šŸ’¾ Archived View for gemini.mcgillij.dev ā€ŗ vfio_part4.gmi captured on 2023-12-28 at 15:37:13. Gemini links have been rewritten to link to archived content

View Raw

More Information

ā¬…ļø Previous capture (2022-03-01)

-=-=-=-=-=-=-

Odds and Ends

:author:

mcgillij

:category:

Linux

:date:

2020-12-28 14:52

:tags:

Linux, VFIO, Virtualization, Tutorial, BIOS, #100DaysToOffload

:slug:

vfio-part4

:cover_image:

oddsandends.jpg

:summary:

BIOS and optimizations

Contents

Misc Odds and Ends

While all the other steps are pretty universal, there are a couple places where the configurations or settings may diverge based on what your goals are or what hardware you have available.

======================================================================

BIOS / UEFI

Iā€™ll start with BIOS settings, for me Iā€™m using a

x570 Aorus Master from Gigabyte

, so the settings I will be outlining will be more pertinent to those using similar boards. However itā€™s just a matter of finding where your vendors are hiding the similar settings in their UEFI UIā€™s.

First things first youā€™ll need to enable your CPU specific VM instructions, for me thatā€™s SVM.

[image: AMD SVM]

Next weā€™ll want to hunt down the IOMMU settings in a couple places in the BIOS.

[image: IOMMU]

[image: IOMMU in NBIO settings]

Make sure these settings are set to ā€œEnabledā€ and not ā€œAutoā€ as thatā€™s a workaround for Windows machines and arenā€™t entirely enabled.

Depending on what type of PCIe setup you have going with your GPUā€™s and which ones your going to be passing through, you may want to change which PCIe slot is to be used for your initial display, this will help with not binding the GPU to your kernelā€™s driver.

[image: PCIe]

Lastly we will want to disable CSM support, as this will likely interfere with booting up your machine fully with UEFI.

[image: Disable CSM]

From here this should be your baseline configuration for a working GPU pass through for the x570 Aorus Master or any other Gigabyte board that shares the same BIOSā€™s. You can save this as a profile, that you can then toggle whichever other settings you may want to get working on your board (XMP, OC, etc). But for the sake of getting pass through working this is the baseline that I work from before going and tweaking other things.

======================================================================

Host

There are a number of host level optimizations that you can do to your VM once you get it up and running and have validated that everythingā€™s working properly.

CPU

CPU pinning is one of them, and the folks over at the

Arch Wiki

, have a great section on this that can be

found here

. Donā€™t worry about the information being Arch specific, most of the directions there are portable to just about any distro around. You can go even further with this and isolate the CPUs as well but it all depends on the work-loads that your going to be dealing with as thereā€™s no silver bullet for ā€˜optimalā€™ performance in every case.

AMD

There are some AMD CPU specific optimization available as well. Generally you will want to start off by configuring your CPU section in the virt-manager with settings similar to this:

[image: CPU Topology]

To enable AMD SMT (hyperthreads), you will need to manually edit the XML file ( "virsh edit win10") for your virtual machine and add an extension to the cpu block. Add the "<feature policy='require' name='topoext'/>" below the topology section in your XML as seen below.

<cpu mode='host-passthrough' check='none'>
  <topology sockets='1' cores='8' threads='2'/>
  <feature policy='require' name='topoext'/>
</cpu>

Once thatā€™s in place, you can actually change your configuration to look like:

[image: AMD SMT]

Not only does this more accurately correspond to your actual CPU configuration, you should get a bit of a bump in performance.

Networking

There a ton of different ways to configure your network with various bridge devices, actual hardware pass through, NATā€™ing etc. However I personally find the best way to get networking on a ā€œWindowsā€ guest in particular is to use the VirtIO driver from Redhat.

[image: Network]

Selecting this option before you create your VM has the added benefit of not allowing any networking of your Windows 10 VM right after your installation (until you install the VirtIO drivers). Which gives you a bit of breathing room to clean up and block things like Windows Updates from Microsoft downloading just a whole bunch of garbage to your machine.

[image: Actual footage from Windows 10 installation]

Actual footage from Windows 10 installationThis allows you to setup mitigations against this and turn off services that generally will install that stuff during the installation. This is also a very optimized driver provided by RedHat. Alternatively if your motherboard has multiple NICā€™s you can pass one through directly to the VM however the VirtIO driver will give it a run for itā€™s money when it comes to performance.

NVMe vs a Block

If you have (or want) to still be able to dual boot into your windows disk, you have a couple options available to you. Passing through the entire PCIe controller for your NVMe device works great. Or you can pass it in as a Block device, this will however require you to install the VirtIO drivers mentioned previously ā€œduringā€ the Windows installation process. There is very little performance loss from doing this, and you get the added benefit of easier snapshots / backups and better support for moving the VM around.

======================================================================

Guest

Most of the guest level optimizations, are pretty standard Windows things.

Here are a couple great resources for removing the garbage from Windows, these are best done prior to putting Windows on the network and allowing it to run any Windows updates. However I highly recommend that you go over the configurations for these applications as they could leave your VM in a bad state. Like anything else donā€™t blindly run anything from the internet without going over it.

Sophia

Sycnex win10 debloater

Either of these work pretty well for getting rid of most of the telemetry that Microsoft puts in their products. However since were running in a VM, we can further limit this by applying our own firewall rules to the VMs, but thatā€™s not in scope for this.

Part 3

|

Demo Video