert P, Murchison K. The Time Zone Information Format (TZif). 2019 Feb. Internet RFC 8536 ⟨https://www.rfc-editor.org/info/rfc8536⟩
doi:10.17487/RFC8536 ⟨https://doi.org/10.17487/RFC8536⟩.
2020-04-27 TZFILE(5)