💾 Archived View for gmi.noulin.net › man › man2 › timer_create.2.gmi captured on 2023-12-28 at 16:28:58. Gemini links have been rewritten to link to archived content

View Raw

More Information

⬅️ Previous capture (2022-06-12)

-=-=-=-=-=-=-

TIMER_CREATE(2)                                                         Linux Programmer's Manual                                                        TIMER_CREATE(2)

NAME
       timer_create - create a POSIX per-process timer

SYNOPSIS
       #include <signal.h>           /* Definition of SIGEV_* constants */
       #include <time.h>

       int timer_create(clockid_t clockid, struct sigevent *restrict sevp,
                        timer_t *restrict timerid);

       Link with -lrt.

   Feature Test Macro Requirements for glibc (see feature_test_macros(7)):

       timer_create():
           _POSIX_C_SOURCE >= 199309L

DESCRIPTION
       timer_create()  creates  a  new  per-process  interval  timer.  The ID of the new timer is returned in the buffer pointed to by timerid, which must be a non-null
       pointer.  This ID is unique within the process, until the timer is deleted.  The new timer is initially disarmed.

       The clockid argument specifies the clock that the new timer uses to measure time.  It can be specified as one of the following values:

       CLOCK_REALTIME
              A settable system-wide real-time clock.

       CLOCK_MONOTONIC
              A nonsettable monotonically increasing clock that measures time from some unspecified point in the past that does not change after system startup.

       CLOCK_PROCESS_CPUTIME_ID (since Linux 2.6.12)
              A clock that measures (user and system) CPU time consumed by (all of the threads in) the calling process.

       CLOCK_THREAD_CPUTIME_ID (since Linux 2.6.12)
              A clock that measures (user and system) CPU time consumed by the calling thread.

       CLOCK_BOOTTIME (Since Linux 2.6.39)
              Like CLOCK_MONOTONIC, this is a monotonically increasing clock.  However, whereas the CLOCK_MONOTONIC clock does not measure the time while  a  system  is
              suspended,  the CLOCK_BOOTTIME clock does include the time during which the system is suspended.  This is useful for applications that need to be suspend-
              aware.  CLOCK_REALTIME is not suitable for such applications, since that clock is affected by discontinuous changes to the system clock.

       CLOCK_REALTIME_ALARM (since Linux 3.0)
              This clock is like CLOCK_REALTIME, but will wake the system if it is suspended.  The caller must have the CAP_WAKE_ALARM capability  in  order  to  set  a
              timer against this clock.

       CLOCK_BOOTTIME_ALARM (since Linux 3.0)
              This  clock  is  like  CLOCK_BOOTTIME,  but will wake the system if it is suspended.  The caller must have the CAP_WAKE_ALARM capability in order to set a
              timer against this clock.

       CLOCK_TAI (since Linux 3.10)
              A system-wide clock derived from wall-clock time but ignoring leap seconds.

       See clock_getres(2) for some further details on the above clocks.

       As well as the above values, clockid can be specified as the clockid returned by a call to clock_getcpuclockid(3) or pthread_getcpuclockid(3).

       The sevp argument points to a sigevent structure that specifies how the caller should be notified when the timer expires.  For the definition and general details
       of this structure, see sigevent(7).

       The sevp.sigev_notify field can have the following values:

       SIGEV_NONE
              Don't asynchronously notify when the timer expires.  Progress of the timer can be monitored using timer_gettime(2).

       SIGEV_SIGNAL
              Upon  timer  expiration, generate the signal sigev_signo for the process.  See sigevent(7) for general details.  The si_code field of the siginfo_t struc‐
              ture will be set to SI_TIMER.  At any point in time, at most one signal is queued to the process for a given timer; see timer_getoverrun(2) for  more  de‐
              tails.

       SIGEV_THREAD
              Upon timer expiration, invoke sigev_notify_function as if it were the start function of a new thread.  See sigevent(7) for details.

       SIGEV_THREAD_ID (Linux-specific)
              As  for  SIGEV_SIGNAL, but the signal is targeted at the thread whose ID is given in sigev_notify_thread_id, which must be a thread in the same process as
              the caller.  The sigev_notify_thread_id field specifies a kernel thread ID, that is, the value returned by clone(2) or gettid(2).  This flag  is  intended
              only for use by threading libraries.

