💾 Archived View for eoghan.speleo.dev › posts › 2017 › strat.gmi captured on 2023-12-28 at 15:18:30. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2022-03-01)
-=-=-=-=-=-=-
Date: 2017-05-12
Last Updated: 2017-05-12
In 2011, I got a EMG HZ pre-wired scratchplate. It had two passive EMG humbuckers and a master volume & tone. Over time I removed the neck pickup, partially due to lack of use, partially to resemble this guitar.
Now (May 2017) that I have become more savvy with a soldering iron, I have rewired the system, retaining only the EMG HZ bridge pickup, and the three way selector switch. I did this on the cheap by cannibalising the components that came on the original scratchplate that came with the guitar. I installed a master volume and tone, and the three way switch. The trick is that I wired the switch such that the bridge Position gives the humbucker's coils in series (this is the standard way a humbucker is wired), middle position gives a coil tap, and the neck position gives the humbucker's coils in parallel. This actually gives quite a nice range of sounds for a one pickup guitar, and I find myself liking the parallel position more than the series position.
My schematic:
NB I have a funny feeling that the volume potentiometer is 250 kΩ, this is contrary to what I have written in my schematic.
