💾 Archived View for lofi.haiku-os.org › docs › develop › packages › Bootstrapping.gmi captured on 2023-12-28 at 15:23:36. Gemini links have been rewritten to link to archived content

-=-=-=-=-=-=-

Bootstrapping Haiku

Even a very basic Haiku requires a set of third-party packages (ICU, zlib,…), a Haiku sufficiently complete to build software even more (binutils, gcc, make,…). So whenever something fundamental in Haiku (the architecture ABI, the ABI of libroot) changes in a binary incompatible way, or when Haiku is ported to a new architecture, it is necessary to bootstrap Haiku and a basic set of required third-party packages. This document describes how this process works.

Prerequisites

So far the bootstrap build has only been tested on Linux. It will probably also work on FreeBSD and other Unixes. Haiku is not yet supported as a build platform.

A required prerequisite for the bootstrap build is a checkout of the haikuporter, the haikuports, and the haikuports.cross repositories from the

Github HaikuPorts site

Additional build tools are required for the build platform:

autoconf

automake

cmake (For compiling python_bootstrap)

ncurses_development (For compiling texinfo_bootstrap)

All the usual prerequisites for building Haiku.

Configuring and Building

1. Configure the Haiku build with all usual parameters, but add the "--bootstrap" option with its three parameters, the paths to the checked out haikuporter *script* (eg. "../haikuporter/haikuporter"), haikuports.cross, and haikuports repositories folders:

.../configure ... --bootstrap path/to/haikuporter path/to/haikuports.cross path/to/haikuports

It is important that you build outside the tree, as otherwise the build will fail!

2. Build a bootstrap Haiku image:

jam -q @bootstrap-raw

3. Boot the bootstrap Haiku (e.g. in a virtual machine), edit the file “/boot/home/haikuports/haikuports.config” – entering your email address in the “PACKAGER” field – and finally open a Terminal and build the third-party packages:

cd haikuports
haikuporter --do-bootstrap

In the “packages” subdirectory the built packages are collected. This is the initial set of packages for the HaikuPorts packages repository, plus the source packages the Haiku build system put in your generated directory under “objects/haiku/<arch>/packaging/repositories/HaikuPorts-sources-build/packages” (ignore the “rigged” source packages). With these packages a HaikuPorts package repository can be built and in turn a regular Haiku can be built using it. Further packages can then be built on the regular Haiku.

Further hints:

Of course, as usual, “-j<number>” can be passed to the jam building the bootstrap Haiku. Building the bootstrap third-party packages, which is part of this process, will take quite some time anyway. Since those packages are built sequentially, the jam variable “HAIKU_PORTER_CONCURRENT_JOBS” can be defined to the number of jobs that shall be used to build a package.

Instead of “bootstrap-raw” the build profile “bootstrap-vmware” can be used as well. You can also define your own build profile, e.g. for building to a partition. As long as its name starts with “bootstrap-” that will result in a bootstrap Haiku.

"haikuporter" also supports the “-j<number>” option to specify the number of jobs to use. Even on real hardware this step will nevertheless take a long time.

The jam variable HAIKU_PORTER_EXTRA_OPTIONS can be defined to any options that should be passed to "haikuporter" ("--debug" is handy for showing python strack traces, for instance).

How it works

Building the bootstrap Haiku image is in principle quite similar to building a regular Haiku image, save for the following differences:

Some parts of a regular Haiku that aren’t needed for building packages are omitted (e.g. the Demos, MediaPlayer, the OpenGL API,…).

Certain third-party packages that aren’t needed for building packages are omitted as well.

The third-party packages are not downloaded from some package repository. Instead for each package a bootstrap version is built from the sources using "haikuporter" and the respective build recipe from haikuports.cross.

"haikuporter" itself and ready-to-build (“rigged”) source packages for all needed final third-party packages are copied to the image.

Obviously the last two points are the juicy parts. Building a bootstrap third-party package – unless it is a pure data package – requires certain parts of Haiku; usually the headers, libroot and other libraries, and the glue code. For some Haiku libraries we do already need certain third-party packages. So there’s a bit of ping pong going on:

Initially the build system builds a package “haiku_cross_devel_sysroot_stage1_<arch>.hpkg”. It contains the essentials for cross-compiling bootstrap third-party packages, but nothing that itself depends on a third-party package.

Once all third-party packages required for it have been built, a more complete “haiku_cross_devel_sysroot_<arch>.hpkg” is built. It is used to cross-compile the remaining third-party packages.

The rigged source packages (and regular source packages) are built via "haikuporter" from the regular haikuports repository checkout. haikuports contains build recipes for a lot of software. Which source packages should be built is determined by the build system by checking what packages are needed for the target build profile used by the bootstrap process. This defaults to “minimum-raw”, but it can be changed by setting the jam variable “HAIKU_BOOTSTRAP_SOURCES_PROFILE” (i.e. "jam -sHAIKU_BOOTSTRAP_SOURCES_PROFILE=@release-raw -q @bootstrap-raw" will include source packages for all packages needed by release image).

Format of hpkg Source Repository

For Haikuporter to use source or “rigged” packages instead of requesting packages from a remote url (essential during bootstrap when patch, git, curl, etc are unavailable), haikuporter works on an empty haikuports repository with the following layout:

haikuports/input-source-packages Contains all input source (or source_rigged) hpkgs

haikuports/FormatVersions Contains "RecipeFormatVersion=1" so haikuporter can identify the haikuports repository

After "haikuporter" is given this directory structure, it will parse the source or “rigged” packages, and allow you to build them internally replacing the SOURCE_URI with "pkg:input-source-packages/"

This process is generally automated during the generation of the bootstrap image, but manual setup may be needed if the bootstrap image is non-functional on your target platform.

Haiku Architecture Ports

When preparing a new Haiku architecture port for the bootstrap build the following things need to be considered:

There need to be repository definitions “build/jam/repositories/HaikuPorts/<arch>” and “build/jam/repositories/HaikuPortsCross/<arch>”. The former lists the packages available for a regular Haiku, i.e. it must include at least the packages needed for a basic Haiku image that can build third-party packages. The latter lists the available bootstrap third-party packages.

There needs to be “src/data/package_infos/<arch>/haiku”, a package info for the Haiku system package (currently also used for the bootstrap package).

In the haikuports.cross repository all build recipes need to support the architecture (the architecture must be listed in the “ARCHITECTURES” variable). Some software may need to be patched for cross-building to work for the architecture.

In the haikuports repository all build recipes for required software need to support the architecture.

If the Haiku architecture port doesn’t support a working userland yet, the process obviously cannot go further than building the bootstrap Haiku image.