       Specifying  sevp  as  NULL  is  equivalent  to  specifying  a  pointer to a sigevent structure in which sigev_notify is SIGEV_SIGNAL, sigev_signo is SIGALRM, and
       sigev_value.sival_int is the timer ID.

RETURN VALUE
       On success, timer_create() returns 0, and the ID of the new timer is placed in *timerid.  On failure, -1 is returned, and errno is set to indicate the error.

ERRORS
       EAGAIN Temporary error during kernel allocation of timer structures.

       EINVAL Clock ID, sigev_notify, sigev_signo, or sigev_notify_thread_id is invalid.

       ENOMEM Could not allocate memory.

       ENOTSUP
              The kernel does not support creating a timer against this clockid.

       EPERM  clockid was CLOCK_REALTIME_ALARM or CLOCK_BOOTTIME_ALARM but the caller did not have the CAP_WAKE_ALARM capability.

VERSIONS
       This system call is available since Linux 2.6.

CONFORMING TO
       POSIX.1-2001, POSIX.1-2008.

NOTES
       A program may create multiple interval timers using timer_create().

       Timers are not inherited by the child of a fork(2), and are disarmed and deleted during an execve(2).

       The kernel preallocates a "queued real-time signal" for each timer created  using  timer_create().   Consequently,  the  number  of  timers  is  limited  by  the
       RLIMIT_SIGPENDING resource limit (see setrlimit(2)).

       The timers created by timer_create() are commonly known as "POSIX (interval) timers".  The POSIX timers API consists of the following interfaces:

       *  timer_create(): Create a timer.

       *  timer_settime(2): Arm (start) or disarm (stop) a timer.

       *  timer_gettime(2): Fetch the time remaining until the next expiration of a timer, along with the interval setting of the timer.

       *  timer_getoverrun(2): Return the overrun count for the last timer expiration.

       *  timer_delete(2): Disarm and delete a timer.

       Since Linux 3.10, the /proc/[pid]/timers file can be used to list the POSIX timers for the process with PID pid.  See proc(5) for further information.

       Since  Linux  4.10, support for POSIX timers is a configurable option that is enabled by default.  Kernel support can be disabled via the CONFIG_POSIX_TIMERS op‐
       tion.

   C library/kernel differences
       Part of the implementation of the POSIX timers API is provided by glibc.  In particular:

       *  Much of the functionality for SIGEV_THREAD is implemented within glibc, rather than the kernel.  (This is necessarily so, since the thread  involved  in  han‐
          dling  the notification is one that must be managed by the C library POSIX threads implementation.)  Although the notification delivered to the process is via
          a thread, internally the NPTL implementation uses a sigev_notify value of SIGEV_THREAD_ID along with a real-time signal that is reserved by the implementation
          (see nptl(7)).

       *  The  implementation of the default case where evp is NULL is handled inside glibc, which invokes the underlying system call with a suitably populated sigevent
          structure.

       *  The timer IDs presented at user level are maintained by glibc, which maps these IDs to the timer IDs employed by the kernel.

       The POSIX timers system calls first appeared in Linux 2.6.  Prior to this, glibc provided an incomplete user-space implementation  (CLOCK_REALTIME  timers  only)
       using POSIX threads, and in glibc versions before 2.17, the implementation falls back to this technique on systems running pre-2.6 Linux kernels.

EXAMPLES
       The program below takes two arguments: a sleep period in seconds, and a timer frequency in nanoseconds.  The program establishes a handler for the signal it uses
       for the timer, blocks that signal, creates and arms a timer that expires with the given frequency, sleeps for the specified number of seconds, and then  unblocks
       the  timer  signal.  Assuming that the timer expired at least once while the program slept, the signal handler will be invoked, and the handler displays some in‐
       formation about the timer notification.  The program terminates after one invocation of the signal handler.

       In the following example run, the program sleeps for 1 second, after creating a timer that has a frequency of 100 nanoseconds.  By the time  the  signal  is  un‐
       blocked and delivered, there have been around ten million overruns.

