πŸ’Ύ Archived View for gmi.noulin.net β€Ί man β€Ί man3 β€Ί setbuffer.3.gmi captured on 2023-12-28 at 17:20:14. Gemini links have been rewritten to link to archived content

View Raw

More Information

⬅️ Previous capture (2023-09-08)

-=-=-=-=-=-=-

SETBUF(3)                                                               Linux Programmer's Manual                                                              SETBUF(3)

NAME
       setbuf, setbuffer, setlinebuf, setvbuf - stream buffering operations

SYNOPSIS
       #include <stdio.h>

       int setvbuf(FILE *restrict stream, char *restrict buf,
                   int mode, size_t size);

       void setbuf(FILE *restrict stream, char *restrict buf);
       void setbuffer(FILE *restrict stream, char *restrict buf,
                   size_t size);
       void setlinebuf(FILE *stream);

   Feature Test Macro Requirements for glibc (see feature_test_macros(7)):

       setbuffer(), setlinebuf():
           Since glibc 2.19:
               _DEFAULT_SOURCE
           Glibc 2.19 and earlier:
               _BSD_SOURCE

DESCRIPTION
       The three types of buffering available are unbuffered, block buffered, and line buffered.  When an output stream is unbuffered, information appears on the desti‐
       nation file or terminal as soon as written; when it is block buffered, many characters are saved up and written as a block; when it is line buffered,  characters
       are  saved  up until a newline is output or input is read from any stream attached to a terminal device (typically stdin).  The function fflush(3) may be used to
       force the block out early.  (See fclose(3).)

       Normally all files are block buffered.  If a stream refers to a terminal (as stdout normally does), it is line buffered.  The standard error stream stderr is al‐
       ways unbuffered by default.

       The setvbuf() function may be used on any open stream to change its buffer.  The mode argument must be one of the following three macros:

              _IONBF unbuffered

              _IOLBF line buffered

              _IOFBF fully buffered

       Except  for unbuffered files, the buf argument should point to a buffer at least size bytes long; this buffer will be used instead of the current buffer.  If the
       argument buf is NULL, only the mode is affected; a new buffer will be allocated on the next read or write operation.  The setvbuf() function may be used only af‐
       ter opening a stream and before any other operations have been performed on it.

       The other three calls are, in effect, simply aliases for calls to setvbuf().  The setbuf() function is exactly equivalent to the call

           setvbuf(stream, buf, buf ? _IOFBF : _IONBF, BUFSIZ);

       The  setbuffer()  function  is  the  same,  except that the size of the buffer is up to the caller, rather than being determined by the default BUFSIZ.  The set‐
       linebuf() function is exactly equivalent to the call:

           setvbuf(stream, NULL, _IOLBF, 0);

RETURN VALUE
       The function setvbuf() returns 0 on success.  It returns nonzero on failure (mode is invalid or the request cannot be honored).  It may set errno on failure.

       The other functions do not return a value.

ATTRIBUTES
       For an explanation of the terms used in this section, see attributes(7).

       β”Œβ”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”€β”€β”€β”€β”
       β”‚Interface                                                                                                                             β”‚ Attribute     β”‚ Value   β”‚
       β”œβ”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€β”€β”€β”€β”€
       β”‚setbuf(), setbuffer(), setlinebuf(), setvbuf()                                                                                        β”‚ Thread safety β”‚ MT-Safe β”‚
       β””β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”€β”€β”€β”€β”˜

CONFORMING TO
       The setbuf() and setvbuf() functions conform to C89 and C99.

NOTES
       POSIX notes that the value of errno is unspecified after a call to setbuf() and further notes that, since the value of errno is not required to be unchanged  af‐
       ter a successful call to setbuf(), applications should instead use setvbuf() in order to detect errors.

BUGS
       You must make sure that the space that buf points to still exists by the time stream is closed, which also happens at program termination.  For example, the fol‐
       lowing is invalid:

       #include <stdio.h>

       int
       main(void)
       {
           char buf[BUFSIZ];
           setbuf(stdout, buf);
           printf("Hello, world!\n");
           return 0;
       }

SEE ALSO
       stdbuf(1), fclose(3), fflush(3), fopen(3), fread(3), malloc(3), printf(3), puts(3)

Linux                                                                          2021-03-22                                                                      SETBUF(3)