💾 Archived View for lofi.haiku-os.org › docs › develop › kernel › pci_serial_debug.gmi captured on 2023-12-28 at 15:26:32. Gemini links have been rewritten to link to archived content

-=-=-=-=-=-=-

Using PCI serial ports for debugging

Modern systems usually don’t come with a built-in serial port anymore. This is unconvenient for low level debugging, since the serial port allows access to early boot log as well as kernel debugger, even when the display or keyboard are not working.

It is fortunately possible to add a serial port over the PCI bus on machines which have appropriate expansion ports. This can be done using expresscard, mini-PCI, or PCI express ports.

Devices known to work

Dexlan XMT01A (

https://www.accessoires-informatiques.com/Prix/EXPRESSCARD-PCIE-POUR-PORTABLE-23842.html

)Uses MOSCHIP 9922 controller

Devices to be tested

https://smile.amazon.com/Industrial-Desktop-Bracket-Moschip-MCS9922/dp/B003D3MFHM/

Configuring

Install the card in your computer

Boot Haiku and look in the syslog for the PCI bus scan for the device:

KERN: PCI: [dom 0, bus  5] bus   5, device  0, function  0: vendor 9710, device 9922, revision 00
KERN: PCI:   class_base 07, class_function 00, class_api 02
KERN: PCI:   vendor 9710: MosChip Semiconductor Technology Ltd.
KERN: PCI:   device 9922: MCS9922 PCIe Multi-I/O Controller
KERN: PCI:   info: Communication controller (Serial controller, 16550)
KERN: PCI:   line_size 10, latency 00, header_type 80, BIST 00
KERN: PCI:   ROM base host 00000000, pci 00000000, size 00000000
KERN: PCI:   cardbus_CIS 00000000, subsystem_id 1000, subsystem_vendor_id a000
KERN: PCI:   interrupt_line 0b, interrupt_pin 01, min_grant 00, max_latency 00
KERN: PCI:   base reg 0: host 00004000, pci 0000KERN: 4000, size 00000008, flags 01
KERN: PCI:   base reg 1: host f1c01000, pci f1c01000, size 00001000, flags 00
KERN: PCI:   base reg 2: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 3: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 4: host 00000000, pci 00000000, size 00000000, flags 00
KERN: PCI:   base reg 5: host f1c00000, pci f1c00000, size 00001000, flags 00
KERN: PCI:   Capabilities: MSI, PM, PCIe
KERN: PCI:   Extended capabilities: Virtual Channel, Advanced Error Reporting

Write down the address of “base reg 0”, this is where the serial port registers are mapped (it is probably possible to get this information from lspci on Linux as well?)

Configure serial debug in config/settings/kernel/drivers/kernel:

serial_debug_output true
serial_debug_speed 115200
serial_debug_port 0x4000

Now your kernel is configured to send its output to the serial port. You can connect another machine to it (using an USB to serial adapter and a NULL modem cable, for example) and use SerialConnect or a similar tool to see the output and access the KDL prompt.

Happy debugging!