           $ ./a.out 1 100
           Establishing handler for signal 34
           Blocking signal 34
           timer ID is 0x804c008
           Sleeping for 1 seconds
           Unblocking signal 34
           Caught signal 34
               sival_ptr = 0xbfb174f4;     *sival_ptr = 0x804c008
               overrun count = 10004886

   Program source

       #include <stdint.h>
       #include <stdlib.h>
       #include <unistd.h>
       #include <stdio.h>
       #include <signal.h>
       #include <time.h>

       #define CLOCKID CLOCK_REALTIME
       #define SIG SIGRTMIN

       #define errExit(msg)    do { perror(msg); exit(EXIT_FAILURE); \
                               } while (0)

       static void
       print_siginfo(siginfo_t *si)
       {
           timer_t *tidp;
           int or;

           tidp = si->si_value.sival_ptr;

           printf("    sival_ptr = %p; ", si->si_value.sival_ptr);
           printf("    *sival_ptr = %#jx\n", (uintmax_t) *tidp);

           or = timer_getoverrun(*tidp);
           if (or == -1)
               errExit("timer_getoverrun");
           else
               printf("    overrun count = %d\n", or);
       }

       static void
       handler(int sig, siginfo_t *si, void *uc)
       {
           /* Note: calling printf() from a signal handler is not safe
              (and should not be done in production programs), since
              printf() is not async-signal-safe; see signal-safety(7).
              Nevertheless, we use printf() here as a simple way of
              showing that the handler was called. */

           printf("Caught signal %d\n", sig);
           print_siginfo(si);
           signal(sig, SIG_IGN);
       }

       int
       main(int argc, char *argv[])
       {
           timer_t timerid;
           struct sigevent sev;
           struct itimerspec its;
           long long freq_nanosecs;
           sigset_t mask;
           struct sigaction sa;

           if (argc != 3) {
               fprintf(stderr, "Usage: %s <sleep-secs> <freq-nanosecs>\n",
                       argv[0]);
               exit(EXIT_FAILURE);
           }

           /* Establish handler for timer signal. */

           printf("Establishing handler for signal %d\n", SIG);
           sa.sa_flags = SA_SIGINFO;
           sa.sa_sigaction = handler;
           sigemptyset(&sa.sa_mask);
           if (sigaction(SIG, &sa, NULL) == -1)
               errExit("sigaction");

           /* Block timer signal temporarily. */

           printf("Blocking signal %d\n", SIG);
           sigemptyset(&mask);
           sigaddset(&mask, SIG);
           if (sigprocmask(SIG_SETMASK, &mask, NULL) == -1)
               errExit("sigprocmask");

           /* Create the timer. */

           sev.sigev_notify = SIGEV_SIGNAL;
           sev.sigev_signo = SIG;
           sev.sigev_value.sival_ptr = &timerid;
           if (timer_create(CLOCKID, &sev, &timerid) == -1)
               errExit("timer_create");

           printf("timer ID is %#jx\n", (uintmax_t) timerid);

           /* Start the timer. */

           freq_nanosecs = atoll(argv[2]);
           its.it_value.tv_sec = freq_nanosecs / 1000000000;
           its.it_value.tv_nsec = freq_nanosecs % 1000000000;
           its.it_interval.tv_sec = its.it_value.tv_sec;
           its.it_interval.tv_nsec = its.it_value.tv_nsec;

           if (timer_settime(timerid, 0, &its, NULL) == -1)
                errExit("timer_settime");

           /* Sleep for a while; meanwhile, the timer may expire
              multiple times. */

           printf("Sleeping for %d seconds\n", atoi(argv[1]));
           sleep(atoi(argv[1]));

           /* Unlock the timer signal, so that timer notification
              can be delivered. */

           printf("Unblocking signal %d\n", SIG);
           if (sigprocmask(SIG_UNBLOCK, &mask, NULL) == -1)
               errExit("sigprocmask");

           exit(EXIT_SUCCESS);
       }

SEE ALSO
       clock_gettime(2), setitimer(2), timer_delete(2), timer_getoverrun(2), timer_settime(2), timerfd_create(2), clock_getcpuclockid(3), pthread_getcpuclockid(3),
       pthreads(7), sigevent(7), signal(7), time(7)

Linux                                                                          2021-03-22                                                                TIMER_CREATE(2)